Glacier clone

malagutti · #1 (**permalink**) 23rd Aug 2007, 7:11 am

Hello all!

I have a Glacier clone with board ID QY-066FV0 2007.05.11. I have tested many, a lot, of firmwares (including alexpb packs), but none worked. Anyone have one player with same board ID to send me a full firmware? Thanks.

lattesurf · #2 (**permalink**) 23rd Aug 2007, 7:31 am

malagutti , try to identify the processor's serial number (ATJ2097, ATJ2085, etc) first so it'll be easier to locate the compatible group of firmwares.

malagutti · #3 (**permalink**) 23rd Aug 2007, 8:00 am

Quote:

Originally Posted by lattesurf";p=&quot

malagutti , try to identify the processor's serial number (ATJ2097, ATJ2085, etc) first so it'll be easier to locate the compatible group of firmwares.

The only number printed in the processor is AK1025.

lattesurf · #4 (**permalink**) 23rd Aug 2007, 8:25 am

malagutti , the recent batches of players uses the AK chipsets. i don't have any idea if it belongs to the Actions family, as i could not find any information about it on the internet.

However, you could try the v9.0.xx series firmwares here http://www.mympxplayer.org/actions-9...mare-dc37.html
As some users reportedly uses the v9.0.xx firmwares.

Omega · #5 (**permalink**) 25th Aug 2007, 12:38 pm

Quote:

Originally Posted by lattesurf";p=&quot

malagutti , the recent batches of players uses the AK chipsets. i don't have any idea if it belongs to the Actions family, as i could not find any information about it on the internet.

However, you could try the v9.0.xx series firmwares here http://www.mympxplayer.org/actions-9...mare-dc37.html
As some users reportedly uses the v9.0.xx firmwares.

i need glacier firmware update chip: CTW500 there the image

lattesurf · #6 (**permalink**) 25th Aug 2007, 7:01 pm

Omega , you'll need the v9.0.xx series firmwares here http://www.mympxplayer.org/actions-9...mare-dc37.html

As there is no way of telling which firmware would work properly with your player, you'll need to try all of them.

Good luck.

Lordcatbert · #7 (**permalink**) 1st Oct 2007, 4:31 pm

I wish I would have seen this post a few days ago. I have the same board set but my player also just died.

I'm in the middle of a dispute with the seller, so I'm debating on whether or not to send it back.

Right now I've tried every firmware I could for this thing and now I'm to a point where I must have used a wrong one because it freezes at the Loading Communications Screen while trying to download firmware.

Any ideas?