Full Firmware files above v9.0.43 are very rare because they cannot be extracted by current tools. Unfortunately there are different versions of each firmware release for each hardware configuration. This makes it at best a nightmare, at worst impossible to locate the correct firmware file to revive "dead" players. However an s1clone image should enable you to revive your own player if it dies so I would do one now before too late! If your player is a "Glacier" style one, with the removable battery, peel off the sticky paper under the battery and get the chip numbers (particulary on the 2 largest chips). If you can see a board serial number, note that too. My firmware was 9.1.51 so this will prob not help me but could well help others.
Good luck
|