hy i tried the guide but my problem is that mypc recognise the mp3player as unknown device and i can't install the adfu driver for it:S Please help me:)

I have an OEM KG216 that I tried to put new firmware on (from the CD provided) but I think I bricked my player. It flashes on and off and is non-responsive to the buttons or the reset button. The player wont stay on long enough for my computer to recognize there is anything in the USB. Before I completely void any warranty by opening it up, will this process work for me? Thank you so much1

why did you flash it? if you have warranty, go to your store.

Is your battery full? try filling it!

OK, found the firmware. But I can't upgrade! I can't click the Upgrade Button in Upgrade tool! MP4 is recognised as an ADFU device, but I can't see it in explorer!

Re: DEAD PLAYER RECOVERY GUIDE
 

hi,
i am new here and excuse my bad english.
Please help me.
I have a chinese mp3 player 8Gb.
when i turn on it, the hourglass is always fixed, i can charge the battery with USB but my computer not recognize it. I tryed many usb cable with same result. What can I do for it ?


many many thanks

Re: DEAD PLAYER RECOVERY GUIDE
 

Hila Aúgnu no resucita hm mp4, alguien me puede ayudar.

los codigos que aparecen son:
AK1025 7G006BA

hynix KOR
HY27UTO88G2M
TPCB 725AA

B828 V6 TCH(EN PLACA)

prové con los que me parecen parecidos pero no pasa nada, no he podido hacer funcionar el aparato.

si alguien me puede ayudar se lo agradezco.

Re: DEAD PLAYER RECOVERY GUIDE
 

Hello everybody, my name is Paul and I am a murderer...I killed my mp4. Is a noname brand(nJoy PMP-181). I opened it and the only things i found are these:
HYNIX KOR
hy27uu08ag5m
TPCB 73A
MTUJ3268Q
I think this is the memory.
ACU7515
GA094EA 5AH
This is the Control...I am prety sure.
XLX1013V4-K2
2007/10/12

This I think it's the Plate Number.
But I can't find the screen number.
I have to mention that it's a mp4 with 1.8 inch screen, it's got some kind of touch butons...and it's got another button on the side witch powers it on, and blocks the buttons...
I would fall in love with the one that helps me bring my mp4 back to life.
:(

Re: DEAD PLAYER RECOVERY GUIDE
 

I've problems with my mp4 player:
memory HY27UH088G2M
chip ATJ2091N
non standard mini-usb

After turning on shows only clepsydra. windows see him as USB 2.0 (HS) ADFU Device but in explorer theres any removable discs.
When run MP3 Player Upgrade tool (ver 4.18 and 5.09) nothing happens, device firmware information is blank :(

what shall I do to fix this??


_____________________________________________

ok on MP3 P U T 3.68 i can run in recovery mode but....

Downloading the restorable main program

and freeze, progress bar stands still

My player is kind of dead
Nano clone act209x_s75 9.0.48 action chip (damn hard to open that thing..)
I accidentaly pulled cable while trying to upgrade f/w (just for themes using s1res (export), mostly it's unsucessful), and now all the time I got sandclock , nothing else, good that pc recognises it as unknown device (also Actions USB 2.0 (HS) Winusb device).. I pop- up mp3 upgrade tool RdiskUpdate, but it won't show device..
What to do now? D:

thanx

hallo i have an mp4 player that is dead now and need recovery my mp4 firmware is(was)

TJD_1322_20
9.1.52
2005-01-09
LISONG MP3 PLAYER
wilson.Co.ltd
and it have an acu7515 chip
the 2.0'' tft screen has the following information
FPC-Q90041-1 V02
QY-135H-V1
2007/12/03
it has a hynix memory chip
http://s238.photobucket.com/albums/f...cellbay/s1.jpg
i need a firmware for that one anyone knows where to find it? i have tried many many times from xp but they cant see it as an ADFU Device so i will try from win98 i just need the firmware at the moment any help will do or if something else is need to be done thanks.

Hey tadad1 do you know were that mp3 player comes from what brand because i have one similar to it.

Re: DEAD PLAYER RECOVERY GUIDE
 

can i ask for the dump.bin for my mp3 player

samsung 625
K9F1G08UDA
ATJ2051
3.5.35

thanks in advance!!

Re: DEAD PLAYER RECOVERY GUIDE
 

Hello! I have an Ankya chip based MP4 2.4",2MP camera,radio: JOY888 MP4 it is a copy of Newman k8.It is dead.when i press power button it shows "Loading... " untill i press the reset button.I can enter bios by pressing and hloding power button for 10 secs but that's all, I can't format or upgrade, it shows : BIOS KG888-5. 3. 2-LinDa-F Please press reset!.I have the newman k8 firmware but how can i upload it?Thx.

Re: DEAD PLAYER RECOVERY GUIDE
 

Hi there! Here is my problem: I've got Acme v300x mp3 player. One day it just didn't turn on. I couldn't get past acme logo (a.k.a. loading) screen. I tried DEAD PLAYER RECOVERY GUIDE but when I short pins, computer recognises player as Removable disk. I can't do nothing with it-can't format.
Please help me guys! :roll:

Thanks before for your tutorial, now my mp4 player can detect as remove USB Mass Storage Device but now i can't find the match firmware for my device.

My device :

Cryptonix 1G 1.8"
Hynix HY27UT088G2M
ACU 7515
board MC204A5F
MC205A5F V.3.0
2007.08.31

Can you help me?

i cant b able to install usb drivers...
It says......the file dont have anything for yor software.....Tell me what to do!

Re: DEAD PLAYER RECOVERY GUIDE
 

Hello!!!
I am new on this forum which I find interesting besides super.
I put on my MP3/MP4 one drove firmware and now I have a blue screen which ignites but without anything more.
I dismounted it and makes all the procedure to repair it with another firmware but I think that I will need this version of the firmware absolutely: XID-91N51-V5 of 2007-05-28/9.0.50/2005-01-09 to repair my MP3/MP4.
Please if somebody has this version of the firmware I hope that it will send a message to me.
I thank you all and all for your questions and especially for your participation in this forum. It is brilliant to have such impassioned people. 8) :cry:

how to i install firmware

I have the same problem and the same chip. But early screen was just white and nothing. Now its black and dont power on. But computer see the player. I can format it. Help me please.

Hello!!
There is nothing to make of other but wait until somebody puts on this forum this version of the Firmware: XID-91N51-V5/9.0.50.
The MP3/MP4 will not be able unfortunately to function without this version of the firmware.

hello, I have a dead mp3 player my and computer will not recognize it! I tried the recovery technique and all I have is a blue screen and a hour glass. Can I dump the memory? Please help thank you!
Board: 2007*02*18verA JB-25002
Chip #1 AK1025
Chip #2 Samsung 810 K9LAG08UOM
Chip #3 SP376AHN
Name:S1mp3 Player
Productor: Wilson Co LTD
Product ID 1101
Ver: 9.0.52
Screen size 1.8 Part # TGSI 77SH00-2

Re: DEAD PLAYER RECOVERY GUIDE
 

Hi all !
I've bought this mp4 player !

Ebay page

The problem is that I've make a mistake with it and it's dead.
I've tried the recovery ... When I put the usb i hear a sound and the mp4 is recognize as S1MP3 ADFU Driver so I think it's a good point but i can't see the mp4 logo in windows, if I use MP3 player update tool it doesn't work ( Device not detected ) and the screen is black.
I don't what is the good firmware ! I remembre that it was written 9.1.53.
I've open the mp4 and see lots of things written :

