updated with wrong firmware and now it won't turn on
 

hi guys.. m new hir.. iw ould like to seek for help for my mp4 player, i think i have updated it with a wrong firmware and now it won,t turn on even my pc cant detect it.. sir... are there any remedy for this? my specs are: mp3, amv video, its a 512mb. with two built in speakers at the bottom sides. this is the site that looks like my mp4. http://www.pinoygearph.com/store/fil...0%5B1%5D_m.jpg
thanks guys...

chris, If the PC is not detecting your player then you will need to follow the DEAD PLAYER RECOVERY GUIDE HERE

sir are all players applicable to this guide.. i do ask 1 more thing.. is the tweezers or the metal material somewhat a purpose for shorting 2 pins or likely to be a jumper? thanks sir...

chris, This process works on most if not all players. There are no jumpers on the players and the tweezers are just to create a short circuit between pins on the memory chip which seems to reset the chip and put the player into recovery mode where you can then upload a full version firmware followed by your backup dump.

ahhh... muchas gracias...

sir i havent recovered my mp4 still. i have tried to short all the pins in the same chip as showed in the guide.. the only thing i have noticed was that.. there are 2 pins when you will short that, the speakers will hizz, other is that my usb light will dimm.. sir, do you have the exact pin to short it? and i really appreciate your site.. thanks..

chris, It seems to work for me on any pins left side, right side even across from side to side. I usually just open the tweezers about 10mm and drag it along 1 side of the chip connecting multiple pins and it always seems to work.