[moneytothemax]

Hi,
I got a hacked "4GB GEN3" mp4 player from hailetele on ebay. It looks just like the one on the top of this page but it is silver. After getting black screen with hourglass I attempted to update the firmware using mp3player utilities V4.05 upgrade tool. After I did this things got worse. The player would turn on with blank screen switched off and would show up "new usb device" when plugged in but could not be recognised by windows and the upgrade tool would not find it!
With a bit of help from the users on this page I finally managed to get Windows to recognise it.
What I did was this:
Copied a new AdfuUpdate.inf to my windows folder, This is it:



[Version]
Signature="$CHICAGO$"
Class=USB
ClassGUID={36FC9E60-C465-11CF-8056-444553540000}
provider=%MSFT%
LayoutFile=LAYOUT.INF
DriverVer=11/22/2006,3.3.0.0

[Manufacturer]
%MfgName%=Upgrade

[Upgrade]
%USB\VID_10D6&PID_8888.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_8888
%USB\VID_10D6&PID_ff51.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_ff51
%USB\VID_10D6&PID_ff61.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_ff61
%USB\VID_10D6&PID_ff63.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_ff63
%USB\VID_10D6&PID_ff66.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_ff66
%USB\VID_10D6&PID_ff79.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_ff79

[PreCopySection]
HKR,,NoSetupUI,,1

[DestinationDirs]
umss.files = 10,System32\Drivers

[MDisk.install]
CopyFiles=umss.files
AddReg=umss.addreg

[MDisk.install.NT]
CopyFiles=umss.files
AddReg=umss.addreg

[MDisk.install.NT.Services]
Addservice = AdfuUd, 0x00000002, AdfuUd_AddService

[AdfuUd_AddService]
DisplayName = %USB\VID_10D6&PID_1160.DeviceDesc%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %10%\System32\Drivers\AdfuUd.sys
LoadOrderGroup = Base

[umss.addreg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,AdfuUd.SYS

[umss.files]
AdfuUd.sys

[SourceDisksNames]
1000 = "USB Mass Storage Device",,,

[SourceDisksFiles]
AdfuUd.SYS = 1000

[Strings]
MSFT="MP3Player"
MfgName="MP3Player"
USB\VID_10D6&PID_8888.DeviceDesc="USB ADFU Device"
USB\VID_10D6&PID_ff51.DeviceDesc="USB 2.0 (FS) ADFU Device"
USB\VID_10D6&PID_ff61.DeviceDesc="USB 2.0 (HS) ADFU Device"
USB\VID_10D6&PID_ff63.DeviceDesc="USB 2.0 (HS) ADFU Device"
USB\VID_10D6&PID_ff66.DeviceDesc="USB 2.0 (HS) ADFU Device"
USB\VID_10D6&PID_ff79.DeviceDesc="USB 2.0 (HS) ADFU Device"



After copying this file I had to Right Click on file AdfuUpdate.inf and select install. After that I'd plug in the player and wait for windows to detect it, manual choose hardware - select from list - all devices - browse for file - windows\adfuupdate.inf.
After all this the upgrade tool would finally recognise the player again but unfortunately no firmware I have tried to date has managed to get this player working again.
ANYONE WHO CAN PLEASE HELP!!
I think I need a full firmware for this player.
It is a 1GB player that looks like the one at the top of this page and uses a nokia phone battery. Has a 2" screen, single speaker and mic. On the board inside is written: v4500-92v1.0 20070729
The memory chip is a hynix 8Gigabit flash ROM (1 gigabyte)
The main chip is a ATJ2092N
The small chip has an SPT logo and I think says SP3757AHN
If anyone knows where to find this firmware I would be Oh so very grateful and of course share my success/failure with everyone.