FW for nano clone with 1.65" display

ari · #1 (**permalink**) 4th Oct 2006, 7:36 am

Hi guis,

My mp4 player crashed so I decided to flash a new firmware. Already tried every file in your download section, with all related to nano cloned I only get a blue display. The player works, I managed to hear some music once, but as you can see in the picture I don't have that standard display with 1.5" or 1.8" but I measured 1.65" So if anyone of you has such a player or the firmware, it would be very nice to send me the firmware

ari

lattesurf · #2 (**permalink**) 4th Oct 2006, 9:02 am

ari, couldn't see the picture of your player, but anyway your player is a 1.5" screen. The 1.5" is the measured displayable screen, not the transparent screen on the cover which is about 1.65".

Would be more helpful if you could provide more details of your player (board number, processor number, etc), so that someone with a similar player is able to send or give you a link to their firmware.

Good luck.

admin · #3 (**permalink**) 4th Oct 2006, 11:28 am

ari

Can you tell me the procedure you used to get your player to a working state please?

You might also need to FORMAT your player straight after flashing it with a full firmware. Or you may have to format it again after flashing it with a second firmware.

ari · #4 (**permalink**) 4th Oct 2006, 11:41 am

Hi you two,

first, sry for the broken link and the missing board number. I corected the link, so now you can see that it's really 42mm which is 1.65"

board number:
mp-752c-sl main v1.1 knife 051207 (<- what's that?, and why the hell is paper inside the player?)

I got it playing (the display stillt doesn't work) with different firmwares, using the shipped software, but only by pressing the keys by random

thank you,
ari

ari · #5 (**permalink**) 5th Oct 2006, 11:33 am

hi guys.

I think I was shammed. the player should have 4gb flash, it has only one memory chip. the chip itself is a SAMSUNG K9K8G0; which has 1GByte capacity according to this page *click*. So I'm going to give it back. OK I can't understand a word russian but I think the 1gb is correct, isn't it? anyway thx for your help
ari

p.s.: the dealer says that it has a 1.8" display lol

tadad1 · #6 (**permalink**) 5th Oct 2006, 2:27 pm

ari, Yes you are right it is a 1GB chip which is possibly why your player crashed in the first place, looking at the picture it is a 1.8 screen. get on to the seller and and give him heaps.