Re: DEAD PLAYER RECOVERY GUIDE
 

My player seems to be dead, ive got it to the recovery stage but all the firmwares i have tried it says that they are the wrong ones, this is my mp4 player http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=130148354748 pls can somebody help me?

Re: DEAD PLAYER RECOVERY GUIDE
 

hi is this method apply to any kind of mp4?

Does anyone have a firmware for a Blueberry CAT mp4 player?

Does anyone have a firmware for a Blueberry CAT mp4 player?

I Switch on my sony mp4 only to discover that nothing Came up on the screen no sound nothing..

What amazed me is that i just Played music on it not long and i have put it off like 2hrs ago.

Pls Help me.. What to do..

*I have tried the Above solution but It didnt Work!

Pls What do i do?

Re: DEAD PLAYER RECOVERY GUIDE
 

Hi

I have been trying to recover my dead player I have followed the How to until the very last step of the how to. At that point My player was not recognized. I then picked up the thread in Sept of 07 where lattesurf was helping reactos recover his player. I did each step Lattesurf suggested and it did get Windows to see the player but when I try to install the Ad????.inf file I get the following error.

Can not install Hardware

The required section was not found in the INF.


Any suggestions?

not a good idea to drag the flash's pins. it will kill the flash if still got electricity on PCB.

Re: DEAD PLAYER RECOVERY GUIDE
 

I found out how to fix the problem
I downloaded the Adfuupdates and a Adfuud from this site
hears the link
http://www.mympxplayer.org/driver-ad...les-df364.html
I used the adfu from this site instead on my own and It worked
now all I need is the right firmwire

hy i have a prbl i hav make everithing what u say! when i instal the adfu updater from windous it appear a error and say the software are you insaling bla bla ahas dot passed windows logo testing ????? what i have to do plsss helllp me

Thanks That did the trick

Re: DEAD PLAYER RECOVERY GUIDE
 

I have 4 identical chIpod shuffles which I purchased in China.

When a went to use the devices I kill two of them when I fully loaded the supposedly 4G player. It was then I figured out that I actually had 1G player. I followed the How to fix hacked chIpod instructions and fixed the remaining two machines to run as 1G player.


I then when about trying to recover the Dead chipods. Following the instructions and postings on this board, I have set the player into ADUF rescue mode. Now I need to load a full firmware version.

Going to http://www.exoticsa.com/2007/

I downloaded the 4.15 tool and used it to look at the firmware version on my working chipods: Bother were Wilson Co LTD version 9.1.51 firmware.

Then from the same site, I downloaded DIGIPOD SD-18N and uncompressed the firmware. At this time I added an .fw extension so that the MP3 utility can recognize the file.

When I open the file using the 4.15 MP3 utility the SD-18N.fw file is recognized as Wilson Co LTD version 9.1.51. When I hook my Player in ADUF mode in to the USB port the MP3 utility recognizes the player and said it is ready of upgrade. I tell it to upgrade the firmware and the utility
upgrades to player and indicates that the firmware installation was successful.

At this point the ADUF device disappears from the USB items listed under the Hardware Device Manager.

This is where my troubles start! I can not find the player anywhere on the PC. It is not recognized as a flash drive or a hard disk. It is nowhere to be found.

I then turn off the player and remove it from the USB port. I wait a couple of minutes and then reboot the player and wait a few more minutes so that it has had more than enough time to boot.

When I plug the play back into my computers USB port. Win XP Pro makes a sound like it just noticed a new USB device, but I can not find the device anywhere in the Device Manager or Using Windows Explorer.

The MP3 utility or MP3 disk format programs do not recognize the player either.

I have read one post that said I may have to format the MP3 drive from windows, but I have no idea how to do that being I can not find the device on the system.


Please Help!

Re: DEAD PLAYER RECOVERY GUIDE
 

I OWE YOU A BEER AND BOTTLE OF SHAMPAIN :lol: :lol: :lol: :lol:

but there is still prop. i need to upgrade it to 002.521.180

can you help ????

Re: DEAD PLAYER RECOVERY GUIDE
 

Ok i followed the guide made by tadad1...
so i can boot the Mp4 storage..the problem is its only emitting a light with black screen when its turn on
or plugged in pc and thats weird cause..
Version Info:
SC85051A
2006/03/13
ACT_V3.5.35
not sure but i know its the same firmware and features of the Mp4
and the only thing that idont understand is FW and BIN...
when you put the full you must find the dump or bin of that player???
i already try many firmware but nothing happens...


Mp4 Name:Nasaki Nk757k
Theme: a lotus flower
http://img257.imageshack.us/img257/8...ture061ft1.jpg

Re: DEAD PLAYER RECOVERY GUIDE
 

ok its a screen issue cause i try to play it
and it did play...
The only problem is re solder....
Thanks for this site and all the people here...even though I'm ignored... :D

Re: DEAD PLAYER RECOVERY GUIDE
 

I can't got the adfuupdate.inf in WINDOWS folder .give me the methode to visualise ity or if you have it send t to me
thanks for your hard work

My Mp3 Player Firmware Upgrade Tool

so slow..

It is Downloading restorable main program..

How many hours does it take?

hi tadad1 i have "digital mp4 player" ( Model Number : SW-C205 ) ROCKCHIP 2606A. I have saved bad firmware and I have now death player (white screen and no sound) when I connect mp4 with pc it shows me disk whitch is normal used mp4 players(drive F) but when I wont to click on it then it shows me " insert disk" problem
is when I wont save new firmware then I must first change setting in mp4 "upgrade firmware" and connect USB cable. That´s why I cant instal new firmware ... PLS help me (PS: where can i find firmware for my mp4 player ) PLS help i have my mp4 one week .

Re: DEAD PLAYER RECOVERY GUIDE
 

To get your Rockchip player into "upgrade mode" all you do is this,

1) Switch the player OFF using the main on/off switch.

2) Hold down the "MENU" or the "PLAY" button and keep it held down.(try the other buttons if these dont work)

3) Connect the usb to the player.

4) Wait for about 10 seconds before releasing the menu key.

5) You are now in "RockUSB" upgrade mode!

6) Then just Start ConsumerUpdate and upload a working firmware and try it!

additional information can be found on Rockchip player recovery is here':-
http://www.mympxplayer.org/rockchip-...de-vt6686.html


You may like to try the firmware I used to recover my player with it's the same screen size as yours :-
http://www.mympxplayer.org/rockchip-...276-df612.html

I hope you can get your player back.

Re: DEAD PLAYER RECOVERY GUIDE
 

i have sony mp4 after downloading bin format file my player is dead now pls some one help me

helooo pls help me i have all u say and it works i have a blue screen now what i have to do i have upgrade a dump what i need fw or a dump???? i have a mp3-4 player ATJ2091H firmware:ACT2097_s72_1 9.0.43 29/04/2006 1,5screen 1gb !! i don't have the original firmware pls halp me what i have to do???

Re: DEAD PLAYER RECOVERY GUIDE
 

I am so upset about this player so far its for my sons B-day it 2 days is the only reason I am trying to fix it.
I went through the guide. I am stuck... It recognizes it as a USB device. However it will not load the ADFUupdate.... It just says that it has no information for my Hardware.
Please TADAD1 (or anyone else) help,,, i cant afford to buy him another one

jukeboxjunki , go to Control Panel, and click on System.

In it, select the Hardware tab, then click on Device Manager.

Now you should see a list of hardware items connected to your computer. Look for the player, it should be highlighted with a yellow exclamation mark.
Right click on it and select Properties.
A new box should open. Now select the Details tab and in the drop down box, chose Device Instance Id.

What does the box below it display after you selected it?

lattesurf
This is what it says there....

USB\VID_10D6&PID_FF66\5&193F920A&0&5

jukeboxjunki , try using the ADFU files here http://www.savefile.com/files/1205168

Select the player under the device manager, right click and chose update driver. Then use ADFUupdate.inf file that i've provided. See if it can now install the driver properly.

lattesurf... I really appreciate the help here. This ADFU doesnt work either but a little different. It almost works. Says there is no section for my device.

jukeboxjunki , perhaps try this new ADFU file here http://www.savefile.com/files/1207727

See if it installs properly now?

Re: DEAD PLAYER RECOVERY GUIDE
 

ANYKA US B 1.1 Nad Res Z USB Device :D
BIOS kG891 MLC V0.0.12B
Joy MP4 Player Download Frimware firmware bios
Radio , Movie , Camera 1.3M 1,3 Mpixels , 1.3Mega pixel
Games NES
Software : D B-Z-M 6.0.0L9
Hardware : DVT2.1
Audio : V0.5.29bch2
soft
Mb
AkResData.bin
kg891.bin
lang_font.bin

http://www.megafileupload.com/en/fil...layer-rar.html
http://files-upload.com/files/630324/softmp4player.rar

if your Portable Media Player have problem with software
here you can download this archive
press start button, and keep pressed, when is show
blue screen and " Insert usb cable ..." pleas insert your
usb connector cable, afther this press play button,
and you will see : press Menu if you want to low format or lowformat
...or other key .
pres left or right key ! DO NOT PRESS MENU !!!
now your computer will recognize the device us
ANYKA US B 1.1 Nad Res Z USB Device
and you will have in MY COMPUTER 3 new partition removeble
now create one new directory in your desktop from your computer,
where to make back-up your software from this new partition, (just in cases)
after you make this backup

Always BACKUP the existing firmware of your player before attempting to update
the firmware on your mp4 player. Updating your mp4 player with the wrong or
incorrect firmware will result in a DEAD PLAYER and it not booting up at all!
Always be sure that you use the correct firmware for your mp4 player only.
Updating your firmware will NOT provide you with any extra features.
It's really intended as a resource and 'backup' should the firmware on your mp4
player becomes corrupt.

copy this files after the description:
from the "partition 1" in the first of this partition
from the "partition 2" in the second partition
from the "partition 3" in the 3th partition.



http://www.megafileupload.com/en/fil...layer-rar.html
http://files-upload.com/files/630324/softmp4player.rar
http://www.mediafire.com/?6x1ix0efzmz
http://www.mediafire.com/?6x1ix0efzmz
http://www.4shared.com/file/29824165...mp4player.html



e-mail flobucuresti(at)yahoo.com

Re: DEAD PLAYER RECOVERY GUIDE
 

hi guys, i flash my mp4 player with wrong fw and now i cant turn it on :( i have backup file of my original fw named "dump.bin" but i cant write it back to my player and i think that file is corrupt :( :shock: so guys, i need help - someone have 9.1.50 firmware ? if you have, then PLEASE send it to me to the dj4stanys@gmail.com :wink: all information about my player(like ipod nano 2nd edition):

chip:

hynix
HY27UT084G2M
TPCB 723A
mbsJ0b83AA

board: K16v1K2

software(before bad fw upgrade):
MP3 PLAYER
TJD_130_02
2007-01-26
9..50
2005-01-09

Hang in there, i have a working 9.1.50 device, just let me get a s1clone dump from it.

plaese i have a deid thomson lyra em2600 can it be recovered like you hva said?

Re: DEAD PLAYER RECOVERY GUIDE
 

Hi, my MP4 player is finally showing a blue screen that says "USB Disk" and device manager shows it as "ANYKAUSB Nand Opn Zone USB Device". I'm trying to install the ADFU driver so i can install the firmware but WinXP won't let me. So I'm pretty much stuck. Can anyone help me resolve this so I can get my player up and running again? MP3 Tool can't find it. Thanks :roll:

hi there, i tried to change my fw , but now player is dead, i tried to fix it with this with guide in first page..
now i can see my player device (in my computer as removable disk)
but it`s still dead, what to do next ?
original fw is 9.1.51 , i haven`t software cd, so i downloaded it.
i haven`t bacup too
thans for help :)

cunfusled73, you should check this thread: http://mympxplayer.org/mp4-players-a...d--vt6847.html

Ankya players are a totally different breed from Actions ones, therefore they can't be recovered using this guide.

TUANAS, except of trying every 9.1.x firmware here, there's not much to try.

TUANAS , what you'll need to do is to try all the v9.xx firmwares here http://www.mympxplayer.org/actions-9...ware-dc37.html

As there is no way to tell which firmware would work with your player, you'll need to try all those for your screen size until you get a working one. Good luck.

Re: DEAD PLAYER RECOVERY GUIDE
 

After a good week of struggling, I found on a Polish website the RIGHT firmware to recover my ATJ 2091N -based Monochrome 2GB MP3 Player with FM radio. This firmware is NOT YET present in your Downloads, so you can add it if you find this useful (I don't know how to do it by myself)!

This is this one:
http://w14.easy-share.com/11391971.html

If you find a way to modify the HORRIBLE boot splash screen, please let me know Wink

Re: DEAD PLAYER RECOVERY GUIDE
 

Please help: I can get my player to appear as an ADFU device, but I'm a little confused on how to get the firmware I downloaded actually onto it. Any advice as to how I flash this ADFU device and get it to start registering as a normal USB drive would be greatly appreciated. Thanks!

Re: DEAD PLAYER RECOVERY GUIDE
 

Biostem,

copy the AkResData.bin & Magic.bin and right click and paste on which ever drive letter is assigned to your device. After its done copying the files, safely remove from usb and restart your player. It should now load your player. Hope this works for you. ( I just got done fixing mine)

Re: DEAD PLAYER RECOVERY GUIDE
 

The problem is, while it *does* show up as an ADFU device in my device manager, there is NO drive letter associated w/ it. Thanks.

Re: DEAD PLAYER RECOVERY GUIDE
 

if you click on "My Computer" there should be a drive letter "F:" and "G:". You want to copy the files to "F:".

Re: DEAD PLAYER RECOVERY GUIDE
 

The mp3/4 player does *not* show up in 'my computer' at all, yet it *does* show up in the device manager as an ADFU device. Thanks.