4gb Nano Clone with a restarting problem
 

Like the title suggests, I have a 4gb nano clone with a problem...it constantly restarts. As soon as I took it out of the box and turned it on, the problem started. It goes through to the menu (sometimes) then restarts. I thought it might have been a static electricity/short problem, so i removed it from it's metal case and it still does it.

Any ideas ? If I could keep it on long enough, I'd be able to post some specs....all I know is that it uses a 9.0.50 firmware and is claiming to be 4gb (cant verify it just yet)

I'd love any kind of help guys and girls....I'd hate to have to send it back to the vendor, as I know from past experience I'd just get the run around and no refund

Re: 4gb Nano Clone with a restarting problem
 

I need the same thing too. My chip is a ATJ2091N, 4gb, 1.5 inch screen, has that plant or flower boot up screen. Mine can play mp3,amv,voice record,fm radio,games. This is the first day I had it and it's screwed up already. I read the manual and it said something about updating firmware to make it work properly now its junk. Been up all night. I know everything about it now. Just need the firmware to bring it back. I've emailed the seller on ebay and even other ebay members that bought from same seller to ask for firmware. If I get it I'll post it somewere.

Re: 4gb Nano Clone with a restarting problem
 

Nevermind....I fixed the problem, and made a new one for myself :D

I opened up the chi-pod, and removed the circuit board from the case and I found some dodgy soldering work where the battery connect.....I resoldered it and now the chi-pod turns on and stays on, which lead me to my next problem.

Since it was running again, I decided to format the "4gb" to see what I actually had, and wouldn't you know it ? It was a 1gb mp4 player that had been hacked to 4gb.

HINT: When you hook your "4gb" mp3/4 player up to your comp for the first time, and it shows up as 2 seperate removable disks, most likely you have a hacked player. Mine came up as a 3.99gb drive and a 4mb drive....as sson as i removed the 4mb partition, the player became it's regular 1gb self again. E-britian was the person I bought it from on ebay, and judging by the posts about him in the blacklist forum, I'm not the only one he has scammed. I have left bad feedback and I'm persuing a refund via paypal

Re: 4gb Nano Clone with a restarting problem
 

Are you serious. Mine is doing that now. There's a 4gig and a 2mb showing up as 2 different drives on my pc. Mine doesn't work but I can still look at it when it is hooked up via usb. How did you get rid of the partition. I'm gunna file a complaint to if I find out the same thing has been done to mine.

Re: 4gb Nano Clone with a restarting problem
 

there is a propgram called "disk tools"....it should be on the cd that came with your chi-pod, but if it isn't there, you can download it from the files section of this site.

the program is used for formatting your player, and it also has a tool for partioning the drive....just move the slider to 0 and it will remove that 2mb partition.....as soon as you remove it, format the drive and it will reveal the true size of your player.....or you could just take the back off your player and look at the part number of the chip and google it.....luckily for me, my chip had a "1gb" sticker on it....but i still formatted the drive to verify it.

at least the player functions as it should, but it is not the 4gb i paid for......i sent e-britian a lovely email and i'm waiting for his/her response lol

Re: 4gb Nano Clone with a restarting problem
 

Holy $hit. Mine is not even a gig. I'ts like 961.7mbs. I'm not gunna send him a letter yet cause I already gave him good feedback and he hasn't gave me any. I went to look at his auctions and what do you know all his nano clones are 1gbs now. What a bunch a scams. I'm gunna dispute with paypal that's for damn sure.

Skunk:

What you may want to do is first use the DISK TOOL for formatting. But encrypt it first when you format by bringing the slider all the way to the right. Don't use a password, leave that area unchecked.

Once that is done, then slide the slider all the way left and reformat unencrypted.

Use the low level formatting.

Your not going to get a full 1GB.

Then what? Jusy use Mp3 player upgrade tool to update the firmware. I don't have to erase old firmware?

Skunk , do not update any firmware. It will only kill your player.
Only perform a format on your player, the guide to formating is here http://www.mympxplayer.org/how-to-re...ck-vt2400.html

Awww lattesurf, you beat me to it. :D

Beware People! If you see 4G on the picture, it means 4 GIGABIT = 512mb! :)

Re: 4gb Nano Clone with a restarting problem
 

Too late my player was not playing the amv that I converted. I never messed with these things before so I read the poorly written instructions and it said the player will not work properly if firmware was not updated so I updated it and now it's dead. I only had the thing for 1 day. I bought a 4gb player but it turns out to be a 1gb. So formatting will not do anything to firmware? I thought firmware was like the OS and after formatting that you would have to install firmware like OS. Well I need firmware version 9.0.50 for a 1.5 screen with fm, voice recorder, games, amv, mp3. But I guess there isn't any firmware extractor that can extract firmware above 9.0.4.

hello people please some one help me, i have ipod 4Go but the memory is just 108Mo when its empty what can i do to fix the problem.exuse my bad english

You cannot fix it. To make it simple. They sent you the wrong one on purpose. Get your money back.

toufikkk , do a format on the player first the guide is here http://www.mympxplayer.org/how-to-re...ck-vt2400.html

There are no 4GB players currently, and yours is a hacked player. i'll suggest you contact your seller for a refund.

Hi Uncle_chop_chop

HELP ME BY SENDING THE FIRMWARE FOR ATJ2091N FIRMWARE 9.0.50

kindly send the firmware to me. I have the same nano clone cheated from ebay (Hongkong product). The sticker outside says it as a 4gb player. but i belive it is just 1 gb
Anyhow, i need the Firmware very seriously since my player is in the recovery mode. kindly extract the firmware from your clone and email it to me..please.........i really want the firmware for my set to function. kindly help me. my email ID is 'drsjaikumar@gmail.com'
thank you in anticipation

Oh man, if only I saw that before I Flashed my Device. I've been pwned... :(

I have a problem. I brought a MP3/MP4 Player from eBay (4GB sorry, 1GB).

Item Here:-
http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEWN:IT&ih=013 (Apologies if URL's are not allowed) (Oh and tell me about it the Seller is a complete R-Tard).

The Chip is: ATJ2091J
Memory: 4GB (No, 1GB. Damn I keep forgetting ;) I better not sell them) SAMSUNG 646 - K9G8G08U0M

I have no Idea what the Board ID is as its not written anywhere.

All I know is it was 9.0.50


Please help me!

Gothica De Pwner, Due to the fact that there are no tools for backing up 9.0.48 or 9.0.50 firmware there are not many available for download.

If you have tried all the ones in the Download>Firmware section then you may not be able to recover your player at present.
Once the tools become available there should be a lot more firmware uploaded that may work for you.

tadad1, Thanks for breaking it to me in a languge I understand...

The Firmware must of got on there somehow. I am in the process of asking the seller to send me the firmware for it... Awaiting reply... (He's probibly in bed, ready for a day of scamming).