Re: DEAD PLAYER RECOVERY GUIDE
Quote:
I HAVE: MP3 PLAYER JTH802_F 2006/04/13 ACT_V3.5.35 I THINK I USED: SigmaTel Firmware uploader AND pressed download. PLS REPLY TO THIS TREATH |
Hi all!!
i have a same problem like cstamas8 with a same player.please help us!! for cstamas8:én nem szedtem szét a gépet, nekem is 512esem van de így is felismeri az usd device-ot csak nem engedi az adfu drivert hozzárendelni:'( |
Hi, I have the problem installing the firmware. Mp3 player utilities writes me about unknoun flash error while upgareding. Mp3 player detected as a flash drive. Is it neccesary for it to be detected as an ADFu device and what is it? :) What should i do? Plz help. Thanks
|
Re: DEAD PLAYER RECOVERY GUIDE
hi this is kaustubh..i had flashed ma chinese mp4 like a jackass(dint work)...and re flased it wit ma back up dump.bin....now when i start my player i only see a blue screen wit a hourglass...i tried ur recovery of mp4 player....it started out well...but when i went to install the driver as u said to browse and open "AdfuUpdate.inf"in the windows folder i got the following msg"the specified location dose not contain information about your hardware".
now i dnt knw wat to do...if u can plz help me. i have a s1mp4 player....from wilson comp. and i think my original dump.bin file was corrupt....any help/advice u could give??? |
Re: DEAD PLAYER RECOVERY GUIDE
I have a Ipod nano clone 2 gig. which had the sand watch hour glass problem. Then i followed the recovery guide opened it up, press on the pins with paper clip, then it detected ADFU device. then i was able to use the MP3 upgrade tool and updated the full firmware which i downloaded
chip set is SAMSUNG 710 K9LAG08UOM and the chip set is ATJ2093H Then the guide told me to format it, Windows explorer cannot detect it, and i have no idea how to format it. What should i do next. The mp4 player started to show some life, no more watch glass anymore. |
Re: DEAD PLAYER RECOVERY GUIDE
i lol'd
|
Re: DEAD PLAYER RECOVERY GUIDE
Hello, Ive got an chinese MP3/MP4 player. Sold as 8GB, actualy only 1GB. After it got off working I tried to upload a firmware. When I upload a full FW the display is still lighting on white and nothing happens. But after that Win Xp recognise it as an USB drive. Is it enough for success and can I continue with formating and uploading a firmware? Or what functionality has the player to have after uploading full FW? Thanks.
|
The hour glass just wont disappear after waiting more than 30 sec ...
|
Re: DEAD PLAYER RECOVERY GUIDE
i have a chineses mp4 player with a sunplus chipset : SPMP3050A and samsung k9g8g08u0m 1gbyte flash and i found on its board this id pmp-703-v11.00 . its like this one but with 1 gb :
http://www.mympxplayer.org/album_sho...php?pic_id=278 he was blocked when i tried to unplug it from usb. and as i followed the recovery guide i was just able to let windows detect it as an uinknown device. xp doesnt want to install the adfu driver so i cant do anything now , can sombody help please ?? can i restore it ?? or its just good for the garabge can ?? |
please i need help with my mp4!!! i guess one of you can help me with my mp4 is a nano clon last generation and its dead, the computer don't reconized it....please i need help!!!
|
Awesome guide, i just screwed up my player by loading a foriegn firmware and fixed it in an instant.. its not a long process if you do it a few times.. its pretty fast...
Now, to try out the other 3.5.37 fw's until i find the one that matches mine! My original fw has 0 volume on amvs |
yeah i wasnt able to load the "AdfuUpdate" file or whatever its called but i just clicked on the usb device on installed hardware on that same screen instead of have disk or whatever and then i loaded my old firmware.
