My dead mp3/mp4 player

geni · #11 (**permalink**) 9th Nov 2006, 2:02 am

could u show me the pin of player of Wowland?my player is similar to his.I cant' dectect anh don't know which is pin.thanks

geni · #12 (**permalink**) 9th Nov 2006, 2:06 am

sorry,im so stupid.i realize that in fact i can't dectec the chip of my player.

geni · #13 (**permalink**) 9th Nov 2006, 2:10 am

here is pic :http://h1.ripway.com/geni/player.JPG

sorry it's so dim

Groovy · #14 (**permalink**) 9th Nov 2006, 5:59 am

I don t understand what you need then...

geni · #15 (**permalink**) 9th Nov 2006, 10:01 pm

i don't know which is the chip.I observed and don't see any thing like pin on it!here is hte pic:http://h1.ripway.com/geni/h.JPG

geni · #16 (**permalink**) 9th Nov 2006, 10:45 pm

i'tried but my player can't get adfu mode.It hasn't any signal!

Groovy · #17 (**permalink**) 11th Nov 2006, 7:39 am

Man look on the picture in the DEAD PLAYER RECOVERY GUIDE...
Then try connecting the pins with many things... ( knife etc..), but be carefull !!!!!! DO not destroy it !
And you have to try it longer... it takes sometimes to 2 minutes of trying to get the Adfu... and you have to have it connected in udb and turned on !

Wowland · #18 (**permalink**) 26th Nov 2006, 8:31 pm

Groovy, friend, you right, my chip has # APN 2085
So, I've tried to load all f/w placed on this site (e.g. "3.5.37v2.1b FM.fw", "Full3.5.35", "3.2.13_FM" and so on...).
And when I try to load it is "Flash error"...
As I understand, there is only one way 4 me. This way is to connect the pins again. Isn't so?
How could I know what version of firmware is suitable for my mp3 player???

Thx in advance.

lattesurf · #19 (**permalink**) 26th Nov 2006, 8:35 pm

Wowland , you might want to try using different versions of MP3 Utilities to flash the player instead as suggested by nickyblast Here.
Hopefully it solves the flash error problem.

Wowland · #20 (**permalink**) 26th Nov 2006, 8:57 pm

Thank you, friend.
I'll try 4.05 tools.