Firmware for ATJ2091N (need 9.0.50 for 1.5" LCD)
 

Anyone with the same player able to provide a dump?

Nano Clone
1.5" LCD
Memory: Samsung K9G8G08U0M-PCB0 1GB

Chipset: ATJ2091N

**UPDATE**

Since posting I have found out that it orginally had 9.0.50 firmware on it

I believe it was running on 9.0.43 before I er....F*$ked it up.


I have tried a few firmwares on the site but sadly nothing seems to work.
I tried using : 9.0.43.atj2091h.bin & also 9.0.48 Full for 1.5 LCD

When I flash with 9.048 full it does flash ok, but after the welcome screen I get the low batt icon and then it just powers off.

When I try 9.0.43.atj2091h it just stays in recovery mode.




Anyone got the same player?
mine is this one
http://cgi.ebay.co.uk/ws/eBayISAPI.d...2088%26fvi%3D1

nervous1uk , when you used the 9.0.48 Full for 1.5 LCD firmware, does the player function normally while it is connected to the computer via USB?

Yeah it kinda functions ok when connected to usb.
the connect screen comes up & the battery icon shows it's charging.

but after a few mins the screen become distorted.
So I assume its not quite right for my player

nervous1uk , it seems to me that the firmware you tried might be able to work. But the problem might be that your battery is dead and cannot hold its charge.

Usually for a player with wrong firmware, you'll be able to see either a blue or lighted black screen.

i'll also suggest a format on your player as there are currently no 4GB, and yours is one with hacked memory. The guide is here http://www.mympxplayer.org/how-to-re...ck-vt2400.html

After this, try the firmware again but leave the player plugged into the USB and see if it able to function normally (play mp3s and videos).

Thanks for your reply,

When I tired that firmware although I couldn't use it, it was still detected as a usb drive & I was able to format it to the correct size of 1 gigabyte.

I then tried to upload the firmware again, but sadly it still doesn't work. just comes up with the low battery icon and switches off

A previous firmware I tried just gave me ablue screen but didn't switch off. So im guessing that the battery is fine.

nervous1uk , if that's the case, then you'll need to wait for sometime until a suitable firmware comes along.
Else try contacting your seller and see if he is able to send you the dump file.

Also check your cd, some comes with a .bin firmware file.

Thanks again,

I have emailed the seller, Hoping he can provide a dump for it. or my old other chance is that someone else on here has identical chipset.
also checked the cd, the was no firmware with it!

until then at least I have 1gig of portable storage!! lol


*Update*

Skunk also bought the same player from the same seller on ebay.
its looking like the player came with 9.0.50 installed & not 9.0.43 as I thought originally

http://www.mympxplayer.org/viewtopic.php?p=17410

Re: Firmware for ATJ2091N
 

I managed to acquire a dump from another guy who bought from the same seller.
But it looks like it wasn't dumped right. the update tool says its version 0.0.00
I did try it though, just getting a yellow screen with hourglass icon! :(

but it is the only dump I have tried that has the same yellow load screen as the player originally. I opened the dump with atjupload, to find it only contains 3 files. could this be merged with another firmware maybe??

if anyone wants to take a look at it pm with email address and i will send it.

I noticed there is a 9.0.50 firmware in the download section, but its for 1.8" screen. is there anyway to alter the screen size to make it work on a 1.5" player

i also have bought this mp4 player, and messed it up :-(.

nervous1uk could you please email me the dump you recieved to liam030322@hotmail.com thanks

Gianfrancoliam - dump on its way.



We might be able to get these newer firmwares soon.
I got in contact with wiRe today (maker of s1fwx)
Here is what he told me

"there is a tool in progress, called "s1flash", which will be able to
download such firmwares.
stay tuned..."


we just need to hang on a little longer

thanks alot :-) the seller has now left ebay ,scammer!

cheers mate

Re: Firmware for ATJ2091N (need 9.0.50 for 1.5" LCD)
 

i have the same problem as you nervous1uk exactly the same..
also tried the same as you..

i don`t know what my old frimware version was but i hope someone soon helps us out :)

if anyone here finds something please post it here or mail me: thomas_schenk@hotmail.com

help i nedd oh this firmware:
1.5" LCD
Memory: Samsung K9G8G08U0M-PCB0 1GB

Chipset: ATJ2091N

grazie

Re: Firmware for ATJ2091N (need 9.0.50 for 1.5" LCD)
 

yeah im in exactly the same boat here, got same player and have tried the same 9.048 firmware and get the same results of it starting up ok then get the battery icon and it powers off, with the usb lead in it shows a comp and mp3 icon and says connected then after a few min the screen is slightly distorted but cant access any features of the player.... no one got the 1.5" 9.050 firmware yet?

