(solved)mp4 ipod clone 1gb black china

djkasak · #1 (**permalink**) 11th Jul 2006, 6:03 am

HI. i have MP4/mp3 player black Ipod clone GM nano 1.5 screen 1 GB memory, it have a radio,diktafon,mp3,amv,e-book,game (tetris),menu was FLOWERS ! :roll:

so my player waz ded beacose i dsconect it from computer just unplug it (wrong i now)
i use Firmware Upgrade Tool 4.19, with 3.5.37v2.1b FM.fw <---i think its full.
but screen turns black,then yelow,black stripes (it is working like hard drive now), halp to recover back to normal,
HERE is what i done so far (am i misteken >?)
1)i dawnload tools Firmware Upgrade Tool 4.19,and some full firmwere (thet maches my player)
2)i torn on player and connect it to PC via USB 2.0
3)i format it fat 32
4)upload firm full 3.5.37v2.1b FM.fw (and other firms like this,for example V.25 or t18)
5) when passes (not every time) i siconnect player from PC (just un plug)
6) weithing abot one minute , and torn on player it shows black screen,
7) i connect player to PC, and upload some dump file
8) agen diskonnect and apears only black and yelow screen
------- I use ded player recovery guide (but i dont open my player,no need, and I dont understand why I must open it...)
---------------------------------------------------------------------------------
Halpe please I dont remever my firm (maybee v 35 wilson..)
i dont have CD with original soft.

what iv done wrong or what i didnt doo ?
(sorry four bad english )

tadad1 · #2 (**permalink**) 11th Jul 2006, 6:09 am

djkasak, You have done nothing wrong, you have just not found the correct firmware for your player. You must keep trying different ones until you find one that works.

djkasak · #3 (**permalink**) 12th Jul 2006, 12:52 pm

ok. thx. mister admin one more Q...

how to find out my firm? is there any spacific? like full firm must bee for example v 37 wilson... and dump file must bin from similar pleyer write?

and if i want to instal new firm i just need to format my player then torn of and on then just instal full firm.. ? and ofcorse dump file after ...

after hard work.. ah... not working i just use tools to upload full firm tadat1 or something like this for my player, it is now black screen, and then what to do? full firm is instalet now black screen... what to upload next?

have : 1 gb ipodclone GM nano black, china, headfon is rigth,usb is down, 1.5 screen mp4,mp3 + radio, menu was start with blue flowers and menu was LIST down like :
Music
Amv and here was picture of title
rec
fm
pict
e-book
game (tetris only)
and conf...

please halp i will own you beer

realy good peaple you are

P.S. edit my player looks like : httpwww.mympxplayer.comalbum_showpage.phppic_id=35 NUT only black and buttns are black !!!

and menu looks like on this one : httpwww.mympxplayer.comalbum_showpage.phppic_id=62

Please help... im going crazy

here is foto

[img][img=http://img206.imageshack.us/img206/830/13070608586ie.th.jpg][/img]

tadad1 · #4 (**permalink**) 12th Jul 2006, 5:28 pm

djkasak,
There is no way of knowing what version firmware your player used as you have flashed it and it is gone.
I suggest you go to the Firmware Download section HERE and download all recent firmware uploads.
Using s1res HERE open each of the .bin files you downloaded and find all the ones that have the same menu images, boot and shutdown images that your player had, these are your best bet at finding a suitable dump file.
If you have followed the DEAD PLAYER RECOVERY GUIDE and taken your player to Recovery Mode, then updated with one of the full firmware then you can start uploading the firmware you have checked with s1res.
If none of them work then try a different full version firmware and then try the dump files again.
If you kill your player doing this you need to put you player into recovery mode again by shorting the chip.

Some of the firmware that has been uploaded to site have not been repaired so it is a good idea to put them into s1fwx folder rename them dump.bin and run repair.bat before trying them otherwise they will give you an error message.

Do not try and repair the full version firmware or you will destroy them.

djkasak · #5 (**permalink**) 12th Jul 2006, 11:17 pm

ok. i try to do thet agein. i uploadet in previous post my image with current status... now its black agein. thx ! u are doing realy good job !

ok. edit

i looked four firm, and dump

i found right dump file (thet looked almost like mine...)
but im still looking four firm file

i cant find right, one is damaged, second dont look like mine... demn now i have blakc,jelow screen agen... i thing i mistrake somwhere. i use only Firmware Upgrade Tool 4.19 and upload firm file, then after disconecting and connecting i upload with same tool dump file. maby i must upload with something else?

now tools cant upload, it shows mee error

0 passed dawnload it tells...
demn something strange, and windows sometimes arent regonizeing player, but after reeboot it found it agein...

i thing im stupid

ok. i surender !! i will go to shop where i bot it and repeir it four warrianty

and then i will beck up my firm

thx for helping me out, next time i will bee smarter

Gordon · #6 (**permalink**) 16th Jul 2006, 4:38 pm

This sounds a little like what my problem was; I think I may have unplugged my player while still connected...

Djkasak, when you unplugged your player, did it stop working meaning you can never turn it on anymore? Could it still turn on? Mine will not turn on at all. I have contacted seller, no response yet. THanks,

Gordon

djkasak · #7 (**permalink**) 19th Jul 2006, 10:19 am

i couldnt torn on, but somehow my PC detect mp4 as UDF server... and i was able to install firm, but unfortunatly firm was not right,

so i repair my player (in shop) and sell it

now i will have another good player