DEAD PLAYER RECOVERY GUIDE

Kasparz · #**601** (**permalink**) 14th Mar 2007, 12:34 am

Opened mp4...
CPU chip:ATJ2091N
Memory chip: Samsung K9LAG08U0M PCB0
Tried most 9.0.xx fullflashes, but it always say "Read or write device failed"

lattesurf · #**602** (**permalink**) 14th Mar 2007, 6:05 am

Kasparz , try using other versions of MP3 Utilities. If they do not work and still give the same error, try using Product Tools.

Kasparz · #**603** (**permalink**) 14th Mar 2007, 8:03 am

Im using 3.5.01, 4.05, 4.09 Mp3 player utilities and 4.19 procuct tools.
They just dont work.
When im flashing full fw i hear sounds that device is disconnected and reconnected again. Weird.

Ragab911 · #**604** (**permalink**) 14th Mar 2007, 11:15 am

hi everyone i know to MP4 world , but i got this problem my MP4 (ipod video) http://www.mympxplayer.org/image-asp194.html
would`t login and when i attech it with the usb cable it got this blue screen says Press meu key to format
the pc see it as mass storage not adufdivce which is the problem couse mp3 player utilities would not see it , also i need firmware for it ...... plzzzzzzz help thankx

Kasparz · #**605** (**permalink**) 14th Mar 2007, 11:47 am

If your PC recognize your player as mass storage, format it to FAT, and than flash fw.
But im still :cry: about my player, because that was present for my little sister, and it died without any flashing or so, just turned on and nothing happened.
Seller has 4k+ feedback, 98.7%positive feedback, and 2days ago went to "No longer registered user" status. I emailed him yesterday, and he answered. But didn't worked out this problem.
Im going to buy few 2Gb 1.8' Chinapods then...

Ragab911 · #**606** (**permalink**) 14th Mar 2007, 4:16 pm

I formated it and i still get device not detected when i am
trying to flash it .... any one can help , thanks kasparz anyway

ducpro · #**607** (**permalink**) 17th Mar 2007, 4:24 am

HELP ME
Em co may MP4s1 up sai firmware
Em da lam theo huong dan nhung khong duoc
Rat mong co huong dan = tieng Viet

Ragab911 · #**608** (**permalink**) 17th Mar 2007, 11:10 am

Help the mp4 does not response at all , could it be dead for good or what i tried the recovery but it did not work
could it be the ship or what help plzzzzzzzzzzzzz

tzl · #**609** (**permalink**) 19th Mar 2007, 12:24 am

Help me please!!
Some one please give me the firmware of the following:

Board : MP793-CV1-STL
Mem Chip : Samsung 625 K9K8G08U0A PCB0
Processer Chip : ATJ2085H
Serial : RX-8830077

If someone have firmware for that player, pls share for me here, or u can send it to phoeshoat@gmail.com
Thank you.

lattesurf · #**610** (**permalink**) 19th Mar 2007, 6:06 pm

Ragab911 , the shorting of the chip's pins is a trial & error method. Sometimes it takes a few seconds, sometimes a few hours. You'll need to keep trying.

tzl , your player would be using either the v3.5.35 or v3.5.37 firmwares. There are many of these firmwares in the downloads section.
http://www.mympxplayer.org/actions-3535-dc15.html
http://www.mympxplayer.org/actions-3537-dc16.html