MyMPx.org - DEAD PLAYER RECOVERY GUIDE

Page 106 of 111

« First

106

Show 40 post(s) from this thread on one page

MyMPx.org (http://mympx.org/forum/)

- Dead Players (http://mympx.org/forum/dead-players/)

- - DEAD PLAYER RECOVERY GUIDE (http://mympx.org/forum/dead-players/33350-dead-player-recovery-guide.html)

ashounet

27th May 2009 12:01 am

Hi every body.
I don't find my firmware, i have a clone ipod nano 3rd generation
CPU: AK1025
and the second constituant is:
hynyx hy27uu08ag5a
If someone can help me it's wonderful thanks for advanced

Florin

27th May 2009 9:54 am

Quote:

Originally Posted by tom99";p=&quot (Post 35002)

Very nicely written guide.. but I'm still having a problem:

I have this device (1.8 inch; 1GB; AMV; MP3; WMA; FM radio; Ebook; 65k colors...) Here's a picture: http://www.cdrking.com/local/product...410849-2488327
The device connects and gets recognised in windows as an ADFU device, so I'm having it in "recovery state" when connected to the PC.

I have a MP4 player just like this one, only it's 2GB
On it's processor is written: ACU7513 and 02144CA?C3C
On the memory: SAMSUNG713 and K9LAG0?U0M and PLB0
( The "?" are the letters where i cannot read what letter or number is there. )
I would be very great full if someone can point me out to a framework that could work on my MP4 player.
Thank you in advance!

EDIT: The last version that worked on it was 9.0.50 or 9.1.50... can't really remember

klon	29th May 2009 4:43 am

Player: Novex NFP-2003
Payment: B896V2
The processor: AK1025
Memory: Samsung K9LAG08
The display: KLM 167E01-1A

Need FW

mukeshhrs

11th Jun 2009 1:35 am

i have zebronics mp4 player 1gb. it's version no is 9.1.52 and firmware no is "080926 MUPIC B635_N4xb_V3.0_97N". after repeating 4 times the process for firmware upgrading this is not working yeat. althouth every step completed sucessfully and as accepted but still player gets dead again and again.pl help me.

mohsyn

15th Jun 2009 3:48 am

Sunplus - stuck at startup screen

I have an PMP iphone look alike (1GB)
Sunplus 3052A-HL171

After power on I get a screensaver like image (Bamboo leaf) and nothing else happens.

This image appears even when power is switched off and I connect it to laptop's USB.

shorting the chip only restarts and it gets stuck at the startup image.

It is not getting recognized on laptop or any computer for that matter. (Installed ADUpdate.inf)

Please suggest on how to ahead from here.

andikasuhendar

15th Jun 2009 7:20 pm

i followed the guide, i have an AJ250_v14 pmp player
the power led was ON, but it won't go to boot, before i tried guide the screen always goes for loading all the time, after i try it the screen just dead won't display anything only the led power was ON,please help me

djklauss

18th Jun 2009 5:05 am

Hello!
I need a firmware for an mp3/mp4 player Majestic 1 GB IC 11/1G

XA FPC888083A-V0.0

Control: ak1025 7j054ab 0k1
Plate No.: 91c066 07/07/23
Screen No.: DFM-0838-NL-WD.GLAFJ01

0746 29f8g08maa

Latest version on device was 9.1.52.

Device firmware information
Device name: S1 MP3 PLAYER
Productor: Wilson Co. Ltd.
Version: 9.1.52

Thank you in advance!

umeshgarg

30th Jun 2009 11:55 am

How detect mini mp3 player

1 Attachment(s)

my mini mp3 player working fine but sudenly power down .Now not detected by pc only show driver name and not show memory in pc and light is not showing when power on .Plz help how detect and update firmware

Rakib

11th Jul 2009 11:19 pm

Problem Not Solv

Mr Admin What You Say I do..But My Ipod Light Go Out ..Now What I Do..

My Email ..Rakib.1111@yahoo.com

Please Help Me..

Binh@MyMPx

11th Jul 2009 11:50 pm

Quote:

Originally Posted by Rakib (Post 282043)

Mr Admin What You Say I do..But My Ipod Light Go Out ..Now What I Do..

My Email ..Rakib.1111@yahoo.com

Please Help Me..

Please create a new thread for your problem. You will need to open up your player and post information such as board and plate ID.

All times are GMT -7. The time now is 5:52 pm.

Page 106 of 111