MyMPx.org - DEAD PLAYER RECOVERY GUIDE

MyMPx.org (http://mympx.org/forum/)

- Dead Players (http://mympx.org/forum/dead-players/)

- - DEAD PLAYER RECOVERY GUIDE (http://mympx.org/forum/dead-players/33350-dead-player-recovery-guide.html)

sir can you help me,, i have ipod 1gb cannot power on, but can charge..

Re: DEAD PLAYER RECOVERY GUIDE

hi
i did the process as mentioned here and i successfully did evrything upto the final recovery process.
now my computer can read my player,i can put songs/data in it evrything ok.

but i cannot see the screen.
the screen is blank

please help?

Quote:

Originally Posted by sharma2862";p=&quot (Post 53891)

Bad display driver, aka wrong firmware. Keep trying...

Re: DEAD PLAYER RECOVERY GUIDE

This fixed me right up. However my mp4 player is basically only a flash drive. I get no display from the 1.8 inch LCD and it shows no signs of life at all, but when plugged into USB port and turned on, it is a 2GB flash drive.

Quote:

Originally Posted by MP4killer";p=&quot (Post 32735)

I too had the dreaded adfuupdate.inf error- "this file does not contain information about your device/hardware" with Win XP. I haven't seen this fix on this forum and I saw this on the S1mp3.org forum, and it worked for me- I opened up the adfuupdate.inf file in notepad and cut and pasted in these extra strings where KaiT said to put them (his english is a little off but his/her coding ROCKS! I have no idea how he/she figured this out):

Quote:

kai-t Joined: 26 Jan 2007 Posts: 6
PostPosted: Thu Jun 14, 2007 5:45 am Post subject: ADFU ADFUUpdate.inf Reply with quote
Hi,

as i tried to recover my MP4 Player after i flashed a wrong firmware, i can't get hin to be detectet as ADFU Device. Even going through the dead recovery guides.
after trying a hole day i recognized that the Problem isn't that the player is not in ADFU mode. The Problem is that the Player has a other Hardwarename.
So you can edit ADFUUpdate.inf to match your Player.

For mine Player, a ATJ2091N with Board: B828 V6 i had to add 2 lines.
One at the beginning after [Upgrade] i added
%USB\VID_10D6&PID_ff66.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_ff66

And one at the End of the file, in the [Strings] section:
USB\VID_10D6&PID_ff66.DeviceDesc="USB 2.0 (HS) ADFU Device"

After that the Player gets recognized when installing the Driver.

i cant get my player display in explorer...what to do...keep trying the guide process???.... i have the ADFU detected and all but not shows in explorer

Hi, Everyone,
I need help,
I just made my Ipod Nano 3rd Gen Copy a DEAD PLAYER,

this is the firmware
QSB13_44T
2007-12-16
9.1.52
2005-01-09

this is the plate number:
SAMSUN 846,
K9G8G08U0B,
PCB0,

my plan is to backup firmware from my other ALIVE Player,
and restore it to DEAD player.

i tried to use S1FW, no luck.

anyone please help

thanks..

i tried this fw
no luck

Chip AK1025 Board G 18A MAIN v0.3 Screen LDF TT-1807_1211_IPODM.fw

ah, ok im doing s1clone,

is the mp4 suppose to have blank screen while cloning firmware?

Re: DEAD PLAYER RECOVERY GUIDE

Hi Guys
i have an 8Gb Nano 3g which is stuck on the hour glass but cant seem to find the correct firmware for it details i have are below

regards

hynix
hy27uu08ag5m
tpc8
751amtuj7019mq

screen XY-1.8TBN-KMA

Re: DEAD PLAYER RECOVERY GUIDE

hello guys,

i have a similar problem. i have a 3rd generation ipod nano clone (that looks like this one http://cgi.ebay.com/ws/eBayISAPI.dll...ayphotohosting)

it has 2 gig memory and a 1.8 inch screen. on the back cover is a name iWAVE. i cant seem to find a board id but it only has 1 screw on the back (lower back) covered by a small sticker. when opened, i see a chip marked AK1025.

previously, when you turn it on the screen would hang at the hour glass and it would not be recognized by the computer when connected. i attempted the "recover dead mp3 player" guide and used a AK1025 firmware i downloaded from this site. the player reads on the computer now as a flash drive but i cant get the screen to turn on. i can create the usual folders but cant get the screen to light up. its completely black.

anyone know how to resolve this?

hhi
ihave sony mp4
i need frimware :
AK1025
8ED20AB0F5