after upgrade only blue screen

foxone · #1 (**permalink**) 8th Aug 2006, 4:21 am

hello,

this is my player

my problem is, after the upgrade the screen is only blue.
i can hear music if i put the menu button and than the play button.

the player:
ATJ2085W
F5169AB 55T

SAMSUNG 616
K9K8G08UDA
PCB0
FUC547P8

it's look how like ipod nano
1GB

Someone can say which I make must thereby screen again functioned.

ask step by step please

foxone · #2 (**permalink**) 8th Aug 2006, 6:23 am

The board is:

MP-693C-SL
MAIN V1.3
2005.12.14

tadad1 · #3 (**permalink**) 8th Aug 2006, 6:59 am

foxone, The firmware you have used is not suited to your player. If you do not have a backup of your original firmware you are going to have to try some of the ones in the download section till you find one that works with your player.

If you player stops being recognised by the upgrade tool you are going to have to follow the DEAD PLAYER RECOVERY GUIDE to reset your chip and continue trying firmware.

You will find a couple of firmware that may suit your board HERE Even with all the information you have given on your player it is not possible to tell you any particular firmware that will recover your player as there are so many variations know.

If you know your original firmware version they are the ones you should try first, using s1res to open the firmware will help you find ones that have the same boot, shutdown and menu images as your original.

foxone · #4 (**permalink**) 8th Aug 2006, 7:08 am

ok i must download a firmware
start mp3 player upgrade tool
select the firmware
and say begin

that is the complete procedure??

so often repeat to one functioned

foxone · #5 (**permalink**) 8th Aug 2006, 9:07 am

I all out now under http://www.mympxplayer.com/dload.php...gory&cat_id=15 tried.

always blue screen

What can I do???

foxone · #6 (**permalink**) 8th Aug 2006, 9:50 am

I buy the player at ebay by pumavandi

Someone can say which I make must thereby screen again functioned???????

mastermoon76 · #7 (**permalink**) 8th Aug 2006, 1:07 pm

hi foxone
try to do the same i do...
send a message via ebay at the other buyers that haved buyed the same of your mpx e tell him if can send u a dump... i'm solving the same problem in this way... 8) 8) 8)

PS it's hard to find someone that are smart so u have to guide him in dumping procedure... u can find it searching the forum.. i don't remember where is it...
sorry for my English but i'm not English... (i'm only World Cup 2006 CHAMPION!!!!!!!) :twisted: :twisted: :twisted: :twisted: :twisted: :twisted:

foxone · #8 (**permalink**) 8th Aug 2006, 3:22 pm

how does one make a dump?

tadad1 · #9 (**permalink**) 8th Aug 2006, 4:54 pm

foxone, There is a guide in the Knowledge Base HERE