I need firmware to K9G8G08UOM

CRUOGLIO · #1 (**permalink**) 7th Jan 2007, 9:47 am

I need firmware to K9G8G08UOM 6/1/2007

http://cgi.ebay.es/2GB-MP4-MP3-PMP-F...QQcmdZViewItem

lattesurf · #2 (**permalink**) 7th Jan 2007, 12:04 pm

CRUOGLIO , according to the Samsung datasheet, Samsung K9G8G08UOM is a 8Gigabit (1GigaByte) memory chip, and not as advertised to be 2GB. The memory chip had been hacked to show 2GB instead.

You need to open the player again and look for the processor's number (eg ATJ2085 or ATJ2091). With this number, it would be easier to look for likely firmware in the downloads section.

CRUOGLIO · #3 (**permalink**) 7th Jan 2007, 12:11 pm

thanks lattesurf, I open de reproducer and the model the processor is:

Nano-clone mod with File-Browsing
Processor: ATJ2093H
Memory: 1GB Samsung K9G8G08UOM
firmware: LKD_9702_01

thenk for a new information.!

lattesurf · #4 (**permalink**) 7th Jan 2007, 12:45 pm

CRUOGLIO , based on your chipset being ATJ2093, it'll be the 9.0.xx series.
Currently the firmware extraction tool does not support any versions higher than 9.0.43. Do you recall your original firmware's version?

CRUOGLIO · #5 (**permalink**) 7th Jan 2007, 1:12 pm

no, I do not remember, single memory the name: LKD_9702_01

lattesurf · #6 (**permalink**) 7th Jan 2007, 9:45 pm

CRUOGLIO , the downloads section has a list of the 9.xx series firmware http://www.mympxplayer.org/actions-9...mare-dc37.html

If none of these work, then there is nothing you can do until the extraction tool is available.