lefrosth, If that is the case I doubt you will be able to recover the memory either because part of the chip has failed or it is an incorrectly labeled 256MB chip.

The only other thing I can think of and it is just a guess is that the firmware you used to recover your player has put some limitation on the chip.

When you first tried upgrading the firmware did you do so because you where you having problems with the player?

abumazen do you have more information on your MP3? What is your ship? ... Do you have a pic? Do you want a firmware?))))


my friend lefrosth,,

my player is white one G 1.5 style sony mp4 player

this is a picture of a mp4 like my player

http://www.mympxplayer.org/image-asp205.html

and i want the compatible firm ware for it

(((((abumazen, What have you tried so far to recover your player?
What is happening with it at the moment?
When did the problem start?
)))))

tedad 1 the problem started a week ago when I tried TO UPDATE MY MP4 WITHOUT MAKE A BACK UP OF THE ORIGINAL FIRMWARE (NOW THE SCREEN IS DARK BLUE). MY TROUBLE IS KNOW THE RIGHT FIRMWARE FOR MY MP4

i tried some firmwares but no good result

my vesion again is:

sc8505 1f

25/4/2006

act_v3.5.35

1.5 inch

1 G

sony player

please help me

Yes but, i have buy 3 MP4 similar on ebay the same seller. I m only just have this problem ...

abumazen, Have you tried these with link form tadad1.With me that work
http://www.mympxplayer.org/some-9048...ds-vt2895.html

lefrosths

i tried it but does not work

i told you that the version is 3.5.35

made also in china

if you find a chinese 3.5. 35 firmware please send me it

Guys, do you know how long it takes Uxcell to respond? its been 3 days and I sent them 2 emails, no response yet.

Thanks.

I START TO UPDATE MY MP4 WITHOUT MAKE A BACK UP OF THE ORIGINAL FIRMWARE (NOW THE SCREEN IS DARK BLUE). MY TROUBLE IS KNOW THE RIGHT FIRMWARE FOR MY MP4.

THE SPECIFICATIONS OF THE MP4 ARE THESE:

MEMORY: samsung 637 K9F4G08U0A PCB0

BOARD: MP-693C-SL KEY V1.2 KNIFE 051111

CPU:ATJ2085H

4 GB

COLOR:BLACK LIKE IPOD NANO

I HAVE DAYS SEACHING IT!!

GIVE ME SOME OPTIONS TO CHOOSE
(IF I HAVE MORE THAN ONE FIRMWARE THAT CAN WORK PLEASE TELL ME)

Re: DEAD PLAYER RECOVERY GUIDE
 

Hello to everybody.
I'm trying to find the right firmware for my Mp3/Mp4 player, a black Nano clone. I was able to make it readable by my pc as a usb disk, but the display is still white.

HERE SOME SPECIFICATIONS:
Memory chip: SAMSUNG 622 - K9K8G08U0A 1GB
Processor: ATJ2085H
MAINBOARD: MP-752C-SL MAIN KNIFE 051207
DISPLAY: FPC-VP6620-01A_56 2006-04-04


Here some pictures of the player and the menus as before.
I hope someone could help me, telling me which firmware to load.
Thank you very much, and great job with this forum!

http://www.webalice.it/nveronesi/MP4/cover.jpg


http://www.webalice.it/nveronesi/MP4/pcb.jpg


http://www.webalice.it/nveronesi/MP4/front.jpg

http://www.webalice.it/nveronesi/MP4...ipod_clone.jpg

Re: DEAD PLAYER RECOVERY GUIDE
 

Hi there,
I have MP4 S1MP3 player with signature on the main board: "wp-693c-sl main v1.3 2005.12.14", 512MB, no FM. I tried to update the firmware but with wrong one :cry: . The player was totaly dead but i read some postes in this forum and it's now alive BUT without ebook and games :roll: . Can anyone help me how to activate them :wink: and where to find more games for it :D

Please e-mail me or write to me on ICQ 112705619 for some solutions :roll: