[javadm]

I own a Marshal Me29 running on Rockchip, I tried to use other firmwares on it but everytime I had a Dead player [once the too many bad blocks error that even the NAND or Fixtool gave me the set flash type error, once even windows could not detect it] and the short circuit 9hardware recovery method could save it Always. As the chip to use the recovery method hidden in this model, I am going to explain how to do it for the other guys using this decice.

1. While opening take care not to disconnect the speaker attached to the back cover from the chip borad (by the way two holes to screw are hidden under the front screen)

2. Connet the palyer and run the Customer Firmware Update and load the firmware incloded in the pack CD, then keep an eye on the tray

4. The chip to play the recovery method on is under the SD/MMC reader part, put the device with the top and back towards yourself and move your mini-screwdriver slowly on the set of right side pins

5. As soon as you saw the Safe remove ROCKUSB indicator in the tray, press the update button, tha's all !!

Good Luck