moneybankz,can you post some detailed photos of your board?

Take a look on my pictures in:

http://www.4shared.com/dir/6529164/7...8/sharing.html

You can upload then in this url!

Hi Guerra

i uploaded it it should be
DSC00702.JPG
DSC00709.JPG
DSC00712.JPG

or something like that

Thanks for replying much appreciated
(not my type of language but didnt know another word for it)

It looks like a Zarva ZX series!
So,next step,write here informs about your player.

Chip:
Display:
Board number

rectangle Chip:HY27UU08AG5M
TPCB 751A
MTUJ7325TQ or 0 or o
square Chip: AK1025
7K058AB 0KK
Display: JYD2008-01-08
Board number

thanks for helping

Re: DEAD PLAYER RECOVERY GUIDE
 

Can you post a more detailed picture of this portion of your player like this photo....

http://img90.imageshack.us/img90/892...0004ft5.th.jpg


I'd like to take a closest look of your board,to see where the wires +- will be placed(please)!

Hi Guerra

DSC00738.JPG

thanks

As I see in your picture we have two big points(it's were tha wires should be connected).
Do you have some knowledge to do this?
Mean use of a solder machine?

yeah but my soldering iron is really hot and will burn the circuits

The circuit is enough stronge to hold the heat of soldering iron,yeah some times if the soldering iron is too hot and your hand thrills while soldering on the board then it may be the chance that the connecting prints may came out from the board but mostly no matter how hot the soldering iron is it can't destroy the circuit

Re: DEAD PLAYER RECOVERY GUIDE
 

Hello ,

I thought to upgrade my firmware because my mp4 player wasn't working anymore (from day 1!)
It seems i did a wrong firmware in it , and now it's locked!
I Can only turn him off by pushing the reset button (you know , in the hole).

I only could recognize the mp4 player as rockusb device ONCE , that's why the ugrade worked.
But it seems it is the wrong firmware.

Windows XP is installing a device driver by default ' mass storage driver' or something , but the only way we can do a firmware is trough the "rockusb" driver (downloaded here btw).

So , I know i can upgrade the firmware , but first my computer must recognise the device as a "rockusb" device , and not as "Rock mp3 device" (or something like that).

BTW : I can upload songs to it , and so on , the device is working , but it seems that the upgrade software only works trough the "rockusb" driver.

Can somebody help me out ?
I'm talking about this player ...

[web:fa264a3c34]http://www.ycibo.com/item/IT/MP4/touch_4G/touch_06.jpg[/web:fa264a3c34]

I'm about to try the HARD WAY , but then again , I don't understand wich chip I must take ???
The Rockchip rk2608a, 2 Samsung 804 chips (I think 1 for sd card ) or the nanya chip ???
Many thanks, Kuoi

Edit :
I just tried it out and guess what !!!
It worked well , and within a minute.
I took the right chip (Samsung) immediatly.
Not working very well for the moment , but I guess I just have to find a good Firmware now.

THANKS , Kuoi