Sudenly it dont work anymore

ayhack · #1 (**permalink**) 3rd Nov 2006, 7:19 am

I have bought an ipod nano clone(see viedeo(33sek))

http://rapidshare.com/files/1819817/lol.avi.html

i used it 2 days and suddenly i cant turn it on anymore

if i turn it on the screen stay black and i cant hear nothing but then if i connect the nano with my pc i get the massage: new hardware found

but the driver on does work but later @ the instalation the setup say:

or something like that and it canchels...

plz help me

Groovy · #2 (**permalink**) 3rd Nov 2006, 11:08 am

click right mouse button on "EXPLORER" and press HARDWARE. Then there choose wirds and set it as not needed..

tadad1 · #3 (**permalink**) 3rd Nov 2006, 3:55 pm

ayhack, If your player is being recognised as an ADFU Device it is in recovery mode. The only way you will be able to restore it is to load a full version firmware and then your backup firmware. If you do not have a backup then you will just have to download some firmware and try them. Hopfully you will find one that is compatible with your layer.

Have a read of the Dead Player Recovery Guide
http://www.mympxplayer.org/dead-play...ide-vt567.html

You do not have to follow the section about shorting your chip because your player is already in recovery mode but you will need to use a full and dump firmware to recover your player.

ayhack · #4 (**permalink**) 5th Nov 2006, 12:46 am

thx 4 ur answers...

i choosed the adfu driver from the driver cd and from the windows directory but everytime i get this error:

tadad1 · #5 (**permalink**) 5th Nov 2006, 1:10 am

ayhack, You need to turn off Driver Signing. Right click on My Computer and select Properties. Go to the Hardware tab and press the Driver Signing button and select Ignore and set as default. You should now be able to install the driver.

ayhack · #6 (**permalink**) 5th Nov 2006, 1:59 am

big thx driver is installed now but i have no icon here:

If i start the upgrade tool and choose the firmware my nano clone lights on for a few secounds and the screen is black again and the update tool gives me following error:

tadad1 · #7 (**permalink**) 5th Nov 2006, 2:12 am

ayhack, If the player is in recovery mode (ADFU Device) there will be no icon in explorer.
Are you installing a full version firmware? While in recovery mode the player will only accept a full version firmware. You will find some in the firmware download section.
Once you have loaded a full version firmware your player should become visible in explorer then you can start loading regular dump files to try to recover your player.

ayhack · #8 (**permalink**) 5th Nov 2006, 5:45 am

i tryed all of the fullfirmware

like this one: http://www.mympxplayer.org/hy875cfw-firmware-df324.html

the setup goes more far then the first time and then i get this error:

Groovy · #9 (**permalink**) 5th Nov 2006, 9:08 am

Your uttility seem fucked up... it does the same version all the time... try installing other version of it !

Groovy · #10 (**permalink**) 5th Nov 2006, 9:09 am

be patient you have to try many of firmwares ! you have to read your chip number