SCC 2008.02.16
SCC25-007QQV01

AK1025
8C018AB 0D3

If someone could help me it will be great ! Thanks a lot ! BYE

Re: DEAD PLAYER RECOVERY GUIDE
 

I just want to say thank you all for your help :D

Alright listen up guys...
I did a little of fiddling around for my 1 gb
nano clone mp4
ACU7515

1) download MP3 Player Utilities 4.15 and install
Note: after installing this your computer will recognize you device as "adfu something " instead of "usb device".
2) now follow the instructions on installing the AdfuUpdate.inf file on this device.
3)then install MP3 Player Utilities 3.68
then find the firmware and recover it...

if you are having trouble with mp3 utilities detecting your player, its because your player is being read as s1mp3 adfu driver.....follow these instructions...

if drivers are already installed, then uninstall or update them....


when installing your mp3/mp4 player...

1. wen the first installation screen comes up, click '3. no not this time'

2. then select 'install from a specific location'

3. select 'dont search i will find the driver myself'

4. then you should see a list of devices, select ''USB 2.0 (HS) ADFU Device' then click next

it should install, when the error comes up just click 'continue anyway'

if this doesnt work, try clicking 'have disk' and selecting the AdfuUpdate.inf fromt he windows folder, then proceed with number 4.

after that the upgrade tool finally detected my player, but so far i hav'nt been able to find a compatible firmware

please help me out somebody... i've got sony mp4 clone with 512mb,2.0 mp camera radio.
i have accidently formatted my player in bootmode and thus deleted the firmware.

i have no backup of my player,all i have now is the player working in bootmode.when i connect it to my pc it shows me 3 drives.

question is that i have shortened the pins of memory but nothing happens except the screen of player became white and blank instead of annoying "loading.." screen.

plzz somebody help me to recover this s*it.

Re: DEAD PLAYER RECOVERY GUIDE
 

It helps me with my bks25002-kv2 AK1025


Thanks!

Re: DEAD PLAYER RECOVERY GUIDE
 

Hello everyone! I just want to let you all know I fixed my MP4 player this is how I did it:
1) Put the Samsung chip in recovery mode (S1mp3.org Dead recovery guide)
2) Use windows 98. For some reason XP does not see it!
3) Down load mp3 player product tool 5.12 (use mass product tool program) when you use this software only have the MP3 player plugged in! unplug any other USB hardware like a printer. This program only sees only on USB port at a time.
4) I used BO-25002-voo 3H-L12.fw (Full firmware no FM radio)
5) The hourglass faded away after it was done installing.
6) Turn it off then turn it back on and should work!
Good Luck! :)

Hi;
I have a CW-X 1 go. I have followed your tutorial. but I have a problem, :(
I finally managed to connect my mp4 in adfu device but I not find the file "adfuUpdate.inf" help me please

Re: DEAD PLAYER RECOVERY GUIDE
 

My player is

AK1025
or hy27ut084g2m(dont know which one)

didplay
fpc888101c-v0.0
XA 0750

bord
MP-13660-TLSR v0
07/12/14 LIANG

I have try many times to reset but i the windows can't recognize my mp4 player what can i do

Help finding firmware
 

HI! Recently I bought an mp4 player from a reseller from Greece, named Plaisio, Turbo-X tp2 player. I've found that is exactly like this:
my MP4 player
or like this
My mp4 player

A simple image is here:
http://image.ec21.com/image/aerospac...MP4_Player.jpg

My problem is that I've tried to upgrade the firmware and I upgraded with a different version and now my player is DEAD. Only a white(light gray) screen is seen. For 3 times I reinstalled the firmware but I didn't found the good one. Help me please finding the good firmare and a way to upgrade, because after those tries I cannot anymore get the player in the Upgrade mode. I readed almost posts here but I didn't find some useful information to solve my problem.
I want to reinstall my old firmware or a new version, doesn't matter, I want to see my player working.
Thanks a lot!

