Some 9.0.48 Downloads

tadad1 · #1 (**permalink**) 16th Dec 2006, 1:40 am

Full 9.0.48 For 1.8 LCD

http://uploaded.to/?id=2dc531
http://uploaded.to/?id=812df7
http://www.sendspace.com/file/jcgtvt

Full 9.0.48 For 1.5 LCD

http://uploaded.to/?id=55a573

I have sourced these from various Chinese web sites and have no info on what players they are from. Do not try to use them to upgrade a working player use only to try and recover a dead player.

kravelick · #2 (**permalink**) 29th Dec 2006, 4:39 pm

hi, this is a partial succes story ,i had a totally dead mp4 from ebay,china,(upgraded it with wrong firmware and never made a backup),anyway i have the new atjxxx chip so its been a problem getting it even to be recognised as a flash disk,but i finally did it after 3 days of looking and trying different fw.my chip is atj2093h it should be 4 gig but is only 2 gig. i installed firmware tool 4.07(from this site) then used firmware full ver 1.5 lcd 9.0.48(also from this site) now its just biding my time untill an updated firmware can be installed,im sure it will be upped soon on this site by someone, hope this will help someone get that little bit closer to fixing their mp4 too

wlazio2000 · #3 (**permalink**) 30th Dec 2006, 2:17 am

Hi kravelick,
but your player it was in ADFU mode or your PC recognize external disk?
bye
Angelo

WhatTheHeck · #4 (**permalink**) 30th Dec 2006, 7:31 pm

Hey kravelick, Sounds like I have the same player and the same problem as you. My player is a 2GB Uxcell i-Platinum with the ATJ2093H chip. I have tried downloading "Full 9.0.48 For 1.5 LCD" from this site, but the file seems to be corrupt. If you still have the file could you either upload it to this site or email it to me. I would greatly appreciate it.

amnman · #5 (**permalink**) 30th Dec 2006, 8:54 pm

WhatTheHeck:

What software are you using to upload the firmware?

WhatTheHeck · #6 (**permalink**) 30th Dec 2006, 9:14 pm

I've tried two differnt versions of the MP3 Player Upgrade Tool. Version 4.07 doesn't seem to detect the player properly. But version 3.07 seems to work fine. No other software will even detect the device.

amnman · #7 (**permalink**) 31st Dec 2006, 12:12 am

4.70? is that correct?

WhatTheHeck · #8 (**permalink**) 31st Dec 2006, 5:34 am

Well, I finally got the "Full 9.0.48 For 1.5 LCD" firmware downloaded and it installed perfectly. And not a moment to soon either. I was just about ready to smash the piece of crap with the biggest hammer I could find. Now I guess it back to trial and error. My recommendation is to NEVER buy an "Uxcell" product. I think this stupid thing played 2 songs then died. I guess you get what you pay for. Anyway, I'm off to test some software out. PIECE!!!

lddrizzt1 · #9 (**permalink**) 31st Dec 2006, 5:56 am

Wow I thought that Uxcell had a good rep around here.
Wouldn't they take care of a problem like this if it's a faulty player?

kravelick · #10 (**permalink**) 31st Dec 2006, 12:39 pm

wlazio2000 when i updated the new firmware it was in adfu mode ,yes. after fw update it then recognised it as external disk. amnman it is 4.07 not 4.70 and to show how much i know,i never realised it was a uxcell!!!! whattheheck ,glad to know you never smashed yours to peices,because it sounds like sooner or later we will all get the fix we need to bring our players back to full working order,lots of good work going on here so just be patiant