dead NANO...
 

Hi
first of all sorry for my bad english...

I bought this mp4:
http://img125.imageshack.us/img125/1...12841011ye.jpg

and unfortunely he died yesterday (bad FW upgrading...)
now I'm looking for a compatible FW to revive it...

I have tested this firmware Nano_1.5_C2.7z APPLE-M V2 3.5.35 (http://www.s1mp3.org/en/downloads_fw.php) but the message "invalid upgrade firmware file" always appears...

So, I try this one 3.2.16-3.6v.7z ATJ2085V2 3.2.16, the message "Upgrade is success! The program will exit" appears. Then I click OK buton, but nothing happens with my mp4, he still dead...

I have equal other mp4 to that he died (I bought the both together), I tried to take off the FW to place in my dead mp4 and unhappyly he did not function, what's the problem?


here's some photos that will help us to find the correct FW:

http://img459.imageshack.us/img459/9...13650014rf.jpg

http://img474.imageshack.us/img474/9...50946019bf.jpg

thank's for the help, and sorry for the poor english. :wink:
email: thiago.tessis@gmail.com

Re: dead NANO...
 

Hello

I have the same problem nut I don´t foind solution.

Please help us !!!

Re: dead NANO...
 

thiago ,

If you did not back up your firmware, then look on the cd that came w/ unit. Look for .bin file, and upload to player. This may restore at least partial functionality.
Please post results....

Re: dead NANO...
 

Problem solved, Thiago!!
I have a player like your ( an unbranded "like" Nano Pod, model number MS-818).
It was completly death after a wrong firmware upgrade!

Since it was not recognized by my PC, first I've opened the metallic cover,
and "5. Put device on recovery mode (short-circuit)" like explained in:
http://www.s1mp3.org/en/docs_deadrec...08b988899605d1

After I have used the "MP3 Player Upgrade Tool" (vers. 3.68 ) with this firmware update (thanx to Flashget and MP4PLY):
http://www.alexejw.net/firmware/MP-6...5.35%20full.7z

Completed this upgrade, the display of my player goes blue.

With "MP3 Player disk Tool" (vers. 3.68 ) perform a Format (in Quick mode) to the device.

After switch-off for two minutes.

Switch on.

Use "MP3 Player Upgrade Tool" (vers. 3.68 ) with this firmware update:
http://www.s1mp3.org/files/firmware/...Nano_1.5_C2.7z

Finished! At this point my player still go alive :D

Ciao
Max 8)