MyMPx.org - DEAD PLAYER RECOVERY GUIDE

MyMPx.org (http://mympx.org/forum/)

- Dead Players (http://mympx.org/forum/dead-players/)

- - DEAD PLAYER RECOVERY GUIDE (http://mympx.org/forum/dead-players/33350-dead-player-recovery-guide.html)

Quote:

Originally Posted by bossmihai (Post 280958)

Hello! I have this JOY 888 (copy of newman K8player Anykaa AK3221mb, 2 GB, 2MP camera chip ,wich is dead...
BOARD: KGMP888-GAME-AK-V3(covered by the SD card slot)

When i try to start it it shows "Loading...." and that way it stays untill i press reset. No USB conectivity!

When i enter bios by pressing and holding power button for 10 sec, it enters a blue screen writing :"BIOS KG888-5.3.2-LinDa-F Please Press Reset!".

Pressing any button on the device in the BIOS state makes "Please press reset" text blink, after 4 buttons pressed(random) it doesn't blink any more.Could it be a button combination for the device to enter firmware upgrade state?Does anybody know how to rewrite firmware on thes device? It has no USB conectivity at all and the bios menu does not promt me for formating or anything else. !Please Help , Thanks!

i need firmware for
BOARD: KGMP888-GAME-AK-V3.2, 2007-08-03
1st bootloader : Anyka__AK3221MB22405__FA0487
2nd bootloader : Samsung 719 K9G8G08U0M_PCBO
the devices show "Loading..." on start. When i connect it to PC and press some combination (menu+ power+ play + usb connection), the PC detect 3 partitions (13,9MB - 1,93MB - 991MB) after doing low-level partition. Please help me to solve this problem. thx

Sorry for my bad english

PROSSESSOR: ak1025 2H034AB 0J1
MEMORY : hynix HY27UU08AG5A TPCB 852A
board: K0129H2V2M
please firmware and program. I cant find it

Please,i need Help!i have

APACER AU822 512 MB version 3.5.7 (wilson coldt corporation),i need the same firmaware,probably original because i found one fake... :(

my Apacer has No USB conectivity,so i done first steps from PAGE 1,BUT i stuck on AdfuUd.SYS file....

I DONT NO HOW TO MAKE AdfuUpdate.inf (if some coud make inf. file for me, :) )

ALL INFORMATION I CAN GIVE ARE:

on the apacer plastic:W-KLM123A01.B060419.S2

device name=S1 MP3PLAYER
productor=wilson Co ltd
MEMORY CHIP:
SAMSUNG 622 K9F4G08UOM

CHIP:ATJ2085H

Vendor id :10D6
Product id :FF51

if anyone can solve how to make my computer recognize apacer,i will be 90 % happy,because i have found life-dead firmware which can give some signs of life

help :(

Hi Zoran2011
I don't know your exact problem... looks as if the your player's info is not in the AdfuUpdate.inf file. If that is the case than you will have to edit this inf file in Notepad. The following thread will help you through:

Change AdfuUpdate.inf

Take Care

[Version]
Signature="$CHICAGO$"
Class=USB
;ClassGUID=1181f4a0-f284-11d2-9068-00609797ea5a}
provider=%MSFT%
DriverVer=08/18/2005,3.0.0.0
LayoutFile=layout.inf

[Manufacturer]
%MfgName%=Upgrade

[Upgrade]
%USB\VID_10D6&PID_8888.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_8888
%USB\VID_10D6&PID_ff51.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_ff51
%USB\VID_10D6&PID_ff61.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_ff61

;[PreCopySection]
;HKR,,NoSetupUI,,1

[DestinationDirs]
umss.files = 10,System32\Drivers

[MDisk.install]
CopyFiles=umss.files
AddReg=umss.addreg

[MDisk.install.NT]
CopyFiles=umss.files
AddReg=umss.addreg

[MDisk.install.NT.Services]
Addservice = AdfuUd, 0x00000002, AdfuUd_AddService

[AdfuUd_AddService]
DisplayName = %USB\VID_10D6&PID_1160.DeviceDesc%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %10%\System32\Drivers\AdfuUd.sys
LoadOrderGroup = Base

[umss.addreg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,AdfuUd.SYS

[umss.files]
AdfuUd.sys

[SourceDisksNames]
1000 = "USB Mass Storage Device",,,

[SourceDisksFiles]
AdfuUd.SYS = 1000

;---------------------------------------------------------------;

[Strings]
MSFT="MP3 Player"
MfgName="MP3 Player"
USB\VID_10D6&PID_8888.DeviceDesc="USB ADFU Device"
USB\VID_10D6&PID_ff51.DeviceDesc="USB 2.0 (FS) ADFU Device"
USB\VID_10D6&PID_ff61.DeviceDesc="USB 2.0 (HS) ADFU Device"

what i must change on this up informations,what is classguid?where can i find it?please bold what i must change,because there is still no usb conectivity,no access to disk of apacer

device instant id:USB\VID_10D6&PID_FF51\5&734D4C1&0&2
APACER AU822
VERSION 3.5.37
on the apacer plastic:W-KLM123A01.B060419.S2

device name=S1 MP3PLAYER
productor=wilson Co ltd
MEMORY CHIP:
SAMSUNG 622 K9F4G08UOM

CHIP:ATJ2085H

Vendor id :10D6
Product id :FF51

can you please make for me inf.,and send me to my email dilberyboy@hushmail.com if you are profesionall :)

zoran2011
your players info is in that inf file so it should load the drivers for you. Just put your player in that adfu mode and go. if you have other problems you may place it here and we will help you out.

but my apacer is still no recognize,without info about my player i cant do upgrade some firmware...i dont see my disk space in apacer...computer cant recognize my device because i gave my apacer wrong info,you can see that is written in inf ------------Source DisksNames]
1000 = "USB Mass Storage Device",,,-----,BUT I HAVE ONLY 512 MB STORAGE hehehehe,and im not sure for other components in that inf file..so i asked you to help me create inf file for my apacer 512 mb,if you know

Zoran2011
Check your email and try the files
TC
Mabboseg

I Updated MY mp4 player with wrong firmware and now it is not starting what to do?..now the player is even unable to connect my pc so do any one know what to do? and how do i connect to my pc ?plz help my email address is edwinz_flamehaste@yahoo.com

but there's nothing 2 chips inside my china sony mp4... T_T