DEAD PLAYER RECOVERY GUIDE

[djklauss]

I need a firmware for an mp3/mp4 player Majestic 1 GB IC 11/1G

XA FPC888083A-V0.0

Control: ak1025 7j054ab 0k1
Plate No.: 91c066 07/07/23
Screen No.: DFM-0838-NL-WD.GLAFJ01

0746 29f8g08maa

Latest version on device was 9.1.52.

Device firmware information
Device name: S1 MP3 PLAYER
Productor: Wilson Co. Ltd.
Version: 9.1.52

Thank you in advance!

[Nardolino]

Hi all,
I have a death mp3 player too. noname branch just called MP4 Digital Player

HYNIX KOR
HY27UT088G2m
TPCB 735AA

ATJ2092N
processor

I do not know if I unpluged it wrong or how it crashed. The PC is not detecting the player anymore. I come so far that I can see the sandclock again on the 1.8 inch display but nothing else. In Vista and XP it is detected as unrecogniced USB device, if i try to install the driver i get a blue screen and system reboots.

Please tell me how i can fix this mp3 player and maybe update the firmware, format the memory. There should be a way of repairing it, for me it seems like an software issue.

Tank you to everyone how is able to assist me.

[milan63]

I need firmware for: Xwave s-42 1gb (PIC)

AK1025
7L039AB 2LJ

hynix KOR
HY27UTO88GM
TPCB 814H

board:
MP-1052Q-TSLSR(KEY) V2.1
070713 LIANG

When it first broke down, screen showed only hourglass, and xp couldn't detect it. Yesterday I gave it the last try, and managed to install some random usb driver for it. Tried some firmwares but now I only get white screen instead of hourglass...

[shimmy]

i neeeeeeeed dha firmware in my sig plzz

[leoncarter]

Hi, I am faced Problem with My JXD921 PMP. I recently Purchased. I Burned Direct Aimg , Bimg and firmware. to my device. Once Succefull installed I reset and restarted. I can Figure only Green Light on the player not LCD Light or Glow only total Blank screen. I think the Firmware install it not right.
So I tried Using again FRM but FRM unable to detect any device. whearas as soon i connect on System my computer shows 2 removable drives one 1 GB (internal Flash memory) an other 2 GB my SD flash Kingston card.
I have a secure backup of my Orignal firmware. But unable to put it back. drivers of my PMP is SPCA5000 all things are prefect but I would like to know the way to boot my Device and detect it to FRM there after i can re burn my old Firmware which works. So please help me.
On internet I have heard if such problem occurs due to wrong firmware either we need to open and short circut an IC pin. or We need to please combination of Secret Button to detect the device to System than open FRM and load the Firmware.
PLease Help me.
I have down below provide a document of my dignose what helpd and how with screenshots.
RapidShare: 1-CLICK Web hosting - Easy Filehosting

[leahov]

Hello!
After an unsuccessful firmware player ceased to run, the computer does not recognize it, that's data that is on the board and chips:
Lisong MP3 Player

HYNIX KOR
HY27UT088G2M TPCB 739A
ACU7503
g2079ca c20
SP3767AHN SPT 07CS31
JBE11 V10 2007/07/03

Need more likely a complete firmware (if you can tell how to do, because it probyval sew as ADFU device, but MP3 Player Firmware Update not responding)

P.S. Sorry for my English

[karpa]

hey,
i send some pictures to my mp4 player and the next moment i finished the sending it started to flash,i turned off and waited for 5 min but nothing, now it looks like dead
the player is compacto mp4 digital player on the batterie has a number: FS6003/2GB060809121

[mentoos]

Hi
I have a Marshal player. Model ME-F08. Heres its pic n details: Marshal ME-F08

My player plays musix. But my problem is with its LCD Screen! The LCD doesnt start most of the time. I mean the player turns on n works, but display shows nothing! And sometimes I turn the player on, display works for a while and after a few seconds (or a few minutes) display goes off

anyone can help me?
what should i do?

[Irukaida]

Hello, fellas, so here's my deal:
Player Specs: I have an ipod nano clone:


Large Chip: hynix KOR HY27UU08AG5A TPCB 902H
Mid Chip: AK1025 81003AB 21B
Little Chip: Colment CL6010 M1 2008

Issue:
Okidoki,so I'm gonna tell you delay by delay ¬¬, so that you can help me better:
With this guide I get to the part where is needed to get the ADFU device thingy, so I tweezer-it, get there and choose the "don't search option" and click next, but when clicking next I'm not getting the "show all devices" part; it takes me right to the "select driver" one, then at that part the option it delivers me is "USB 2.0 (HS) ADFU Device", click on Have Disk, search for ADFUUPDATE.INF, but mine is "AdfuUd.sys" and it is in system32/drivers (don't know if that affects in some way), later the USB 2.0 (HS) ADFU Device is installed, but here's my problem: I can't enter it on My Computer nor using RDiskUpdate from MP3Utilities, can't enter it from anywhere and the properties tell me that it's working fine, hence I don't know what to do next.

Question:
Any advice, mate? Can't get past there, I'm totally stuck.

[damm.admin]

Hello i need help. i did what is said in recovery guide. when i short the pins and select afudupdate.inf it installs as Actions USB 2.0(HS)WinUSB Device, not AFUD DEVICE. any helpp plzz??