Helloa;
@Monkey_@@
First of all, yes, you got another memory as I do. That's why I want to make an important Alert right away to everybody !! I know you are pissed off if your player isn't working anymore, but please, don't try to shorten pins you are not sure off !!
You, Monkey_@@, have been luky not to touch any power supply's during shorting the same pins on your memory. You have been working on Adress inputs, which is no help, so it couldn't work :?
Second, I have to saw WOW, nice work you did, perfect picture of your chip, nice quality
and hey, WOW, finding this paper on your chip on the Internet is a very interesting job, and very helpfully for me to help you right a way. Thanks 8)
Now, let's see what we have to do. First of all, I want everybody to understand and learn something by the way. The goal is to disturb the communication during a boot up. We do this by shorting some (at least 2) pin's (and not any pin's we think of
) We only shorten the "Data I/O" pin's (Data Input / Output). So very simple.
You need at least 2, and ONLY I/O pin's.
These have to be shortened BEFORE the boot-up of the player (before the plug-in, and during plug-in, until Windows has fully understood that there is a new device plugged-in)
If you have found a documentation about your memory, you have to find the Data I/O pin's 8) The pins are always numbered (1-2-3-4-5-...) and the numer 1 is always located nearest the little hole. you count from top to the bottom and then you contine around from the bottom again to the top of the other side.
@ Monkey_@@
You have 6 possibilities:
4 and 5
7 and 8
10 and 11
44 and 45
47 and 48
50 and 51
The only problem I see with your chip, is that all this possibilities are located near to a "power supply" or a "ground" which is bad. You really have to take yourself time and patience to do this to not touch any pin next to. you will need a very good screwdriver
I wish you luck, because you will need some, with all these possibilites :? you will have to try some more times to get it work. I would even try two at the same time if you have a frind who can do the plu-in job, you can concentrate on shortening 4 - 5 - 50 - 51 at the same time. I think that will be the best solution.
If you are not sure about this, tell me, I can always send you back your picture with the pins market in red. Otherwise, take page 2 of your pdf document on which I worked on.
Best regards;
_Jim_