It seems that the ALI chip you mentioned ... an article is discussed here:
myMPxPlayer.org :: Links to firmware for MPx players
If you go down to the last post in the page, the firmware link is given by "maxx_aypoh" as:
Index of /soporte/Firmware-Manuales/Master-G

But I don't know if the firmware had worked for the problem posted by "arm" on that page.

I will try and contact more people in this and other forums in China to find out the right firmware.
Keep Trying.......

Thanks a lot

I have not find any firmware for my mp4 ;)

i have an mp4 player :-? i think music man m-251 chip anyka ak31lq14402 fs05a8 board cxpmp601_v2_080215 i don't find the correct firmware pls help me :(

want the firmware
 

please send me the firmware
my player is Ipod Nano Clone 1.8 inch screen as shown

Please help, I am under the instructions and choose when I jump so adufupdater.inf message The specified location does not contain information about your hardware. I have Win XP

i guess this is the right place to post this. i have two mp4s, one is a 3rd generation 16gb ipod clone, and the next is a pasbuy 2gb mp4. both are fm radio compatible. the ipod clones data are

samsung 807
k9hcg08uom
pcbo

chip: sgs851

board id: qolzi g19a

i cant find firmware that matches the board. the closest i see is golzi g18a but i cant download it because it is a chinees pay site. can anyone help me get this firware?

PASBUY

this one died while i was flashing it because the original firmware was corrupt. i got them both to read as adfu server but i cant find specific firware for them both. its detail is
hynix kor
hy27uf08962a
tpcb

chip : ak1025

board: qs91b13

FIRMWARES NEEDED ASAP

need help.. adfu..
 

I followed this guide until you have to upload "AdfuUpdate.inf" .. After I upload and give the "ok", I received my message "The specified location does note have information about your hardware "... if I click "OK",it send me back to the step I have to upload "AdfuUpdate.inf"
pls help

adfu.. help
 

my mp4 player is feeman, Chipset : ACU 7515; Memory chip : Hynyx hy27uv088g5m
I read that I must rewrite AdfuUpdate.inf file.. but I don't know how
If anybody can help me, please post here or write me an email
tahnks

i can help you with the adfu server modes, its simple

i need firmware for
BOARD: KGMP888-GAME-AK-V3.2, 2007-08-03
1st bootloader : Anyka__AK3221MB22405__FA0487
2nd bootloader : Samsung 719 K9G8G08U0M_PCBO
the devices show "Loading..." on start. When i connect it to PC and press some combination (menu+ power+ play + usb connection), the PC detect 3 partitions (13,9MB - 1,93MB - 991MB) after doing low-level partition. Please help me to solve this problem. thx

Sorry for my bad english

PROSSESSOR: ak1025 2H034AB 0J1
MEMORY : hynix HY27UU08AG5A TPCB 852A
board: K0129H2V2M
please firmware and program. I cant find it

Please,i need Help!i have

APACER AU822 512 MB version 3.5.7 (wilson coldt corporation),i need the same firmaware,probably original because i found one fake... :(

my Apacer has No USB conectivity,so i done first steps from PAGE 1,BUT i stuck on AdfuUd.SYS file....

I DONT NO HOW TO MAKE AdfuUpdate.inf (if some coud make inf. file for me, :) )

ALL INFORMATION I CAN GIVE ARE:

on the apacer plastic:W-KLM123A01.B060419.S2

device name=S1 MP3PLAYER
productor=wilson Co ltd
MEMORY CHIP:
SAMSUNG 622 K9F4G08UOM

CHIP:ATJ2085H

Vendor id :10D6
Product id :FF51

if anyone can solve how to make my computer recognize apacer,i will be 90 % happy,because i have found life-dead firmware which can give some signs of life

help :(

Hi Zoran2011
I don't know your exact problem... looks as if the your player's info is not in the AdfuUpdate.inf file. If that is the case than you will have to edit this inf file in Notepad. The following thread will help you through:

