[javadm]

I own a Marshal ME29 running on Rockchip, once I tryed to change its firmware, but I found that it would not accept any firmware other than its own, and during this experience my player was dead several time and rescued using the short circuit (hardware method recovery) [I even had the too many bad block error, and even the NAND or FixTool could not recover it and gave me the set flash type error, Once even windows could not detect my device, So the ONLY escape was to use the hardware recover method]. Because the main rock chip is hidden in this model, I am going to explain it step by step to other guys using this device and curious enough to struggle with the firmware.

1. While opening take care cause the speaker is pasted on the cover and might be disconnected from the chip

2. The chip you are to paly with to find the recovery pins is under the sd/mmc reader part of device

3. Connect the device, run the firmware update software load the firmware included in pack CD and keep an eye to the tray

4. With the top and back of the device toward yourself move your mini screwdriver slowly on the pins on the right side of the chip

5. As soon as you saw the save remove ROCKUSB indicator in the tray, prees the update button , FINI

Good Luck