Re: DEAD PLAYER RECOVERY GUIDE
 

Please, I need the firmware to my MP4 device. clone ipod 8gb with real 1 gb
Chip ATJ2092I and Hinix HY27UF081G2A board DX510310-V2
I used some I found here, but I have not succeeded,
.
Please help me

Re: DEAD PLAYER RECOVERY GUIDE
 

ok, here is the deal, i make it all until the adfuUpdate, windows shows me up an error "the folder you specified doesn't contain a compatible software driver fpr ypur device. If the folder contains a drever, make sure it is designed to work with windows for x64 based systems", what can I do?

Re: DEAD PLAYER RECOVERY GUIDE
 

My Ipod Nano Clone 1.8 inch screen & 2GB memory does not even turn on. What can I do please? Thanks. The computer detect 2 drivers when i swich my player. Which driver i can take Actions USB 2.0 (HS) WinUSB Device or S1MP3 ADFU Device?

http://lh5.ggpht.com/_Ms-Apy47Sh4/Sf...0/IMG_1057.JPG

http://lh6.ggpht.com/_Ms-Apy47Sh4/Sf...0/IMG_1058.JPG

http://lh6.ggpht.com/_Ms-Apy47Sh4/Sf...0/IMG_1054.JPG

http://lh3.ggpht.com/_Ms-Apy47Sh4/Sf...0/IMG_1056.JPG

Please help me!

Re: DEAD PLAYER RECOVERY GUIDE
 

In my opinion You should choose Actions USB 2.0 (HS)

Re: DEAD PLAYER RECOVERY GUIDE
 

And whit Actions USB 2.0 (HS) the Player don't work, not turn on!

Re: DEAD PLAYER RECOVERY GUIDE
 

That's because You must to find suitable firmware and with MP3 player upgrade tool to upload it.

Re: DEAD PLAYER RECOVERY GUIDE
 

Tnahks Nerijus !
Would you tell me which firmware and with MP3 player upgrade tool to upload for this model ????

Re: DEAD PLAYER RECOVERY GUIDE
 

yos dude I need pay you a beer :D

Re: DEAD PLAYER RECOVERY GUIDE
 

Hello! I have this JOY 888 (copy of newman K8player Anykaa AK3221mb, 2 GB, 2MP camera chip ,wich is dead...
BOARD: KGMP888-GAME-AK-V3(covered by the SD card slot)


When i try to start it it shows "Loading...." and that way it stays untill i press reset. No USB conectivity!

When i enter bios by pressing and holding power button for 10 sec, it enters a blue screen writing :"BIOS KG888-5.3.2-LinDa-F Please Press Reset!".

Pressing any button on the device in the BIOS state makes "Please press reset" text blink, after 4 buttons pressed(random) it doesn't blink any more.Could it be a button combination for the device to enter firmware upgrade state?Does anybody know how to rewrite firmware on thes device? It has no USB conectivity at all and the bios menu does not promt me for formating or anything else. !Please Help , Thanks!

Re: DEAD PLAYER RECOVERY GUIDE
 

http://farm4.static.flickr.com/3632/...0671617f62.jpg

http://farm4.static.flickr.com/3652/...5bbf01e8dc.jpg