Re: DEAD PLAYER RECOVERY GUIDE
 

Hi! please can you help me with my mp3/mp4 player 512mb?

plate
008A
V3.0

display
FPC4081C-V1

SAMSUNG K9K4G08U0M
ATJ2085H

Please help me....
really appreciated for your great help...

Re: DEAD PLAYER RECOVERY GUIDE
 

Hello!
I've a problem with my MP4 player!
I tired many firmwares, but the player doesn't work.
MY PLAYER:
Anyka 2501
BIOS PMP MLC V2.1.6
2,4" display, 2GB memory, 1,3 MPx camera, FM radio

PLEASE somebody HELP ME!!!!Give me a correct firmware or i dunno...
Thanks.

me too. Any help?

Hey thanks for the guide. Its a great guide and very easy to follow.
However I still have a slight problem. WHen I select the AdufUpdate.inf and click ok i get the message " The specified location does not contain information about your hardware"

If anyone knows how I can get past this step I would greatly appreciate it.

Thank you in advance
Mike

MikeyJay, winer22, and all:
I found lots of information about this same problem (which I am also still encountering) in this thread:

http://www.mympxplayer.org/viewtopic.php?p=45993#45993

please let me know (in that thread), how it works out for you!

Hello I have a problem. I have a dead player wich I tried to "resurrect" as tadad1 !
did in his guide but encountered some problems. When I tried to install the ADFU driver(couldn't find it in the Windows Folder so I installed it from my Mp3 Tools Folder), the device got installed as Actions USB 2.0 (HS) WinUSB Device. Now I'm thinking: is that's a problem, or I should carry on with upgrading the right firmware(I have already tried a few, none of wich seemed to work). Could someone tell me what to do next?

I can't read what it says on the small chipset (only the first letters ATJ, wich doesn't seem to help me that much Neutral ), but the memory chip (hope I'm right) says Samsung and from what I have seen in a list, it's a 4 gb chip. Only id I can get it's a code written in the board: QY-042FV2-STLS-K 2006.12.30
I have used Mp3 Player Utilities 5.09 with fw 3.5.37 and 3.5.35, both ending up with messages like: "Invalid Upgrade Firmware File!" or "Device switching failed, reconnect device please!"

tadad1 and everyone.
i tried this guide on my chinese fake 8gb nano mp3/mp4 player
my chips are :ATJ2091N
Memory chP: Hynix H27UFO82GA
OTHE CHIP :CS3667GF GC208TE3
BOARD: JINBANG 9201
IPOD IS 8 GB (I THINK FAKE BUT NOT SURE) GREEN COLOR 5 BUTTONS ON FRONT AND OFF/OFF SWITCH

ACTUALLY I FORMATED IT AND AFTER POWER ON ITS JUST SHOWING BUSY ICON AND MANY TIMES JUST FLASH SCREEN WITH BUSY ICON
EVEN WINDOW DIDNT RECOGNIZE DRIVER ON CD
WINDOWS XP SAIYNG usb device IN HARDWARE
I TRIED THE STEP U SAID BUT WINDOWS IS NOT ACCEPTING AdfuUpdate.inf I HAVE IN MY CD,
I DOWNLOAD aduf DRIVER FROM DRIVER GUIDE BUT EVEN WINDOW IS NOT TAKING IS AS A DRIVER .
CAN YOU PLEASE HELP ME TO FIND OUT THE PROBELM AND GUIDE ,I WILL BE VERY THANKFULL TO YOU
thanks in advance
DJMAN2008

Re: DEAD PLAYER RECOVERY GUIDE
 

Thanks all for this wonderful site

I have fixed my dec a-660 because of the helpful people.


Im not sure if anyone has the similar problem i had - everytime i tried updating my firmware to fix it in consumerupdate software - i would get a device not found error message.

I have decided to give back to this forum by writing how i fixed it.

It may help some of you possibly.

Instructions at

http://www.mympxplayer.org/viewtopic.php?p=46426#46426


Big thanks to Knob. Uve saved my mp4 player from the illness called the
white screen syndrome hahaha


cheers

Re: DEAD PLAYER RECOVERY GUIDE
 

lol, so unlucky for me.
i didn't find the right firmware, maybe 9.0.43 or 48, and now, i can't see it in window explorer anymore. But before, when i used 9.0.5 or 9.1.xx, i could see the blue screen all time (but now just for a while after turn on ). So now i don't know how to make window have a warn about this for me to install driver, anyone can help me ?
and this is my player info, please help me, too :

Re: DEAD PLAYER RECOVERY GUIDE
 

ok, first sorry for spamming but i have made it work again by trying some more :
http://www.mympxplayer.org/images/in...y_Guide/06.jpg
i still ask for the firmware if some kind friends can help, and now i still try some another firmware with risk