DEAD PLAYER RECOVERY GUIDE

[nintendo]

[img(=left|right)]http://data.yandex.ru/i?ctype=1&path=b0404134229__AM52.jpg[/img]
this is my player and here's the firmware that brings it back to life
http://www.ixtone.ua/downloads/1817W1.8_CTW500_.rar
and i wanna add that just dragging on contacts is not enough. I put the pincers and hold it for about 1-2 seconds to have shorting

[luki69]

I have a problem. When I'm trying to remove screws from my player (http://www.techgadgetforums.com/files/ibob.jpg) they are turning around, but they aren't unscrewed. What I should do?


Sorry if my English is bad.

[monkey_@@]

Hi javier4, I've tried that but the vid & pid are always 0000.

So, is there a way to quit that usb disk blue screen in my device?

TIA,

M

[Basket23]

Originally Posted by Vodafone";p=&quot

I have a MP4 Player like in this pictures


img137/6975/14122007zj8.th.jpg[/img][/URL]


and I don't know how to take out from the shell :roll: :?: :?: :?:

Hi!
It is easy First you must remove 2 screws, then plastic detail. Neatly remove the keys by screwdriver. (They are simply taped, you will nothing break Then push plate to screen upwards. http://basket23.narod.ru/DSC00092.JPG

[navygm1983]

I have done all the process for the dead player..now I'm stuck in the blue screen, im uploading the firmware but nothing happens! blue screen is remaining.. I tried lots of different firmwares v9.xxxx but with no success.. any help?
thanks

my player is the ipod nano like.. AK1022 samsung chip

[Srdls]

My computer detects the MP4 Device as USB Device but not the information AdfuUpdate.inf file, my usb device has this chain "USB\VID_10D6&PID_FF61 \ 6&1D7EFA5E&0&1" same chain that is not in the adfuupdate.inf

I can be able to load drivers?

Maybe adfuupdate.inf modify the file?

Please Help with thank you in advance

Originally Posted by Srdls

My computer detects the MP4 Device as USB Device but not the information AdfuUpdate.inf file, my usb device has this chain "USB\VID_10D6&PID_FF61 \ 6&1D7EFA5E&0&1" same chain that is not in the adfuupdate.inf

I can be able to load drivers?

Maybe adfuupdate.inf modify the file?

Please Help with thank you in advance

My computer detects the player for 5 seconds then it's gone. I can see in the system tray that it's detected as a usb device but after 5 seconds it disappears. The plater shows only blue screen. Before windows explorer was able to detect it as a mass storage disc but now nada. The player is a MP3/MP4 IPOD knockoff which could play music, videos, radio and games.

[old paint]

I have an MP3 player very simelar to the one displayed. In fact the only difference I notice is on the front. Yours has writing under the screen. I bought it in Sept or Oct of 2007. It hung during a Sync and has been that way since then. The computer does recognise the device but I could not install new firmware. It freezes about half way through the process. Any suggestions? What firmware and software should I be using?

[old paint]

Srdls, what do you mean by a chain?

It sounds like you have a simelar problem but may know a bit more than I do. What UBS device are you talking about, the MP3 player? If so, how did you read the 'chain' from your device? It would be helpful to be able to search for a string inside the inf file to know if it was written for the device. I have looked at the inf file once but I did not understand much other than the file is written in text not machine code.

[raptor791115]

Saludos a todos...mate mi MP4 y siguiendo los pasos de la guia llego hasta que la PC me lo reconoce, pero cuando busco el AdfuUpdate.inf me dice que no tiene informacion del controlador...que puede ser esto...

mi MP4 es un

BRIGMTON de 1GB modelo BPA-1036

les posteo estos otros datos que saque de los chips interiores por si hace falta

hynix kor
HY27UT088G2M
TPCB
746A
MTUJ507403
ATJ2091N

Gracias de antemano