Re: DEAD PLAYER RECOVERY GUIDE
 

i tryed all the full firmware from download and the seem. i have blue screen on the firmware and my player it seen in explorer.

You are stupid !!! go to first page of this topic :D:D

now your player is partly fixed.
you should load the dump.bin if you have it or load some other firmwares from this site into your player.You do not have to put in the full firmware now.
Your player will recover if you put in the correct firmware now.
good lck

Re: DEAD PLAYER RECOVERY GUIDE
 

Re: DEAD PLAYER RECOVERY GUIDE
 

oh yeah!
almost forgot.i cant remove the hack,my mp3 player disk tool always gives the following error whenevr i try to format my player'this disk type not supported'.and if i try to format it from the the windows format then nothing happens except all my music getting deleted.what should i do?

Re: DEAD PLAYER RECOVERY GUIDE
 

ok thansk all the people of this forum the player its works :))))) but i have another problem. Firstly i have 4 GB and now i have only 1GB. and the question how to hack chip from 1GB to 4GB becouse i have these size on my player firstly :(.

samsung 625 k9k8go8uoa pcbo (1GB)
ATJ 2085W

mrbeny81, Thats great :) , sorry once the hack is removed there is no way to put it back.

I am not sure... I thought I read it on s1mp3 that it is possible...

Re: DEAD PLAYER RECOVERY GUIDE
 

mrbeny81, anyway... you have a sticker on your back site "4gb" don t you ?
I have it too... But my is 2gb...

Re: DEAD PLAYER RECOVERY GUIDE
 

yes i have sticker on back player "4GB" mayby i can doit some like this to have mor space becose i have to mor space on my player http://wiki.s1mp3.org/index.php/How_..._a_memory_chip :)

I haven t got more money to buy new memory chip :(

Re: DEAD PLAYER RECOVERY GUIDE
 

me to :(

Hi! Please help! I don't know what to do with downloaded firmware file. How can I upload .fw file to my player?

DO NOT DO IT if your player is not dead !!!

bad luck

hi everyone, i think my player is dead.
when i turn it on it shows a blue screen for a couple of seconds, then turns off and switches itself back on, gives the blue screen for some moments und turns off only to switch back on in an instant.

my computer obviously doesnt recognize the player anymore. i must have had a curript firmware file.

but anyways,

is my player dead, should i follow the steps in this guide? or is there another way to get my player working again?? maybe a way where i dont have to open my beauty?

many thanks in advance - ppowle!

ppowle, Please do not double post :(

Re: DEAD PLAYER RECOVERY GUIDE
 

hey
i need help with my 1.5inch 1gb black nano clone.

http://www.mympxplayer.org/dload.php...le&file_id=186
Firmware Version Info:
SC85051A
26/03/13
ACT_V3.5.35

In the given url tadad1 has given a procedure to fix this player.The problem is that the full firmware '3.5.37v2.1b'has worked but when i try
to install the 3.5.35 dump from the mp3player utilities then it gives an error saying that the firmware is invalid.If i try to repair the dump then it says that it cant be repaired.
please help
thanks

Re: DEAD PLAYER RECOVERY GUIDE
 

hey
i need help with my 1.5inch 1gb black nano clone.

http://www.mympxplayer.org/dload.php...le&file_id=186
Firmware Version Info:
SC85051A
26/03/13
ACT_V3.5.35

In the given url tadad1 has given a procedure to fix this player.The problem is that the full firmware '3.5.37v2.1b'has worked but when i try
to install the 3.5.35 dump from the mp3player utilities then it gives an error saying that the firmware is invalid.If i try to repair the dump then it says that it cant be repaired.
please help
thanks

sratra, Did you format the player after installing the full version firmware?

Re: DEAD PLAYER RECOVERY GUIDE
 

tadad1
sorry ,accidently made 2 posts :oops:
i formated it and still the same problem.

sratra, Try another dump and see if you get the same message, if you do try a different full version firmware then the dump again.

Re: DEAD PLAYER RECOVERY GUIDE
 

tadad
ive tried diferent firmwares and i dont get the error but they dont work in my player. :(

sratra, Where did you get the one that you can not use?

When I try to upload a firmware, the program shows an error: "Update verification failed" Please help! what can I do? I have a Sigmatel MP4 player zc-45.

ActivatedTM, What firmware are you trying?

MS5541FW_v006.002.009

sigmatel_2.600.600

And there is onother error message, when I use older Sigmatel upload software... I attach player
to computer, there is a sound and then I copied sigmatel_2.600.600 files to Sigmatel upload directory and ran updater, and then it shows
an error message: "Unable to write firmware file data"

Can someone please help me? I recently purchased a black iPod nano wanna-be of 4GB and I went to upgrade the firmware and it did that 'blue screen' thing. I have followed the DEAD PLAYER RECOVERY GUIDE but I still have a blue screen staring at me...what can I do?

innocent_imperfections, The hardest part about trying to recover your player is finding the right firmware. There are 100's of variations each built to suit specific hardware components. Your only option is to keep searching and trying firmware that suits your player screen size until you find one that is compatible with your player.

What chipset is your player using?

Re: DEAD PLAYER RECOVERY GUIDE
 

tadad1
do you mean the full firmware?

Re: DEAD PLAYER RECOVERY GUIDE
 

tadad1
i had got the full firmware from;

http://www.mympxplayer.com/dload.php...6364da93f003b1

and the dump from;http://www.mympxplayer.com/dload.php...le&file_id=186

sratra, Ok well I tested the dump and it is ok so it is most likely just not compatible with your player. I can only suggest that you keep trying the other dump files. If you have no luck try a different full version then try the dumps again.

Please Help! What I need to do to upload a full firmware on my Sigmatel based mp4 player zc-45 (1.5'' screen, 1GB, FM,...) U can send help to my e-mail too activated@inbox.lv

Please, please help.... ;(

What can I do with .bin files? How I can upload them to my player? Do I need any software to do that? PLZ HELP!!!! :(

DO NOT PANIC and read guides man;)

Good man :wink:

ActivatedTM,
Sigmatel chipset firmware is very different to Actions chipset firmware which you can not load to your player.

Sigmatel firmware generally comes with it's own install. We only have a couple of Sigmatel firmware on site.

http://www.mympxplayer.org/sigmatel-firmware-dc36.html

tadad1,

I think that Sigmatel firmware 2.600.600 is the right one for my player,but when I try to upload it, then at the end error message appears: "update verification failed" What does it mean and what can I do?

ActivatedTM, I have never owned a Sigmatel player so sorry I am not familiar with the upgrade process.

Have you checked out the Sigmatel forum at s1mp3.org
http://forum.s1mp3.org/viewforum.php...9ccad2e5aea5db

How do I find out what chipset it is using? This is the ebay link for the mp4/mp3 player I purchased: http://cgi.ebay.com.au/ws/eBayISAPI....MEWA:IT&ih=016.
Please tell me how I can fix it as I have only had this player for a short amount of time. Thank you.