Well that isnt enough information.
on OTHER devices that dont leave the welcome screen, i would check these things:
Memory, any external memory , remove, test, re-format replace. any internal memory test (hard to do that one)
Charge it, then DONT have the charge connected when booting
Dont have USB connected when booting
you check memory because if it is MID boot the driver things start to init and access the memory, if the memory has even slight corruption areas it might take LONG to init, or never get past it.
the reason to not have charge attached, is some devices boot different with charge attached
the reason to not have USB (or other external connections) it might be jumping into a different mode.
the reason to start with full charge , is so the voltage is all ok and you can HAVE the other stuff disconnected on boot.
good luck
|