Re: DEAD PLAYER RECOVERY GUIDE
 

Search for this: PG5 Rockchip Upgrade 0310.zip

On this page: LINK

ill try to solder it but im not sure because it might fry it.

ill keep you updated.

thanks

this went worse.
Took me another hour to get it back where I'm now, at the start .
I'm about to trow it in the bin, and could NEVER listened to it , can you imagine ?

It took me 2 long days to get it back with the problems from the start.

Can anybody tell me what folders must be on the drive , because I have the feeling it misses 'something' there.

I saw a folder "FM" and "VIDEO" if I'm correct.
Can somebody tell me what else ... and if files , please send me ?

Kuoi

EDIT : Solved by formatting the drive again. :lol:

i soldered the battery back on but im stuck where i was before where it says specifeide location doesnt contain information thing and i uninstalled the drive

thanks for helping put the battery back on

i got it into adfu mode this what your inf thing shoul look like or make one up like this:
[Version]
Signature="$CHICAGO$"
Class=USB
;ClassGUID=1181f4a0-f284-11d2-9068-00609797ea5a}
provider=%MSFT%
DriverVer=08/20/2004,2.0.0.0
LayoutFile=layout.inf

[Manufacturer]
%MfgName%=Upgrade

[Upgrade]
%USB\VID_10D6&PID_1160.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_8888
%USB\VID_10D6&PID_1160.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_ff51
%USB\VID_10D6&PID_1160.DeviceDesc%=MDisk.install,U SB\VID_10D6&PID_ff66

;[PreCopySection]
;HKR,,NoSetupUI,,1

[DestinationDirs]
umss.files = 10,System32\Drivers

[MDisk.install]
CopyFiles=umss.files
AddReg=umss.addreg

[MDisk.install.NT]
CopyFiles=umss.files
AddReg=umss.addreg

[MDisk.install.NT.Services]
Addservice = AdfuUd, 0x00000002, AdfuUd_AddService

[AdfuUd_AddService]
DisplayName = %USB\VID_10D6&PID_1160.DeviceDesc%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %10%\System32\Drivers\AdfuUd.sys
LoadOrderGroup = Base

[umss.addreg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,AdfuUd.SYS

[umss.files]
AdfuUd.sys

[SourceDisksNames]
1000 = "USB Mass Storage Device",,,

[SourceDisksFiles]
AdfuUd.SYS = 1000

;---------------------------------------------------------------;

[Strings]
MSFT="MP3 Player"
MfgName="MP3 Player"
USB\VID_10D6&PID_1160.DeviceDesc="USB 2.0 (FS) ADFU Device"

Re: DEAD PLAYER RECOVERY GUIDE
 

glad to hear you budy! :) and how could you format it???? At may drive it has two partition, and none of them could be formatted! :(

what was wrong with that firmware I suggested to you?

thanks!

what firmware if you have it for my player can you give it to me cos all i need to do is flash the firmware and its fixed

2nd gen ipod clon 128*128

thanks

If you see the 2 drives in Explorer , just right-click on them at the left , and then you should see "format".
Hope this works for you.
But if you see them , I think it must.

About the firmware ...
I tried your firmware , but as I see it was about the same as 1 I've tried too.
The player goes on "LOCK" as soon as it is started , and you can only turn it off by the "reset" button.
It seems it is not compatible with my clone.

Greetings and many thanks, Kuoi

oh sorry i thought you guys was talking to me

You should go here: http://www.mympxplayer.org/dead-play...ide-vt567.html

This is a step by step tuto!

Read twice before do something!