So basically i skipped that step.. i had to follow the red directions, but basically i ended up skipping them i think. |
yeah i ruined mine.. to blue screen so i couldnt do anything.. then i fixed it.. back downloading mp3s today
|
http://img213.imageshack.us/img213/1420/126gw1.jpg
On this step.. instead of clicking have disk(since i was unable to load up the AdfuUpdate), which is on the right, i just selected my device in the window and pressed next button or whatever .Just play around with that step til you get it. Also, in the device manager, i had the wrong thingy selected, so go back there and make sure you have the right thing selected for your player. I have multiple usb devices connected to mine so i had to keep scanning for hardware to see which one updated then i knew which one was the mp3/4 player |
i have to do it for my sisters player too.. which is harder.. the player wont come completely apart because the speaker in back is attached to the front via wires. It plays out loud as well as into a headphone jack
|
Re: DEAD PLAYER RECOVERY GUIDE
I too had the dreaded adfuupdate.inf error- "this file does not contain information about your device/hardware" with Win XP. I haven't seen this fix on this forum and I saw this on the S1mp3.org forum, and it worked for me- I opened up the adfuupdate.inf file in notepad and cut and pasted in these extra strings where KaiT said to put them (his english is a little off but his/her coding ROCKS! I have no idea how he/she figured this out):
Quote:
|
My mp4 it ignites but the program does not start.
I have an equal Mp4 to which it is described in this forum. Mp4 it ignites but the program is not restarted and the computer does not recognize it. Someone can help me. Thank you. |
Re: DEAD PLAYER RECOVERY GUIDE
How did u know the code for your player ?? can u help with mine ?? my player info can be found in page 47
thx |
Re: DEAD PLAYER RECOVERY GUIDE
well i got as far as getting it to recognizing the player as a usb device and installing the driver but when i try and use one of the firmware's it just hangs on "Downloading the restorable main program" also i used that clone program to make a back up is that what i should use next? to get my player back into working order or do i have to do something else to that.
|
red_pen , s1clone requires you to have a working player, so that it could dump the firmware from it and flash it into the non-working player.
For a dead player recovery, and you are just trying random firmwares. You'll need MP3 Utilities Upgrade Tool, there are many versions of MP3 Utilities that you can download from the downloads section. If you encounter hanging when you try to flash in some firmwares, try uninstall the MP3 Utilities, and re-install another version. |
Re: DEAD PLAYER RECOVERY GUIDE
i used the clone program before i crash my player but i'm guess i left songs on there and it also put that in the file cause the dump.bin is almost a GIG in size. also now i can't get to my player through explore, it's getting detected though and stuff but it doesn't show the drive under my computer, any thoughts?
|
Re: DEAD PLAYER RECOVERY GUIDE
Hello everyone. Sory for my bad english , but I want somebady help me. I have mp4 player BLACK PEARL , this is the pictures of player
http://skruji.hit.bg/ALIM0002.JPG http://skruji.hit.bg/ALIM0003.JPG http://skruji.hit.bg/ALIM0004.JPG I kill my player and I can't fix this problem. I read this theme and dry to recover it. dry many versions of software , but they don't work in my model. :( :?: :? P.P. The version of firmware is 9.0.49 and I can't find this version anyware. If anybody have this firmware send it to skruji@gmail.com 10x |
Re: DEAD PLAYER RECOVERY GUIDE
I am looking for a working firmware for:
Bought on eBay listed as 8GB but when using the checker suggested in Recovery Guide shows as 1GB however the Hynix chip checks out as an 8GB chip, so am wondering how that was accomplished. I am fine with 1GB but would just like to get it to work. In the present firmware 9.0.50 it hangs on hourglass (Startup). It came on a couple of times for me to back up the data but after using S1FX to backup firmware, it will not boot up at all, just hangs on hourglass. Every 9.0.50 firmware on this site has failed so far. I know there are others out there with this device as the eBay seller sold over 30000 of these. Please help! |
lynnymoore , the Hynix HY27UU088G5M is a 8Gigabit (1GigaByte) chip, as 8bits = 1Byte.
At this moment, the S1fwx tool only supports upto v9.0.43, so your version could not be extracted. Likewise for the other users with the same version as yours. So you would find problems locating a suitable firmware. If those in the downloads section do not work, i'll suggest you contact your seller for an exchange or full refund. |
Re: DEAD PLAYER RECOVERY GUIDE
Just curious, does anyone know how come my Hynix QQ1GM HY27UU088G5M (8Gb) chip only formats to 1Gb? I followed the testing procedures exactly and they definitely show it to be 1Gb MP4 Player.
