I think that I don't find the right firmware!

bianchidavide · #1 (**permalink**) 11th Jul 2006, 1:31 am

Hi all!! I have an IPod nano clone 2Gb 1.5". My old firmware SC85051B ACT_V3.5.35 2006/03/17. I Update with a wrong firmware and now my player dead. I use the "DEAD PLAYER RECOVERY GUIDE" and arrive to "Now is recover state, and select the firmware file for recovering please!". When i try to put a new firmware with the "MP3 Player Upgrade tool" and push "Recover Firmware"
appear the error: " Unknown flash type!" and the display turn on blue screan! :cry: If i turn off the player and i turn on the display is black.
I try with all fimware that there are in this forum.
I don't find the right firmware! And i don't view in "my computer" the device

Please help!

Sorry for my english

ops:

tadad1 · #2 (**permalink**) 11th Jul 2006, 2:08 am

bianchidavide, What version of MP3 Player Utilities are you using?
When in recovery mode are you flashing with a Full Version Firmware or a dump.bin?

bianchidavide · #3 (**permalink**) 11th Jul 2006, 2:54 am

Tadat1, I use the 3.68 and i try with MP3 "Player Product Tools 4.19" also.
I flashing with a Full Version Firmware and a dump.bin

triscotto · #4 (**permalink**) 23rd Jul 2006, 7:48 am

sei riuscito a risolvere?
sono anche io nella tua stessa situazione...

tadad1 · #5 (**permalink**) 23rd Jul 2006, 7:58 am

bianchidavide, Have you been able to flash any firmware to it since it has been in recovery state?

bianchidavide · #6 (**permalink**) 25th Jul 2006, 7:58 am

tadad1, When i put the player in recovery state i put the firmware and the player start in blue screen but in the second step, when i try to put the full firmware, i started the upgrade tool and my player turn off and automatly turn on with this error: "Device switching failed, reconnect device please!"

Help please!

Another question: If in the first step i put one full firmware, my player start correctly or is necessary two step?

tadad1 · #7 (**permalink**) 25th Jul 2006, 8:30 am

bianchidavide,
So I understand,
You say "When i put the player in recovery state i put the firmware and the player start in blue screen" What firmware are you using here?
And then "but in the second step, when i try to put the full firmware, i started the upgrade tool and my player turn off and automatly turn on with this error: "Device switching failed, reconnect device please!"
" What firmware are you using here?
Can you give me links to the firmware you are using?

bianchidavide · #8 (**permalink**) 26th Jul 2006, 3:08 am

tadad1 , first of all thanks for your patience.
In the fist step i use this:
http://www.mympxplayer.com/dload.php...le&file_id=225

For the second step i try with all the firmware that there are in this page:
http://www.mympxplayer.com/dload.php...gory&cat_id=15

For the fist step i try with other full firmware also, but nothing is changed

tadad1 · #9 (**permalink**) 26th Jul 2006, 3:21 am

bianchidavide,
That is ok my friend I hope we can get your player working again.
When you install the first firmware what happens to your player?

bianchidavide · #10 (**permalink**) 26th Jul 2006, 3:43 am

tadad1, Thanks.
Appear the blue screen :cry: