MyMPx.org

MyMPx.org (http://mympx.org/forum/)
-   Dead Players (http://mympx.org/forum/dead-players/)
-   -   Some 9.0.48 Downloads (http://mympx.org/forum/dead-players/35435-some-9-0-48-downloads.html)

tadad1 16th Dec 2006 1:40 am

Some 9.0.48 Downloads
 
Full 9.0.48 For 1.8 LCD

http://uploaded.to/?id=2dc531
http://uploaded.to/?id=812df7
http://www.sendspace.com/file/jcgtvt

Full 9.0.48 For 1.5 LCD

http://uploaded.to/?id=55a573

I have sourced these from various Chinese web sites and have no info on what players they are from. Do not try to use them to upgrade a working player use only to try and recover a dead player.

kravelick 29th Dec 2006 4:39 pm

Re: Some 9.0.48 Downloads
 
:) hi, this is a partial succes story ,i had a totally dead mp4 from ebay,china,(upgraded it with wrong firmware and never made a backup),anyway i have the new atjxxx chip so its been a problem getting it even to be recognised as a flash disk,but i finally did it after 3 days of looking and trying different fw.my chip is atj2093h it should be 4 gig but is only 2 gig. i installed firmware tool 4.07(from this site) then used firmware full ver 1.5 lcd 9.0.48(also from this site) now its just biding my time untill an updated firmware can be installed,im sure it will be upped soon on this site by someone, hope this will help someone get that little bit closer to fixing their mp4 too :)

wlazio2000 30th Dec 2006 2:17 am

Re: Some 9.0.48 Downloads
 
Hi kravelick,
but your player it was in ADFU mode or your PC recognize external disk?
bye
Angelo

WhatTheHeck 30th Dec 2006 7:31 pm

Re: Some 9.0.48 Downloads
 
Hey kravelick, Sounds like I have the same player and the same problem as you. My player is a 2GB Uxcell i-Platinum with the ATJ2093H chip. I have tried downloading "Full 9.0.48 For 1.5 LCD" from this site, but the file seems to be corrupt. If you still have the file could you either upload it to this site or email it to me. I would greatly appreciate it.

amnman 30th Dec 2006 8:54 pm

WhatTheHeck:

What software are you using to upload the firmware?

WhatTheHeck 30th Dec 2006 9:14 pm

Re: Some 9.0.48 Downloads
 
I've tried two differnt versions of the MP3 Player Upgrade Tool. Version 4.07 doesn't seem to detect the player properly. But version 3.07 seems to work fine. No other software will even detect the device.

amnman 31st Dec 2006 12:12 am

4.70? is that correct?

WhatTheHeck 31st Dec 2006 5:34 am

Re: Some 9.0.48 Downloads
 
Well, I finally got the "Full 9.0.48 For 1.5 LCD" firmware downloaded and it installed perfectly. And not a moment to soon either. I was just about ready to smash the piece of crap with the biggest hammer I could find. Now I guess it back to trial and error. My recommendation is to NEVER buy an "Uxcell" product. I think this stupid thing played 2 songs then died. I guess you get what you pay for. Anyway, I'm off to test some software out. PIECE!!!

lddrizzt1 31st Dec 2006 5:56 am

Wow I thought that Uxcell had a good rep around here.
Wouldn't they take care of a problem like this if it's a faulty player?

kravelick 31st Dec 2006 12:39 pm

Re: Some 9.0.48 Downloads
 
wlazio2000 when i updated the new firmware it was in adfu mode ,yes. after fw update it then recognised it as external disk. amnman it is 4.07 not 4.70 and to show how much i know,i never realised it was a uxcell!!!! whattheheck ,glad to know you never smashed yours to peices,because it sounds like sooner or later we will all get the fix we need to bring our players back to full working order,lots of good work going on here so just be patiant

betaboy 5th Jan 2007 4:03 pm

Re: Some 9.0.48 Downloads
 
I too have the same chip, nano look alike that I bought from ebay, it was shipped from Hong Kong, Hong Kong. I made the mistake of not doing a backup before trying to update the firmware, it said 4GB on the back of the player on a sticker, but it was 2GB inside. I have the atj2093h chip inside with a samsung memory chip, it will show up as a removable drive now, but blue screen on the player, it is white the screen size is 1.5 inches
it had the 9.0.48 firmware on it before it died.

I am just waiting for someone to upload the firmware so I can use my MP$ player again.

WhatTheHeck 21st Jan 2007 6:33 am

Re: Some 9.0.48 Downloads
 
Well, since nobody is going to ever upload the Firmware that so many of us require. I purchased another 2GB i-Platinum MP3/MP4 player from Uxcell, identical to my dead one. It should arrive in about 2 weeks. So, in approx 2 weeks and 1 day I will upload a working firmware for this unit. Looks like my child will be getting a MP3/MP4 player for her birthday. Will post a reply when the player comes in, and keep you posted.

PEACE!!! :!:

adriantr 21st Jan 2007 8:11 am

WhatTheHeck. I may be new to this whole mp4 player thing but from what I gather from the rest of the forum it is not yet possible to extract firmware from devices with the 9.0.48 (or 9.0.50) firmware. I managed to do it with my player (9.0.48 firmware) but s1fwx won't repair the dumped firmware, therefore making it unusable.

WhatTheHeck 21st Jan 2007 11:48 am

Re: Some 9.0.48 Downloads
 
The way I look at it is that the firmware was programed into the player when it was shipped from the factory. If they are able to upload the firmware, I will be able to figure out how to extract it and make it useable. May end up having to write the program to extract the firmware, but anything is possible.

Or Maybe I'll end up with 2 dead MP3/MP4 players... who knows....

unknow2007 23rd Jan 2007 8:23 pm

I try up firmware with my MP4 i-Platinum MP4 Player 1.5 inch LCD 1GB Blue UXCELL, why donīt ok after finish up it?
my configuration is:
LKD_9301_01_06A
2006-12-07
9.0.48
2006-09-12

Please help-me.

Mp RipOff 10th Feb 2007 6:51 am

Oh,it's so nice to see that im not alone on this world with this white ipod looking little freak that i wanted to smash so many times.And we all feel the same..But I got it as a present.
So i would love to upload my firmware for anyone who needs it if you tell me how to :)
Its called Lisong from Wilson Co Ltd
LSD_9301_10
9.0.48

Right now its working "Ok" although it was 4GB untill 2 days ago when i did a format and seem to have messed up something cause it stuck at 2GB.Its particularly interesting cause before i formated i had exactly 2Gb data on it ,and yeah it said it was half full.
Does anyone have any suggestions how to get back my 4Gb,the only advantage that this little bastard has?(had)
Oh,and any idea if i could change this toy looking silly theme it shows?
thanks so much

lattesurf 10th Feb 2007 7:10 am

Mp RipOff , right now the v9.0.48 is not supported by the firmware extraction tool, so you can't extract a working firmware from it.

Without this working firmware dump, you can't theme your player. By using someone else's themed firmware of similar version would most likely brick your player.

So anything to do with firmware, leave it as it is, and enjoy your player until the tool supports your version.

Regarding the memory issue, if you had performed the Memory Hack Removal using Disk Tools, then 2GB is your actual real capacity.

The memory hack was made to fool the Windows OS, so that it thinks that it is 4GB, when it actually is only 2GB.

To further verify, you can open up the player and check the memory chip's serial number against the manufacturer's (Samsung or Hynix) website.

Mp RipOff 11th Feb 2007 11:28 am

Re: Some 9.0.48 Downloads
 
Thanks for the quick answer,

and wow!!I didn't think of that!I mean for first look i thought it was a toy with the funny 4Gb sign stuck on the back so i was really surprised when connecting to the computer (succeded after a few hours of struggleing) it also said 4Gb. By now its well clear it has only 2Gb..
After your response immediately i took it apart,not only to take revange on the little bastard but to check the memory chip and here it is people:
Samsung
K9LAG08U0M-PCB0

I couldn't find it on Samsung's website only on some chinese retailer's one and it refered to it as a 2Gb mem chip.
This is the story.

By the way,honestly the crap quality,the tasteless and inconvinient software design and all the bugs it has are much more annoying issues for me then the memory scam.Except the fact that thats what takes most people's attention and attracts them to buy it.

Thanks for the help again and if i can help a little considering this scam issue then let me know.


Please someone make it possible to change this silly ugly theme in my version as well cause it irritates me so much.. :(

rahulmig 17th Feb 2007 1:59 am

Re: Some 9.0.48 Downloads
 
hi,
I got a 4 Gb Player as it shows i bought it frm ebay Honk Kong.When i formated its Showed me 962 MB i donno wht has happened. how t o regain that space. Also i have having a firmware of 9.0.48 . 25-7-2006
then i dlded frm here the same version and updated it. now i cant on my player.. !!

Plz help me GUYS !!

lattesurf 17th Feb 2007 2:45 am

rahulmig , if you had formatted using the MP3 Utilities Disk Tool, then your player had been originally hacked. It is a 1GB chip hacked to show 4GB. There is no way of regaining that lost 3GB, as the chip physically is only 1GB.

If your player now cannot be detected by MP3 Utilites Upgrade Tool, then you will need to follow the Dead Player Recovery Guide here http://www.mympxplayer.org/dead-play...ide-vt567.html

If it can be detected by the Upgrade Tool, then you will need to try every v9.0.xx series firmwares in the downloads section here http://www.mympxplayer.org/actions-9...mare-dc37.html
As there are very limited v9.0.xx series firmwares, i'll suggest you try every single firmware.

muhammedonur 30th Aug 2007 9:12 am

Re: Some 9.0.48 Downloads
 
someone give 9.0.48 1.5" mp4 player firmware because url was dead and my mp4 player 9.0.48 atj2093h 1.5" please help me. . .

muhammedonur 31st Aug 2007 11:14 am

Re: Some 9.0.48 Downloads
 
Quote:

Originally Posted by kravelick";p=&quot (Post 16959)
:) hi, this is a partial succes story ,i had a totally dead mp4 from ebay,china,(upgraded it with wrong firmware and never made a backup),anyway i have the new atjxxx chip so its been a problem getting it even to be recognised as a flash disk,but i finally did it after 3 days of looking and trying different fw.my chip is atj2093h it should be 4 gig but is only 2 gig. i installed firmware tool 4.07(from this site) then used firmware full ver 1.5 lcd 9.0.48(also from this site) now its just biding my time untill an updated firmware can be installed,im sure it will be upped soon on this site by someone, hope this will help someone get that little bit closer to fixing their mp4 too :)

if you have this fw please sent me or upload to rapid and thake link . . .

please please please

lolita 31st Aug 2007 9:05 pm

Quote:

Originally Posted by adriantr";p=&quot (Post 19680)
WhatTheHeck. I may be new to this whole mp4 player thing but from what I gather from the rest of the forum it is not yet possible to extract firmware from devices with the 9.0.48 (or 9.0.50) firmware. I managed to do it with my player (9.0.48 firmware) but s1fwx won't repair the dumped firmware, therefore making it unusable.

You can try an s1clone dump, make sure it is empty of all files first so the dump will be smaller (s1clone dumps the entire contents of NAND flash chip).

muhammedonur 1st Sep 2007 2:33 am

Quote:

Originally Posted by lolita";p=&quot (Post 36220)
Quote:

Originally Posted by adriantr";p=&quot (Post 19680)
WhatTheHeck. I may be new to this whole mp4 player thing but from what I gather from the rest of the forum it is not yet possible to extract firmware from devices with the 9.0.48 (or 9.0.50) firmware. I managed to do it with my player (9.0.48 firmware) but s1fwx won't repair the dumped firmware, therefore making it unusable.

You can try an s1clone dump, make sure it is empty of all files first so the dump will be smaller (s1clone dumps the entire contents of NAND flash chip).

it didn'n wordk.

gencom 13th Oct 2007 2:14 pm

please reload links


All times are GMT -7. The time now is 3:22 am.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.0 RC 2