s1Flash release on s1mp3.de - 22.3.2007

Shorty · #11 (**permalink**) 25th Mar 2007, 2:00 am

Hi!

I´m new here and I have troubles to start that Program...

s1flash v1.0 - offers direct access to the players nand-flash
copyright (c)2006-2007 wiRe - http://www.s1mp3.de/ - FREEWARE

I´ve a dead player and one working, version 9.0.48

I cant start the programm, it conects automatically to paypal, i dontt want to pay before i dont konw if it works :-(

any idea?

thanks
shorty

tadad1 · #12 (**permalink**) 25th Mar 2007, 2:23 am

Shorty, You can not run s1flash by double clicking on it. You need to open a command window and run it from there. You also need to first put the player into ADFU mode by setting it to Upgrade Firmware in the players settings\system menu before running s1flash.

Shorty · #13 (**permalink**) 25th Mar 2007, 2:41 am

hi tadad1

thanks for that, but of course i tried it in that way

the program starts and then it open the explorer to connect to paypal, after that the prog is closed again.

if i start FW Upgrade mode on the working player it goes back to simple connection, not ADFU mode

if i start e.g. the upgrade prog, it works in ADFU mode

what is wrong?

thanks

Shorty · #14 (**permalink**) 25th Mar 2007, 2:46 am

sorry, now i succeed to start the flash tool, but i dont succeed to get the player in ADFU mode

it switch back to normal mode after i coosed FW upgrade at system settings

chinapod · #15 (**permalink**) 25th Mar 2007, 3:09 am

It seems to me that most of the series 9s prevent you via the menu putting it into ADFU mode. Is there a way round this? The prog runs from a DOS type window, I have donated once, but to continue close the PAYPAL window in task manager.

As any one read or got any answer to my ealier post?

Shorty · #16 (**permalink**) 25th Mar 2007, 3:33 am

@ tadad1

any other idea to switch to ADFU mode ?

i cant do the procedure of dead players, because in that way i would loose also my functional one

i need to read out this one and then maybe i can send back the fw

regards
shorty

tadad1 · #17 (**permalink**) 25th Mar 2007, 3:39 am

chinapod, That is what my 9.1.50 series player did as well, I thought it was just a problem with my player.
I will send my player to "wiRe" tommorrow hopefully it will help him to refine the program. He may even be able to include a routine to automate some of the process or at least set the player to ADFU mode.

Alair · #18 (**permalink**) 31st Mar 2007, 10:10 pm

Fellows,

Some players could not be used with the Swan ADFU driver. In the driver's info file there is the following line:

"Swan ADFU Driver"=LIBUSB_DEV, USB\VID_10d6&PID_ff51

The problem is that my player is a USB\VID_10d6&PID_ff61 device. The string used to identify my player is "USB 2.0 (HS) ADFU Device" while the string for the Swan ADFU is USB 2.0 (FS) ADFU Device. So, I was not able to install the device because it was not compatible with my hardware.

I have tried just to modify this line, changing the ff51 to ff61. The player got recognized, but the s1flash did not work... It keeps me given the same message "failed to open device". It seems to me that the driver does not work with this ADFU device.

Am I right? Do someone have any idea?

Thanks

CoYoTe · #19 (**permalink**) 1st Apr 2007, 8:29 am

Quote:

Originally Posted by Alair

Fellows,

Some players could not be used with the Swan ADFU driver. In the driver's info file there is the following line:

"Swan ADFU Driver"=LIBUSB_DEV, USB\VID_10d6&PID_ff51

The problem is that my player is a USB\VID_10d6&PID_ff61 device. The string used to identify my player is "USB 2.0 (HS) ADFU Device" while the string for the Swan ADFU is USB 2.0 (FS) ADFU Device. So, I was not able to install the device because it was not compatible with my hardware.

I have tried just to modify this line, changing the ff51 to ff61. The player got recognized, but the s1flash did not work... It keeps me given the same message "failed to open device". It seems to me that the driver does not work with this ADFU device.

Am I right? Do someone have any idea?

Thanks

I have the same problem Alair
The flash program dont work with the clone i´m trying to repair. The product ID in the INF is different, and editing it i get the same error.
Maybe we have to wait a second release of S1FLASH.

Happy|Harry · #20 (**permalink**) 10th Apr 2007, 11:27 am

Quote:

Originally Posted by CoYoTe";p=&quot

Quote:

Originally Posted by Alair

Fellows,

Some players could not be used with the Swan ADFU driver. In the driver's info file there is the following line:

"Swan ADFU Driver"=LIBUSB_DEV, USB\VID_10d6&PID_ff51

The problem is that my player is a USB\VID_10d6&PID_ff61 device. The string used to identify my player is "USB 2.0 (HS) ADFU Device" while the string for the Swan ADFU is USB 2.0 (FS) ADFU Device. So, I was not able to install the device because it was not compatible with my hardware.

I have tried just to modify this line, changing the ff51 to ff61. The player got recognized, but the s1flash did not work... It keeps me given the same message "failed to open device". It seems to me that the driver does not work with this ADFU device.

Am I right? Do someone have any idea?

Thanks

I have the same problem Alair
The flash program dont work with the clone i´m trying to repair. The product ID in the INF is different, and editing it i get the same error.
Maybe we have to wait a second release of S1FLASH.

i was so excited when i saw this post, i thought i'd finally be able to get my second MP3 player working by copying the first ones flash,

but unfortunately i have this same problem as CoYoTe and Alair, so that makes 3 of us lol