[solved] Looking for firmware ATJ2051H
 

Hey guys pls help me... I ve got 2 days old 4GB Mp4 and I fu*ked it up...
I have no backups.... :cry:

I ve read those manuals how to recover it...
I did it excactly as you said but at the end ehdn I upload there a new full firmware it does nothing and when I turn it again it sais again that I ve no firmware...
I guess I have bad firmware...

So I have here some photos... if someone have the same or know what it is for a type pls write me...
I ssearched for that number inside but there is no number on that board :shock: :shock: :x :x

pls help me out....
http://stuff.hu.cz/out/P1010468.JPG
http://stuff.hu.cz/out/P1010469.JPG
http://stuff.hu.cz/out/P1010471.JPG
http://stuff.hu.cz/out/P1010472.JPG

Groovy

Does your player get detected by Windows as a drive?

Also, what firmware have you tried? If your player is in recovery mode, it's best you use a full firmware. You can find a lot of full firmwares from the "Downloads" --> "firmware" --> "Full Firmware" section. Unfortunately as you don't have a backup, you will have to keep trying until you find a firmware that is compatible with your player.

Groovy, If when you start the upgrade utility you get a message that your player is in recovery mode you need to use a full version firmware, it most likely will not recover your player but it will prepare it so that you can then try backups or dump.bin files.
Then you just need to go through and try all the firmware you can find until you find one that suites your player.
If your player stops being recognised then you need to follow the Dead Player recovery Guide to do a hard reset, load a full version firmware again then continue trying dumps.

Just looking at your photo's your hacked player is really only a 2GB, the memory chip K9WAG08U1A (16GigaBit) = 2GB.

Hah But I put there 4GB ;)

:arrow: I tried all your full firmware and it does make the same all the time...
Noe thw windows do not recognise the player so I will follow the manual again... :(

Groovy, After you load a full firmware are you able to load dump files?

No I said... If I turn on that prograam agaion it says recovery mode again

I cannot iinstall the full firm,... dunno why :(
After I made the conection between pins it makes - b--bi and it is that -adfu device... I am tring to put there all full firmwares I found but if I upload it... it makes the same... and aain recovery mode and sometimes it writes - Device wasn t recognised and I have to open it again and it wirks then...

HEY I found that ID number :)) so I downloaded that firm... it is : ATJ2051H

But still if I run it it is recovery and if i open any firmware it writes version 3.2.21 or smthng like that and producer : Wilson... it does it for all the Firmwares... Shit happens ;)

Re: New Mp4 dead
 

Hi Groovy

been looking for same firmware check out my thread titled Firmware for NANO clone ATJ2051, samsung 634 2gb

If you find firmware that works please let me know

I think more and more members will be looking for the same firmware as this guy is selling about 30 of these a day on EBAY

Coisty

Re: New Mp4 dead
 

I found some... there are many of them on s1. http://www.s1mp3.org/en/downloads_fw.php

but I have bigger problem with that I worte last time... any1 knows pls ?

Re: New Mp4 dead
 

Which one on that site works???

I have tried loads and none work with my player

Thanks coisty

Re: New Mp4 dead
 

I need someone to help me with my problem first.. then I can tell you what works.. now I can nothing

Re: New Mp4 dead
 

I have some idia! Wrote tomorrow. :?

HEY GUYS I really need you to help me out... !!!
Can you tell me why it says recovery mode every time I put there a firmware ?
And why it is alwayes showing that I upload the same firmware if it is absolutely not true ???

pls I need it !!

Groovy, Sometimes the upgrade utility gets hung up, try uninstalling Mp3 Player utilities and then reinstall a different version then connect your player to a different USB port.

Re: New Mp4 dead
 

Try this.
-Download this http://webserver.sanet.ge/knight/Mp4...iskUpdate4.rar
-Run it
-Wait...
-Show path to you firware
-Recover
-Run Mp3 upgrade tool
-Show path to you firware
-Upgrade
Is everything is ok? :wink:

Thx to you both... I will try it as soon as I get back from swimming I am just coming to... :)
hope hope it will get better

I have the blue screen :)))

Guys... When I have the blue screen and I want ti upload the dump... the Rdisk upd says "Unknow flash error"...
I tried to re-install Rdisk but it still does the same.