Re: DEAD PLAYER RECOVERY GUIDE
 

hey. i recently got tired of my [strike:7915ea283a]mp4[/strike:7915ea283a] theme and i wanted to experiment a bit. so i killed it by uploading an unknown firmware just for fun and then tried to recover it. so i got to the point where its "back to life" and i can explore it but i dont fully understand the rest of the tutorial. should i upload a new firmware again but not a full version from the download section using RdiskUpdate.exe?

btw thx fot the awesome tutorial!

Re: DEAD PLAYER RECOVERY GUIDE
 

I have similar problem! I can't access with adfupdate.inf! I went to mark IGNORE, but te problem is still here! I have Brilliant Top Technology YJ - 809 with 3.5.35!!! Please help me!!!

EDIT: I solved my problem!!! Now I can use my player like before!!! Btw, only I need is 3.5.35 with music browse, but I don't know where to find it?! Can anyone post me someone like that if anyone have that kind of firmware?!

Re: DEAD PLAYER RECOVERY GUIDE
 

hey guys....i got my mp4 back to the "ADFU" state but if i open up the upgrade tool it doesn't see my mp4 any help pls

recovery guide works
 

thank you thank you thank you.
just did the recovery guide you put up. perfect.got my mp4 player working again in 5 mins!!
thank you sooooo much

Re: DEAD PLAYER RECOVERY GUIDE
 

hello friends, I cannot achieve that my mp4 arrives to the state of ADFU, please he/she helps I have already read different times the guide and not yet it passes anything.

Re: DEAD PLAYER RECOVERY GUIDE
 

Hallo :)
First of all, thank you for the advices in this forum which is very helpful.
I am new member, I have the same problem and I'd like to ask in this forum perhaps someone can help me to solve the problem of my mp3 player.

1. MP3 player was fine until when I update the firmware, mp3 player no longer running even blank ..
I check in Windows Explorer, the removable disk is not detected.
Unfoftunately I don't have firmware back up :(

2. I re-installed the driver of my mp3 player. After the install, in the tray at the right top of the windows shows the USB 2.0 (FS) ADFU Device is detected.
When I plug in MP3 player unplug devices, the speakers alert sounds detected.
But when I check the windows explorer in the removable disk is not detected
I tried the mp3 player utilities.. still, removable disk is not detected ..

Then I check in computer management-disk management, there is also a removable disk is not detected ..
Even devices usage is enable (use this device)

I don't know how to solve it.. I cannot edit/delete or format my mp3 player because the removable disk is not detected :(

I bought this mp3 player in ebay several months ago, so I don't know where to get service and I can't return it.

This is an example pic which is very similliar to my mp3 player:
http://imgs.tootoo.com/3b/82/3b82f05...affd1f06b7.jpg


One more question, I wonder how to find the correct firmware for our mp3 player? where to find it? is there any way to know the correct one?
My mp3 player spec: Samsung 552 K9W8G0801M PCB0
ATJ2051
It's Car Mp3 player FM with Transmitter

Guys, please help me..
Please forgive for my bad English

Thank you

Re: DEAD PLAYER RECOVERY GUIDE
 

After following your instruction in the page 1, finally my mp3 player removable disk show up in the windows explorer :)
And now I also can edit, delete and format it.
I installed it with firmware v9.2.19
I don't know is it the right one or not
At least the mp3 player is detected by the computer and shows up in the windows explorer. Thanks admin :)
The problem now is the mp3 player can't turn on, the screen still blank :(.
Is there any idea to make it work again?
Please..

plz i need help
my PC it see the mp4 like an unknown device removal
i did what i have find in the guide but whene i select the file adfuUpdate.inf and ok
my pc say that that there is no driver ther please what should i do ,

Re: DEAD PLAYER RECOVERY GUIDE
 

thanks
I was able to make the computer recognize mp4
But the problem thqt whene i try to recover the firmware in my mp4
my mp4 turn off
then worked again and the firm ware not received
http://img90.imageshack.us/img90/1713/sanstitrekf4.png