S3'' POLARIZED SunGlasses (1GB)
 

Well I bought a New pair of MP3 SunGlasses off ebay link is

http://cgi.ebay.com/ws/eBayISAPI.dll...m=140095132300

but the thing is they dont work.... this is what I tried so far on 4 different computers...

Installed MP3 Player Utilities 4.10
Plugged MP3 Player in
Installed Driver

Heres a picture http://img117.imageshack.us/img117/5894/mp3oa3.jpg

everything else after it doesn't work....any ideas anything helps :(

or if someone can find the firmware for it would be great

Re: S3'' POLARIZED SunGlasses (1GB)
 

no one?

You don't need to install anything with the sunglasses unless you have windows 98 then you'll just need to install the driver. When you plug the sunglasses up to your computer click on your windows start button and choose mycomputer and find your sunglassess :/drive double click on it to open it up and drag and drop or copy and paste your music in mp3 format there. That's it your now styling and jammin'!.

thing is the built in memory card isn't formated or has no sectors to right on if you know what I mean...I cant see it anywhere no matter what I try

GoldenZero , if the memory chip is not formatted, it would just appear as a 0-byte Raw data. Since you don't see it appearing in your computer, likely your player/sunglass has some firmware problems.

i'll suggest that you contact your seller for an exchange.

did but I dont wanna pay the shipping again XD Hong Kong lol

GoldenZero , although i've seen these sunglass players appearing on ebay recently, but i'm not sure what chipset or firmware version they running off. They might not even be Actions chipsets, which would mean most tools on this site could not be used on yours.

Another alternative would be to format using HP Format Tool here http://www.mympxplayer.org/hp-format-tool-df466.html

If it still does not work, you'll need to open the sunglasses, not sure where to open, but the processor chip should be located somewhere within it. Then you'll need to perform the Dead Player Recovery here http://www.mympxplayer.org/dead-play...ide-vt567.html

Good Luck.

The HP format tool wont pick up the sunglass's it only picks up the card readers :( I guess ima have to try the dead player revoery thing

GoldenZero , i'll suggest that you contact your seller for an exchange or refund. As you might not be able to locate a suitable firmware for your sunglass player.

Well, if tried many compinations and nothin works lights change on off/red/blue....noithin still says that in is BLAH (in the pic) its

Samsung 707
K9G8GD8U0M
PCB0
-----------------
AT J2091N
G10810B 11E

Board: GB9101R-FM
Date: 2006-10-06

those are the two chips the B might me 8's and viseversa

anyone got any ideas?

GoldenZero , the ATJ2091 uses the v9.0.xx series firmwares, which is available here http://www.mympxplayer.org/actions-9...mare-dc37.html

However, those firmwares in the downloads section are for players with colour screens. You can try them though, but might not work properly for your player.

Another alternative is to go to S1mp3.org, as your firmware might be using the pen-style player kind, which they might have more firmwares on.

well I put the Full Version 1.5 LCD 9.0.48 firmware on it...and played with the chips with tweezers :O and now I can get into the mem of the card :O im getting furture :D...gonna see if it works when music is done uploadin on it.


---
Well muisc uploaded to it fine but cant play the music :(
--
no blue light anymore only a red...and when I click the up volume the red light blinds but doesn't do anything and volume doesn't go up