|
Re: DEAD PLAYER RECOVERY GUIDE
after a month of searching for a suitable firmware for my dead i-nickel, and many more months of waiting for one, i can give only one advice:
stay away from these s1 players. the producer is clearly not interested in a solution, just in selling shitloads of these things i have a meizu m6 now and that thing works and has decent support from the supplier no offence to the owner of this board ofcourse! |
Hi everybody, I think that it is a great guide, I don't need open my mp4, my PC detect the device, and install with USB 2.0 (FS) ADFU device, but later it's not appear on my explorer, and I can't upgrade with MP· Upgrade Tool,
What can I do??? Please sorry if my english is so bad, I from Cuba Ok Thanks |
Re: DEAD PLAYER RECOVERY GUIDE
Hi everybody,
please can somebody helps me with my problem? My 2 players were dead so I have followed the recovery guide to the letter and everything goes well until the time comes to load the firmware. It is at this point that the upload gets stuck at around 30-40%. Exactly like this: http://www.mympxplayer.org/image-full-asp187.html It stopped always at five blue squares. I tried it many times, but always the load progress stopping at the same position for both players. Also I tried to use 3 different types of upgrading tools, version: 3.68, 4.05, 4.13, but still the same problem. Please help me. Thank you. |
Re: DEAD PLAYER RECOVERY GUIDE
hi all...
i have a trouble i have update firmware 3.37 v21b my firmware is 3.37 before update my ipod screen is always blue... and now the ipod can't be detected by PC WHY??? PLEASE HELP ME QUICKLY i've been frustated must i try short the IC? is there other way without short it??? thanks all |
--------------------------------------------------------------------------------
I have a mp4 player (1.5" , 4 GB) and I only had it a few days when the computer couldn't recognize it anymore. I can still play the songs but my computer don't recognise it. I've opened it and tried to fix it (like discribed in topic "dead mp3 player" but still it isn't recognised. My firmware is 9.0.50 I had to work hard for this player and I really want it to work again |
me too i get that error same as wexku..
my mp4 specs are Processor:ATJ2085W F40486AB C48 Memory:Hynix KOR HY27UG084G2M TPCB 613A Board:MP-693C-SL v1.3 2005-12.14 please help me |
Re: DEAD PLAYER RECOVERY GUIDE
Please HELP ME !!!!! :cry:
when I try to install the driver visualizes this message: "Il software che si sta installando per l'hardware USB 2.0(HS) ADFU Device non ha superato il testing del programma Windows Logo che consente di verificarne la compatibilitŕ con window XP L'hardware non verrŕ installato. Contattare l'amministratore di sistema." :cry: |
Re: DEAD PLAYER RECOVERY GUIDE
I cannot locate the adfuupdate.inf file on my computer. any chance that I can find it some where else
|
you can download it with the help of google,,or in your mp3 utilities..
|
rkylrdog , try the ADFU system files here http://www.mympxplayer.org/driver-ad...les-df364.html
|
hey latter pls help me with my mp4 player
|
Re: DEAD PLAYER RECOVERY GUIDE
Good news with regard to the installation of the driver:
in the section siatema ---> hardware ---> Company driver ---> it does not block…. |
Re: DEAD PLAYER RECOVERY GUIDE
Ok I found the file that I needed and when I went through the steps that was layed out for the dead player recovery I got all the way until you use the mp3 player upgrade tool. When I tried it to recover the firmware it just locks down. I downloaded the firmware that was suggested at the end of the steps for recovery I used the upgrade tool and located the firmware on the computer and when I press the button on the tool program to start the recovery it starts but then just sits there and does nothing. Any Ideas. Thanks Ron
|
Very nicely written guide.. but I'm still having a problem:
I have this device (1.8 inch; 1GB; AMV; MP3; WMA; FM radio; Ebook; 65k colors...) Here's a picture: http://www.cdrking.com/local/product...410849-2488327 The device connects and gets recognised in windows as an ADFU device, so I'm having it in "recovery state" when connected to the PC. I tried MP3 Player Firmware Upgrade Tool (4.05) & MP3 Player Product Tools 4.19 to no avail with the Full Firmwares. "Downloading the restorable main program" is what it's supposedly doing.. but I find it hanging there. If anyone has any suggestions.. I'm getting very frustrated.. so it would be greatly appreciated! Thanks either way. |
rkylrdog & tom99 , try uninstall and install another version of MP3 Utilities, as some versions tend to hang while flashing.
|
| All times are GMT -7. The time now is 5:52 pm. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.0 RC 2