Quote:
|
Overfilling the player memory does not destroy the firmware.
|
In my case this is the only logical conclusion:
1) My player originally worked OK with sample mp3/videos
2) The player was able to connect to PC and being identified as a USB/Flash drive
3) I connected my device to my "mpeg4 digital tellestrial television decoder with USB input
XORO XRT 7600" in order to record a video file.
4) Initially the decoder start recording on the MP4 device (the record lamp was visible).
5) After some recording time the USB was suddenly and without reason disconnected. The XORO decoder was not
able to detect it as a USB Flash drive anymore.
6) I connected to two different PCs, with different USB cables and they did not detect is as FlashDrive, but as an unknown USB device with "USB\VID_10D6&PID_FF96\5&2904E43D&0&2"
7) I tried with different USB chargers that I have and connect directly to power outlet 220V (one with 200mA, one with 500mA, one with 1000mA). They cannot charge it (the charging lamp of the Charger does not lit). This device cannot be charged as long as it cannot boot up. When I connect the charger, I just hear a beep (as an error) and I do not see anything on the screen. It does not charge.
The Voltage on the battery is correct 3,73V.
if I briefly press the power-on button I just hear a beep. When I release it the unit power-offs. As long as I press the power-on button, the small blue circle in the bottom lights up. I do not think that I have to keep pressing for some hours until the battery is exhausted. Eventually, the battery will discharge if the unit is simply on the desk waiting...
Thanks,
BB