[solved]DEAD PLAYER 1GB NANO clone
 

my cpu number is ATJ2085W !!! i hope someone got the firmware for it. it's an clone from sumo. the display size is 1.5" inch. but i dont know the board number. the flashchip is 1gb from samsung...

Re: DEAD PLAYER 1GB NANO clone
 

i found the right boardnumber: SRX-A7 Main v1.1 2005-12-09

klappi, Is your player dead? If so try following the DEAD PLAYER RECOVERY GUIDE

Re: DEAD PLAYER 1GB NANO clone
 

i already recovered it! but it has a blue screen, it plays mp3 and everthing works except the srceen... so now im searching for a firmware for my board...

klappi, tell me a bit about your firmware.
What version was it?
What features does it have (Games etc.)?
What menu images?
Maybe I can give you a hand tracking down possible firmware for your player.

Re: DEAD PLAYER 1GB NANO clone
 

it was version 3.5.37
no games

music
radio
video (amv)
pics
ebook
settings

i think thats were all menu points...

klappi, It seems someone may have uploaded a firmware for you. You will be able to download it as soon as Admin have approved it.

Re: DEAD PLAYER 1GB NANO clone
 

if it helps there you can see the menu and so on 1gb nano clone

Re: DEAD PLAYER 1GB NANO clone
 

if you found the right firmware tell me too, it may help me too

klappi & phantomddl, Here is another full version firmware that I have had good results with. I have modified it so that it should recover your player with a single flash while in recovery mode. Let me know if it helps.

You can download it HERE

Re: DEAD PLAYER 1GB NANO clone
 

I have the same player pictured here, and it did recover my player. But, I don't have any menus, and I only have a blue screen when it turns on. Please help!

You could try this original firmware

http://www.mympxplayer.com/dload.php...le&file_id=201

Re: DEAD PLAYER 1GB NANO clone
 

Thanks, I tried it, but I still get invalid upgrade firmware file. Any other ideas? I know now that I really should have backed up my original! Aarrgghh!

Re: DEAD PLAYER 1GB NANO clone
 

Hello admin,
I followed as you'd said in Recovery of dead player & it worked in the sense that the dead mp4 was detected by my computer. The screen displays black mixed with blue on the screen but now I need the right firmware. I have a similar MP4 but I don't know how to extract the firmware and keep a backup. Which software is required for that? The firmware that I need
is 3.2.16 ACTS16D_16_SZG (3.2.16.bin) Where do I get it? Is it present in the website? Which other closer firmware is acceptable for my MP4? Plz help me....
Regards
Sachit
sachitmaskey@gmail.com

sachitmaskey,
Please start a new post rather than add to an existing post.

Re: DEAD PLAYER 1GB NANO clone
 

i solved the problem ... i bought exactly the same player on ebay and extracted the firmware... i will upload my firmware hopefully it will help someone... :)