[solved] Displays only busy sign ???

tadad1 · #11 (**permalink**) 23rd Dec 2006, 8:39 pm

sachit, You have not repaired the firmware. You need to rename the file dump.bin, place it in the s1fwx folder and run the repair.bat. Once you have done this you should be able to load the firmware to your player providing it is connecting properly.

sachitmaskey · #12 (**permalink**) 24th Dec 2006, 12:15 am

I'll try n let u know abt it.thnks 1nce more!
sachitmaskey

sachitmaskey · #13 (**permalink**) 24th Dec 2006, 3:59 am

I did as u said bt it didn't solve the problem.I kept the firmware file in the s1wfx folder & repaired it.A file "dump.bi$" appeared which I later I later repaired into dump.bin.Then I tried to re-intasall the firmware bt same prob occured "invalid Firmware file ugrade !" .It still displays the busy sign.What sud i do now?Help me !
sachitmaskey

sachitmaskey · #14 (**permalink**) 24th Dec 2006, 4:10 am

How would I remove that busy sign on the screen?Why does it says invalid firmware file upgrade error while it is the right firmware & I've even repaired it using sw1fx....help me
sachitmaskey

Que · #15 (**permalink**) 24th Dec 2006, 4:14 am

After a repair the unrepaired dumpfile is called dump.bi$, the file you want to flash is the repaired dump.bin. Do not rename dump.bi$, this is your old file from the player, file is in a non-repaired state. Just to keep save as a backup. But only if it was an original working dump of course.

tadad1 · #16 (**permalink**) 24th Dec 2006, 4:16 am

sachit, when you repair the firmware you end up with 2 files 1 is dump.bi$ which is the original unrepaired firmware and a new dump.bin which is the new repaired firmware.
If you are trying to load the dump.bi$ file you are still trying to load the unrepaired firmware.

Use the new dump.bin.

sachitmaskey · #17 (**permalink**) 24th Dec 2006, 7:40 pm

Yes I tried to upgrade with dump.bin which was repaired and also dump.bi$ but it didn't work...help me...
sachitmaskey

sachitmaskey · #18 (**permalink**) 24th Dec 2006, 7:48 pm

Other player are dead displaying a black screen but my player is dead displaying a busy sign all the time.

sachitmaskey · #19 (**permalink**) 26th Dec 2006, 12:35 am

What should I do now?
sachitmaskey

sachitmaskey · #20 (**permalink**) 10th Feb 2007, 7:06 pm

Problem solved

My problem is solved now n I thanks u all guys 4 makin it a success.I tried it to repair it since months n today i did it.I never gave up my hope n kept fightin n today i won it.U guys really helped me...

How i solved the prob:

I upgraded my mp4 with wrong firmware then black screen apeared then i followed dead player recovery process.After that i installed the right firmware that i used to.And Bingo !!! it's not virus or any format error it was firmware error.Thanks once agan...
sachitmaskey