Groovy, Try formatting the player before you upload the dump.

That is the problem... How can i format it if i cannot see it in exlorer ???
That s nonsence... I was looking for that but it is not possible I guess...

Re: New Mp4 dead & UNKNOWN FLASH ERROR
 

Groovy, now you are close to fixing your player can you please now send me a copy of your firmware, I have the same player and can't find a copy anywhere.

Brian
brianwo@dsl.pipex.com

Groovy, At the moment what happens when you try to load a full version firmware?

tadad, you still do not understand ? I found only one working full firmware what make my display blue...
But now If i try to upload another (full or dump - same) it says " recovery mode" and for all firmwares it say "unknown flash error". I searched the internet and this is quite common problem but I haven t found any solutiion. !

ok ok sory but i have to this problem
to
http://img79.imageshack.us/img79/239/popdci6.jpg

*my mp4 is fake "ipod"

ipod pic
ipo pic2

why you send it to my topic omg ? I want to solve it quickly... :roll: :roll:

del this spem

start your own topic you sucker,,, :shock: :shock:

HEY !!!! I know my mistake i did... I had full firm even if it did the blue screen...
Now it is detedcted in explorer, I can detect it and I formated it for 1.90 GB :P... Well ok... Now I ve just tried all dumps on this page.. I am gonna continue ;)

Groovy, I was just reading back in your post and you mentioned that your player has an ATJ2051 chipset, this may be a problem for you because most of these players use the ATJ2085 chipset so finding the right firmware is not going to be easy. I do not think we have any firmware for this model chip in the download section.
The ATJ2051 was generally used on pen drive mp3 players with small liquid crystal display.

[solved] Mp4 dead & Looking for firmware ATJ2051H
 

Hm... I belive myself... I wiLL find it for you all !!! :) :) :)
But today I end... I downloaded and tried 185 formwares... And I have 2 Full firms what does WORK !!! but dumps which are near to mine does only black light and when you press a button it goes off... Well cross your fingers... I will continue someime.. tomorow I have to learn to school... We are going to write tests from almost everything. :( :( :shock: :shock:

cYa DuDeS And thx tadad

Groovy, Good luck in your tests :) and I will keep searching for a firmware for you.

Re: New Mp4 dead & UNKNOWN FLASH ERROR
 

Groovy, if you have found 2 firmwares that work with the ATJ2051 chip then can you PLEASE send them to me or let me know where you got them.
This will help YOU as well as me and I will be able to confirm to you that they DO or DO NOT work.

Thanks Coisty

Re: New Mp4 dead & UNKNOWN FLASH ERROR
 

They are in download section !!! it is some file called T-18

I ve tested 80 files today... and now I have no idea where to get my firmware from Sad
PLS nay1 who have nano fake make a dump for me I would test if it works and if it does I will do what you want... If you need any help or wnat money Very Happy

EDITED: Sorry for this message, I didn't realized that this problem was allready resolved xD I'm a bit tired :P

Try with other MP3 Player Utilities version as tadad1 said, it might work..

The same happened to me once (the player wouldn't upgrade from the last firmware I installed [it was a corrupted one])
I was desperate.. but when I installed another version of the program the player updated without problems!

EDITED: Sorry for this message, I didn't realized that this problem was allready resolved xD I'm a bit tired :P

Re: Mp4 dead & Looking for firmware ATJ2051H
 

I have copy of my firmware ipod nano clon. Its plays AMV video. 1,5 " LSD. If you want - i give link. :roll:

Re: Mp4 dead & Looking for firmware ATJ2051H
 

Hi Kivin,

a link to your firmware would be great so we can at least try it.
The player I bought with the AJT2051 chip was from EBAY member mp3_exp.
This was a 1.5" screen nano clone sold as 4GB but was really 2GB.

Coisty

Re: Mp4 dead & Looking for firmware ATJ2051H
 

yes pls....

HEY GUYS !!!! I have recovered my player :) :) :)
Thx to "lyricmoods" and his dump firmware :
http://www.mympxplayer.org/firmware-...ltd-df392.html

Thank you all

I have only one bad problem :D I plucked the thin wires going from the baterry... But I know a good serive where I hope the will put it back there :)

GUYS :))) Don t worry I will stay on this page helping everyone I could help :)