Installed new firmware, now connects for very little while
 

I installed new firmware for my player. After installing the player connects with computer for very little while.
This is my player:
http://img183.imageshack.us/img183/2...mage002ml7.jpg

Help Me!!!!!!!!

profile , you need to explain your problem further.

Is your player able to function/work properly currently?

What do you mean by it connecting for a little while? Does the removeable drive disconnect itself automatically?

Re: Help me
 

Player does not work properly, because - as I think now - the new firmware is not adequate to this model. Any functions can not be active. There is only one symptom of that my player is not completely dead: when player is conneted to the computer, PC can see this new device for a while (about 10 seconds). And then this connection between PC and MP4 disappears. I think that if the connection lasts longer it will be possible to install new firmware.

profile , run the MP3 Utilities Upgrade Tool, if it is able to detect your player, then you need to try all the similiar firmware dumps in the download section.

For this, you need to open your player and look for the processor's serial number (eg ATJ2085 or ATJ2091), then it'll be easier to locate suitable firmwares.

If the upgrade tool does not detect your player, then you need to perform the Dead Player Recovery Guide here http://www.mympxplayer.org/dead-play...ide-vt567.html

Re: Help me
 

I tryed this instructions http://www.mympxplayer.org/dead-play...ide-vt567.html
but there was no results and my processor is ATJ2097, this is one of the newest versions.

Re: Help me
 

I recovery my player, i had to akt quik.

profile,

So you have managed to recovery your player right now and it's working ok?