[Lyondegreat]

Originally Posted by Lyondegreat

:? I can only recognize it as USB Device under Other Devices(Device Manager) when i try to install it(i.e i mean device signing),i can't pass that stage where it will ask for the destination drive,what i mean is that i've tried the procedures for recovering it but the place that is dragging behind is how to install the adfuupdate.inf file,i can't pass that INSTALL FROM DISK dialogue box it keeps on asking me to insert the manufacturer's disk and then make sure that the correct drive is selected below under that it asked me to copy the manufacturer's files from:C,D,or E when i selected one of them it keeps displaying "THE SPECIFIED LOCATION DOES NOT CONTAIN THE INFORMATION ABOUT YOUR HARDWARE" ,OR is there any other way i can install the adfuupdate.inf something? B/4 i did the upgrading i extracted some info

Device Name: XINTAI MP3 Player
Productor: Wilson Co. Ltd.
Version: 9.1.52 - I assume this is a firmware,

Then i've unscrewed it and found this information:
On the Display: FPC888101C-V0.0
TM-15032 XA0750
On the PCB: TM-15032 BOCO
**2008*02*18VER:A**

I Read this from a thread that i should
"Make sure to look at your driver file AdfuUpdate.inf and see if your VID and PID reflect your unit if not just change it to the correct one of your unit and save it (use Notepad)


usually the one you need to change is PID and look as: ff51 or ff66 etc...and that is the one you change.

VID is usually 10d6

Do not change any thing but this...you need to do that on the top and at the end".
Then when i checked the Device Properties i saw this

Device Instance Id
USB\VID_10D6&PID_FF79\5&1BBE8508&0&8

Hardware Ids
USBVID_10D6&PID_FF79&REV_0100
USB\VID_10D6&PID_FF79*

I don't know how to change it and Do you think it's neccessary for me to change it,if yes i should change it to what?

Also,i have the MP3 Player Utilities V.4.09 do you think it's b/cos of this version of the Mp3 Utilities that doesn't allow me to view it as an ADFU Device 2.0?