Change AdfuUpdate.inf

Take Care

[Version]
Signature="$CHICAGO$"
Class=USB
;ClassGUID=1181f4a0-f284-11d2-9068-00609797ea5a}
provider=%MSFT%
DriverVer=08/18/2005,3.0.0.0
LayoutFile=layout.inf

[Manufacturer]
%MfgName%=Upgrade

[Upgrade]
%USB\VID_10D6&PID_8888.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_8888
%USB\VID_10D6&PID_ff51.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_ff51
%USB\VID_10D6&PID_ff61.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_ff61

;[PreCopySection]
;HKR,,NoSetupUI,,1

[DestinationDirs]
umss.files = 10,System32\Drivers

[MDisk.install]
CopyFiles=umss.files
AddReg=umss.addreg

[MDisk.install.NT]
CopyFiles=umss.files
AddReg=umss.addreg

[MDisk.install.NT.Services]
Addservice = AdfuUd, 0x00000002, AdfuUd_AddService

[AdfuUd_AddService]
DisplayName = %USB\VID_10D6&PID_1160.DeviceDesc%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %10%\System32\Drivers\AdfuUd.sys
LoadOrderGroup = Base

[umss.addreg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,AdfuUd.SYS

[umss.files]
AdfuUd.sys

[SourceDisksNames]
1000 = "USB Mass Storage Device",,,

[SourceDisksFiles]
AdfuUd.SYS = 1000

;---------------------------------------------------------------;

[Strings]
MSFT="MP3 Player"
MfgName="MP3 Player"
USB\VID_10D6&PID_8888.DeviceDesc="USB ADFU Device"
USB\VID_10D6&PID_ff51.DeviceDesc="USB 2.0 (FS) ADFU Device"
USB\VID_10D6&PID_ff61.DeviceDesc="USB 2.0 (HS) ADFU Device"

what i must change on this up informations,what is classguid?where can i find it?please bold what i must change,because there is still no usb conectivity,no access to disk of apacer

device instant id:USB\VID_10D6&PID_FF51\5&734D4C1&0&2
APACER AU822
VERSION 3.5.37
on the apacer plastic:W-KLM123A01.B060419.S2

device name=S1 MP3PLAYER
productor=wilson Co ltd
MEMORY CHIP:
SAMSUNG 622 K9F4G08UOM

CHIP:ATJ2085H

Vendor id :10D6
Product id :FF51

can you please make for me inf.,and send me to my email dilberyboy@hushmail.com if you are profesionall :)

zoran2011
your players info is in that inf file so it should load the drivers for you. Just put your player in that adfu mode and go. if you have other problems you may place it here and we will help you out.

but my apacer is still no recognize,without info about my player i cant do upgrade some firmware...i dont see my disk space in apacer...computer cant recognize my device because i gave my apacer wrong info,you can see that is written in inf ------------Source DisksNames]
1000 = "USB Mass Storage Device",,,-----,BUT I HAVE ONLY 512 MB STORAGE hehehehe,and im not sure for other components in that inf file..so i asked you to help me create inf file for my apacer 512 mb,if you know

Zoran2011
Check your email and try the files
TC
Mabboseg

I Updated MY mp4 player with wrong firmware and now it is not starting what to do?..now the player is even unable to connect my pc so do any one know what to do? and how do i connect to my pc ?plz help my email address is edwinz_flamehaste@yahoo.com

but there's nothing 2 chips inside my china sony mp4... T_T

Help!!!
 

hey, ehm please can you help me?...
i have an dead player to.
is mediacom ME-JB1858B and is an mp4. and i tried the step with the tweezers but stell dont work.
please help me.. form more detailes send me an message ( soory for my bad english XD )if you help me ill oer an bear :D

edwinz13
Have you saved your old (working) firmware ??

If not than you maynot be able to unbrick it !!!!!!! annd get it working again.

Post a picture of your player and see if you could find a working firmware for it.

Mabboseg