Firmware for 1'8 screen
 

Can someone give me one of those , my player is dead . . .

And I need it a lot xD


who gives it to me I give the musics from my band xD

thx a lot

Re: Firmware for 1'8 screen
 

Badada,
this isn't so simple as you think. You must get firmware made specially for your model, others won't work with it. I don't know much about mpx's (I have mine for about week) but i heard that there are 2 good methods to get good firmware:
1. Get your Board ID. When you have it, finding good firmware should be easy(but to get Board ID you must open your mpx, because it is somewhere inside it)
2. Give us photos how does your mpx look, his welcome, end and menu screen. Maybe someone will have the same model as yours and will send you firmware.
I hope it will help you :wink:

Re: Firmware for 1'8 screen
 

http://img119.imageshack.us/img119/4...copy3qb.th.jpg

those are the chips :P

woops, and in the green part is written:

mp-751cv1-stl 2005.12.2

http://img152.imageshack.us/img152/9...00597dm.th.jpg

and this is his apearance in the front *i had to remove the glass of my mp4, i broke it, it was written mp4 digital player

Re: Firmware for 1'8 screen
 

Badada,

Your photo is rather blurry, but I think I might have the same player as yours. Does it look like the one I've attached here?

http://www.mympxplayer.com/images/at...0144237707.jpg

If it does, then unfort, I can't give you the firmware for it as I can't extract it. It uses a Sunplus solution, which the s1fwx can't extract :(

Can you tell me what happened to your player? Did you you try to upgrade with another firmware?

oh.... im trying to, but i need to connect the battery again cuz it unplugued

so.... :P when u extrac its firmware, ca u send me a PM ?

Badada

I'll mention it on the site once I find a Sunplus firmware extractor. There are a few people who are after this firmware as well.

Well . . . Isnt the extract system simple ?

like you detect, and u copy the files to your computer ?

Well, i am sure that i have the same one player, but extracting firmware is smallest problem. Is your player completly dead? is the light on? Well if it is off you need to try to flash it with merged firmware from MP-693C-S.
You should get the white screen and all manus should work, but not screen :( The same firmware has 735 i think because it has the same pictures of menu and shut down. If you can help Me and yourself Please take the link on forum to help others :D

Maybe can help:
Screens of firmware
MP-693c-S Firmware

ill try to apply this firmware tomorrow *the battery has disconnected* , but ... it may work m cuz it is the exactly display of my firmware

well... is it right?

even if the battery disconnected you can work on usb connected :D Battery is not needed. Using the second firmware you can use your firmware normally, but screen wony work ;/ i am working on it and if it'll be done i say you about it.

Re: Firmware for 1'8 screen
 

I also need the firmware from the player that you have.

Re: Firmware for 1'8 screen
 

Yes and ther is the problem because we need firmware in ehich the screen will work. I don't have the f/w for my player (yet) but i think that i can work on firmware to "detect" my screen for now works only as mp3 player :D
with out screen, and works as a torch :D:D

Re: Firmware for 1'8 screen
 

Então Badada,
Já conseguiu resolver o seu problema?
O que acontece exatamente?
Já arrumou o firmware?


caso queira conversar por msn, o meu é meltfusion@bol.com.br

Haha . . . now my player still like a torch , the screen is ALL WHITE :'( damn stoopid guys, y did they made upgradeble versions for our MP4

bah

now they are all dead, or at least like zombies

and . . . i remember the other guy said something about a SUNPLUS system on it. . . when will it be ready?

Re: Firmware for 1'8 screen
 

Badada,

Do you have the CD that came with it?

Look for Sunplus software on CD. Install. Run it and tell us what happens...

I

On the cd is not the sunplus soft but there is only mps tools and nothing more. I think i go to shop and try to ask about the firmware, but i think it don't work cause it is hipermarket :( I'm still searching......

Re: Firmware for 1'8 screen
 

bojer,

is it the firmware that you want?


if so, try that:

http://www.le-mon.com/Download%5CMPV920%5Cmpv920.zip

This may help Badada http://www.mympxplayer.com/viewtopic.php?t=339

They have a firmware for a player that looks like yours.

:D:D:D:D HURRA !!
This is working! Yeagh! Thanks to all of you

bojer that is great news, please tell us how you got it going again. :)

Well this firmware is 3.2.16(3.2.13) . To write it i turn player into adfu mode and then flash :D:D

This is all! This firmware is better than this which was first on my player :D

Re: Firmware for 1'8 screen
 

Good to hear that some people are recovering their dead machines, and in your case ending up with a better firmware than your original one.

Take Care bojer.