DEAD PLAYER RECOVERY GUIDE

lattesurf · #**791** (**permalink**) 29th Sep 2007, 8:10 pm

reactos , record down FF61 somewhere.

Now open the ADFUupdate.inf file with notepad. Look for the section beginning with [upgrade]. Add the following below it:

%USB\VID_10D6&PID_FF61.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_FF61

Now look for the [Version] section, and locate this line:

;ClassGUID=1181f4a0-f284-11d2-9068-00609797ea5a}

The numbers maybe different from mine, but the steps are the same.

Remove the semi-colon " ; " from the beginning, and add an open bracket " { " at the beginning of the numbers. So you should edit it to something like this:

ClassGUID={1181f4a0-f284-11d2-9068-00609797ea5a}

Finally save the new ADFUupdate.inf file, and try installing your player using this newly edited file. See if this works.

lattesurf · #**792** (**permalink**) 29th Sep 2007, 8:11 pm

Demonkyo , try uninstalling your current MP3 Utilities and install another version instead, there are many versions in the downloads section. See if this solves the hanging problem.

reactos · #**793** (**permalink**) 30th Sep 2007, 2:10 am

Quote:

Originally Posted by lattesurf";p=&quot

reactos , record down FF61 somewhere.

Now open the ADFUupdate.inf file with notepad. Look for the section beginning with [upgrade]. Add the following below it:

%USB\VID_10D6&PID_FF61.DeviceDesc%=MDisk.insta ll,USB\VID_10D6&PID_FF61

Now look for the [Version] section, and locate this line:

;ClassGUID=1181f4a0-f284-11d2-9068-00609797ea5a}

The numbers maybe different from mine, but the steps are the same.

Remove the semi-colon " ; " from the beginning, and add an open bracket " { " at the beginning of the numbers. So you should edit it to something like this:

ClassGUID={1181f4a0-f284-11d2-9068-00609797ea5a}

Finally save the new ADFUupdate.inf file, and try installing your player using this newly edited file. See if this works.

i have done this many times but the computer say that some thing is missing in the inf file

Demonkyo · #**794** (**permalink**) 30th Sep 2007, 8:49 pm

i tried many utlities, and still having a hanging problem.......i found the right firmware finally...because a photo a person put with it was the same as mine, but...i can't seem to get past the hanging problem.

aqibracer · #**795** (**permalink**) 2nd Oct 2007, 2:56 am

Hi Everybody! I Need EXTREME HELP! please! I have a China mp4 it says Sony but Actually is a Sunplus SPCA-536a. i Have Installed the wrong Firmware! and now *crying* she is Dead! Please help me recover her! its hard to find the firmware and also i have treid the giude but no use! i have treid in every single way but no sign of detection! i will post pics of it soon. Please reply ASAP! Thank You

IT IS SAME AS THIS ONE!! Thanks

Demonkyo · #**796** (**permalink**) 2nd Oct 2007, 9:39 pm

AHHHH!!!, i downloaded a firm ware into mine finally that actually went through , because i found it was for the same model as mine, anyway...the screen turned black...and now i don't know what to do....i guess its dead...but now what.. ?

vjannus · #**797** (**permalink**) 3rd Oct 2007, 2:32 pm

Help!

I to put up new firmware in Mp4 player. Since then doesn't work

.
chip:samsung 716
This is my player:
http://cgi.ebay.com/ws/eBayISAPI.dll...MEWN:IT&ih=019

itsme · #**798** (**permalink**) 3rd Oct 2007, 2:35 pm

Hi there .

So i tried to recover my mp3 player and wanted to bring it to adfu mode and so i downloaded the adfuupdate.inf system file
but as i wanted to install it sais "The specified folder does not contain hardware information"

and what is the second file aduud.sys good for?
or maybe im extracting th files into the wrong folde....
so please help me....

sharon_1 · #**799** (**permalink**) 5th Oct 2007, 12:02 am

hello, with my Player does not give it pins on a plate. How can I high-load you a picture that it the interior life times see? Do not get the Player with the guidance unfortunately again... Thanks :evil:

urielfogha · #**800** (**permalink**) 12th Oct 2007, 6:51 am

hello! i still have problem whith my mp4 after doing all the DEAD PLAYER RECOVERY GUIDE method my problem is between firmware and updat application beacause when i whant to flash firmware the mp4 screen ligt and application make an error like "read or write device information failed exit the application and check if it's connecting" and when restart it's writen update success. i've try another appliclation"product tools" when i flash whit it there is no error but it don't succeed to flash when i want to flash again it show me that the first have succeed please help me i'm......... :cry:
atj2085w
samsung625
k9f4g08u0a that's the reference of my mp4
thank u