DEAD PLAYER RECOVERY GUIDE

jony_valencia · #**731** (**permalink**) 25th Aug 2007, 4:53 pm

sorry my friend I already did your guide, but my mp4 is not recognised by your computer help my please, my computer not show anything.
my ship is K9LAG08U0M SAMSUM

lattesurf · #**732** (**permalink**) 25th Aug 2007, 7:04 pm

jony_valencia , as mentioned previously, You will need to keep trying until you get the player to reboot, and the computer to detect and install it as ADFU.

The dead player recovery process is entirely upto the individual. If you don't want to continue shorting the pins, there is nothing we can do about it.

rpr0123 · #**733** (**permalink**) 28th Aug 2007, 6:30 am

after some bad firmwares my device says me flash is no responding please somebody help me

SnowWhite · #**734** (**permalink**) 28th Aug 2007, 10:09 pm

I have a problem with my mp4 player...
mine is look like the one in this page...
1.5 inch 1 G mp4 player...
i can see just blue screen now...
however, it can be detected by PC..
according to this recovery guide, i think i am in the final step and i just need to updoad dump.bin file...
how can i get that file..
i have no back up file...
i have tried to upgrade with a lot of firmware...
but...it doesn't work till now...
pls help me...tatad1...
thank in advance!!!

SnowWhite · #**735** (**permalink**) 28th Aug 2007, 11:00 pm

Hi...Pocket_Nano
can u save ur mp4 player now?
mine is also show just blue screen...
if u could did, pls tell me the way..
Thanks!

darrent · #**736** (**permalink**) 29th Aug 2007, 4:41 pm

This is a nice and detailed tutorial but a very important step missed.

In order to update the firmware "the player should be recognized by the computer" first. I mean your computer should allocate a drive letter to the player and you should see it under My Computer as a USB disk. Because it is not written clearly, I end up trying all the firmware versions for many hours, but it always stucked during flashing process with MP3 Player Utilities - Upgrade tool. It was just saying "downloading restorable main program". I realized that when I first saw the Update the firmware for your MP3/MP4 player tutorial written by admin.

Just a note...

lattesurf · #**737** (**permalink**) 29th Aug 2007, 9:40 pm

SnowWhite , do you remember your previous working firmware version? If not, you'll need to open your player and identify the processor's serial number (eg ATJ2085, ATJ2097, etc). This way it'll be easier to know which group of firmwares to try.

SnowWhite · #**738** (**permalink**) 29th Aug 2007, 9:51 pm

Dear Lattesurf,
i have already open my player..
on board, it is written...K9K8G08U0A PCB0
and beside (LCD) CM50011-02AL..
but..i can't find any firmware that is compatable with it...
if u can, pls help me..
thanks in advance!!!

SnowWhite · #**739** (**permalink**) 29th Aug 2007, 9:52 pm

Dear Lattesurf,
i have already open my player..
on board, it is written...K9K8G08U0A PCB0
and beside (LCD) CM50011-02AL..
but..i can't find any firmware that is compatable with it...
if u can, pls help me..
thanks in advance!!!

SnowWhite · #**740** (**permalink**) 29th Aug 2007, 9:52 pm

Dear Lattesurf,
i have already open my player..
on board, it is written...K9K8G08U0A PCB0
and beside (LCD) CM50011-02AL..
but..i can't find any firmware that is compatable with it...
if u can, pls help me..
thanks in advance!!!