Re: DEAD PLAYER RECOVERY GUIDE
Hy all!
first sorry for my english :oops: so i have dead ipod clone mp4 player flash chip: 2584DCAD Hynix/samsung 512mb such: http://www.mympxplayer.org/image-asp24.html http://kepfeltoltes.hu/080320/usbadf...toltes.hu_.jpg this is ok http://kepfeltoltes.hu/080320/recove...toltes.hu_.jpg this is also ok http://kepfeltoltes.hu/080320/downlo...toltes.hu_.jpg and this is not ok... i wait, wait, wait, and only wait and nothing... what make i wrong??? |
Re: DEAD PLAYER RECOVERY GUIDE
hallow thanks for the guide you provided. i have followed all the steps. but problem with me is i am not having backup of my mp4 player. my mp4 player is detecting on computer as a storage device but i cant use it as a player. can you please provide me a proper firmware??????????? the details of my mp4 player are as follows black in colour 2gb ipod mp4/wma/rec i pod TD-38A there are two ic present samsung 652 k9f2g08udm and another atj2051h the images of my mp4 player are as follows from the front side http://d:/n1/ and from the back side[ img]http://d:/n2/[/img] please help me?????????? |
kingzon M42P !!8Gb!!/4Gb
HI, I've a MP4 Player, brand Kingzon :D .This is dead :( I bought an other MP4 same type, and I want to dump the firmware for my dead player. How can I do it? Witch program is the best for the dump?
http://www.kingzon.de/images/product...a/mp4/M42P.jpg Thanx, steing |
Re: DEAD PLAYER RECOVERY GUIDE
I have a mp4 player that has a small reset button and i used that button to reset it. Afther that i saw that there was nothing on the screen, but it was detected by the copmuter and i upgraded my original firmware from the small cd that comes with the player and it remained blocked at the blue screen with a hourglass :( i don't have any switch to turn it off.
http://i32.tinypic.com/oaw7ih.jpg sorry for my english |
hi
ive got a ipod nano 2nd gen clone could any of you help me on how to fix it cos i dont know how to open it because it has 2 screws at the bottom and i pull of the white bit and i dont know hot to pull out the "whole" board PLZ HELP |
where can i download firmeware
|
hi
ive got a ipod nano 2nd gen clone could any of you help me on how to fix it cos i dont know how to open it because it has 2 screws at the bottom and i pull of the white bit and i dont know hot to pull out the "whole" board PLZ HELP |
Hi everyone
i found a way to open it ive done all the flicking of pins but know its just stuck on a black screen. i can flick1 of the pins and that makes the screen go white but know ive tried heaps of stuff to make it come up on my computer as ADFU but know it doesnt go to hourglass nor ADFU These are all the board numbers HY2UU08G5M TPCB 751A MTUJ7325TQ or o or 0 Other Board AK1025 7K058AB 0KK Tiny Chip TEA5767 CF7955 01 TPGO6262 PLZ HELP |
Hi everyone
i flashed the pins but know it comes up as a unkown usb device PLZ HELP THANKS |
Hi Guys
the battery broke off so now i dont know where to connect the wires and how Any help is appreciated Thanks |
| All times are GMT -7. The time now is 5:52 pm. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.0 RC 2