Re: DEAD PLAYER RECOVERY GUIDE
 

i used the clone program before i crash my player but i'm guess i left songs on there and it also put that in the file cause the dump.bin is almost a GIG in size. also now i can't get to my player through explore, it's getting detected though and stuff but it doesn't show the drive under my computer, any thoughts?

Re: DEAD PLAYER RECOVERY GUIDE
 

Hello everyone. Sory for my bad english , but I want somebady help me. I have mp4 player BLACK PEARL , this is the pictures of player
http://skruji.hit.bg/ALIM0002.JPG
http://skruji.hit.bg/ALIM0003.JPG
http://skruji.hit.bg/ALIM0004.JPG
I kill my player and I can't fix this problem. I read this theme and dry to recover it. dry many versions of software , but they don't work in my model. :( :?: :?

P.P. The version of firmware is 9.0.49 and I can't find this version anyware. If anybody have this firmware send it to skruji@gmail.com
10x

Re: DEAD PLAYER RECOVERY GUIDE
 

I am looking for a working firmware for:

• 1.5" Clone
• Chip ATd2091N
• Hynix QQ1GM HY27UU088G5M
• Has E-book, Telephone, FM Radio

Bought on eBay listed as 8GB but when using the checker suggested in Recovery Guide shows as 1GB however the Hynix chip checks out as an 8GB chip, so am wondering how that was accomplished. I am fine with 1GB but would just like to get it to work.

In the present firmware 9.0.50 it hangs on hourglass (Startup). It came on a couple of times for me to back up the data but after using S1FX to backup firmware, it will not boot up at all, just hangs on hourglass. Every 9.0.50 firmware on this site has failed so far. I know there are others out there with this device as the eBay seller sold over 30000 of these.

Please help!

lynnymoore , the Hynix HY27UU088G5M is a 8Gigabit (1GigaByte) chip, as 8bits = 1Byte.

At this moment, the S1fwx tool only supports upto v9.0.43, so your version could not be extracted. Likewise for the other users with the same version as yours. So you would find problems locating a suitable firmware.

If those in the downloads section do not work, i'll suggest you contact your seller for an exchange or full refund.

Re: DEAD PLAYER RECOVERY GUIDE
 

Just curious, does anyone know how come my Hynix QQ1GM HY27UU088G5M (8Gb) chip only formats to 1Gb? I followed the testing procedures exactly and they definitely show it to be 1Gb MP4 Player.

Re: DEAD PLAYER RECOVERY GUIDE
 

after a month of searching for a suitable firmware for my dead i-nickel, and many more months of waiting for one, i can give only one advice:

stay away from these s1 players. the producer is clearly not interested in a solution, just in selling shitloads of these things

i have a meizu m6 now and that thing works and has decent support from the supplier

no offence to the owner of this board ofcourse!

Hi everybody, I think that it is a great guide, I don't need open my mp4, my PC detect the device, and install with USB 2.0 (FS) ADFU device, but later it's not appear on my explorer, and I can't upgrade with MP· Upgrade Tool,

What can I do???

Please sorry if my english is so bad, I from Cuba Ok

Thanks

Re: DEAD PLAYER RECOVERY GUIDE
 

Hi everybody,
please can somebody helps me with my problem? My 2 players were dead so I have followed the recovery guide to the letter and everything goes well until the time comes to load the firmware. It is at this point that the upload gets stuck at around 30-40%. Exactly like this: http://www.mympxplayer.org/image-full-asp187.html
It stopped always at five blue squares. I tried it many times, but always the load progress stopping at the same position for both players. Also I tried to use 3 different types of upgrading tools, version: 3.68, 4.05, 4.13, but still the same problem.

Please help me.
Thank you.

Re: DEAD PLAYER RECOVERY GUIDE
 

hi all...
i have a trouble
i have update firmware 3.37 v21b
my firmware is 3.37 before update
my ipod screen is always blue... and now the ipod can't be detected by PC

WHY??? PLEASE HELP ME QUICKLY

i've been frustated

must i try short the IC?

is there other way without short it???

thanks all

--------------------------------------------------------------------------------
I have a mp4 player (1.5" , 4 GB) and I only had it a few days when the computer couldn't recognize it anymore. I can still play the songs but my computer don't recognise it. I've opened it and tried to fix it (like discribed in topic "dead mp3 player" but still it isn't recognised.

My firmware is 9.0.50

I had to work hard for this player and I really want it to work again