Re: Firmware for ATJ2091N (need 9.0.50 for 1.5" LCD)
 

I have more or less the same problem. LCD 1.5", Chipset AT J2091N, 4 GB with radio and motherboard FMX2588@163.COM. I have tried a lot of firmware but screen always black (MP4 dead). The only one that give me some symptom of life is 9.0.48 full 1.5 LCD but I have permanently the clepsydra on. I hope that very soon we can have a new firmware that can solve our problems.

Put me down for a copy of 9.0.50 as well. I knew I should have made a backup!!!.

Im using the 9048. Screen is garbled with USB but if I switch it on and off its ok. Software works ok with music etc...

the 1.8" version didnt work

Re: Firmware for ATJ2091N (need 9.0.50 for 1.5" LCD)
 

I have exactly the same problem.

I saw today, that my player make problems when I copy more then 1 GB on it (it should be 4)
So I made a backup from my firmware (I think it was 9.0.50 or 9.0.48), and then I formatted the drive and saw - ohh only 1 GB...amazing....
I read anywhere - I don't know where - that it is a firmware problem - that I only have 1 GB left.....

So clever how I am - I updated my recovered backup - ignoring, that this version (which I made the update) were all 00000 - and I could see....NOTHING WORKS ANY MORE......FUCK......I could at least have a 1 GB MP4-Player.....arghh why the hell did I do this in the morning.....

So of course I read the whole day about the whole topic, try very different kinds of firmwares - and I also read, that it is impossible to make a backup from 9.0.50 .....arghh....I was so stupid in the morning....

but back to topic - I have now the same problem like everyone else - that was the first and only firmware (the 9048 full) which works at least a bit.....but yeahh same problem, battery seems to be empty.....

So hopefully we all get soon a new version - and the problem (with the 1 GB and not 4 GB) is also going to Ebay.....

Cheers

Bombe

here are some new FW but it doesnt work for me.

http://www.factory-shop.net/index.ph...&articleid=128

Re: Firmware for ATJ2091N (need 9.0.50 for 1.5" LCD)
 

cheers for the link, no joy with them tho :(

Re: Firmware for ATJ2091N (need 9.0.50 for 1.5" LCD)
 

per mialinu volevo sapere se hai risolto, nel caso saresti cosi gentile da @hotpostarmi il dump.grazie brittialex@hotmail.com

Re: Firmware for ATJ2091N (need 9.0.50 for 1.5" LCD)
 

:evil: Hi!
Please send me the dumps to brittialex@hotmail.com
Thanks.

hello,
i have a mp4 player same with malak's
i tried firmware upgrade and it dumped.
i need original firmware for my player.
anybody help me please?

firmware info :
ACT2097_S72_1
2006/04/25
9.0.50
2006/10/30

link : http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=250063542456

if anybody have it please can send me : acihatholta@yahoo.com

Re: Firmware for ATJ2091N (need 9.0.50 for 1.5" LCD)
 

Hi all

I would like to know from nervuos1uk if he ever got a reply from wiRe on the tool he is working on S1flash.

That will be the only way that we will be able to fix this problem :cry:

Hope he can reply to us and i think there is a lot of guys that stuffed up their player that will be willing to donate some money to the project :wink:

Re: Firmware for ATJ2091N (need 9.0.50 for 1.5" LCD)
 

please help me i have changed the firmware and i can't find the right

the chip are atj2091n
and samsung k9lag8uom
@ls767
i have opened and read the 3 chip name but i cant find the right firmware
is an colour 1.5 like similar ipod china :)
please