Dead Player BMS Expert BX88C 1gb black

armis · #1 (**permalink**) 5th Jan 2007, 6:00 am

Hi heres the scren of my mp3 http://www.bms.lt/?preke=23310 .Plz hep me i was playing around with firmware for my mp3 player BX88C, i downloaded and instaled S1 mp3 Wilson Co.ltd 3.5.37 firmaware edited with lithuanian suport,mainly worked god but i recodnized it has litle bug so i started to search for my main firmware 3.5.35 i found i it heres the link http://www.mympxplayer.org/mp-485e-m...are-df401.html instaled it but my mp3 player go off and didint turn on so i tryed t disconect him from usb and got my hand shocked by electrysity,still no luck player dead.tryed to connect to charger ,then player screen goes up blue for 1 sec and again black,only goes blue for some secs wen presing menu button,plz help me to recover it.Waht corectly firmware do i need

lattesurf · #2 (**permalink**) 5th Jan 2007, 6:24 am

armis , what bug did the first firmware with lithuanian support had?
If the bug is fixable, then you can use that firmware to flash back into your player.

Or else, you will need to try every 3.5.xx firmware for your screen size in the downloads section until you get another working firmware.

armis · #3 (**permalink**) 5th Jan 2007, 6:45 am

Thanks,halfy rewiwed my player by tada1 guide the only thing left is to format my player wich should i use fat or fat32 ?.The bug was when i was trying to turn on the player it showded me welcome screen and then the turning off screen,and player turned off the only wai was to turn on him by connecting to electrisisty so i can get to menu

lattesurf · #4 (**permalink**) 5th Jan 2007, 7:20 am

armis , for formatting always use FAT file system.

armis · #5 (**permalink**) 5th Jan 2007, 7:36 am

Omg,i thinked i finaly repaired my player but no.My windows recodnizes my player all, i can write fw,i can turn on and of it by switch buton.But all the time darn blue screen!,i tryed full 3.5.37 3.5.55 firmwares no luck,tryed the extract and repair tool no luck,maybe i do something wrong.
I download the firmware select new firmware then select the old firware in rdiskupdate all ok start update,says no erors sucess,but my mp3 player doenst restart the light in scren flashes for 1sec and player continues to work,then again windows finds removable disk,blah blue screen.Maybe i need to fully flash my player but then how i will upload new firmware?

lattesurf · #6 (**permalink**) 5th Jan 2007, 9:02 am

armis , the Upgrade Tool will display success even if the firmware file is not compatible with your player. The success means that it is flashed fully into your player.

The current problem is you might not have the correct combination of Full and Dump firmware. However, keep trying all the available dump firmwares.

After you have tried all the dump firmwares and still cannot get your player working, you may need to try another Full Firmware and try it with the firmware dumps again.

To do this, you need to short the pins according to the Dead Player Recovery and get the player to the ADFU state as you have done before and flash another new Full Firmware in. Then repeat the whole process with the dumps again.

Cedex · #7 (**permalink**) 14th Feb 2007, 11:19 am

armis turi skype?
please give me a link to a program which could instal a new firmware to my mp3 player

wtf_mix · #8 (**permalink**) 9th Mar 2008, 1:01 pm

il buy mp4 player like that.[bx88c].anybody have it for sale.???? pirkciau bx88c grotuva.kaina sutartine. :shock: